Honeywell K35891 Manual

 
– 51 – 
Summary of Audible/Visual Notifications 
Fixed-Word Display Keypads  
SOUND CAUSE  DISPLAY 
LOUD, 
INTERRUPTED*
 
Keypad & Ext. FIRE ALARM or CO ALARM (CO: 
keypad/detector only; not external 
sounder) FIREor ALARM (for CO) is displayed; zone 
number of zone in alarm is displayed. If a fire 
alarm is manually activated, zone number 95 
will be displayed.  
LOUD, 
CONTINUOUS*
 
Keypad & Ext. BURGLARY/AUDIBLE  
EMERGENCY ALARM  ALARM is displayed. Zone number of zone 
in alarm is also displayed....

 
– 52 – 
Summary of A/V Notifications (cont’d) 
Alpha Display Keypads 
SOUND CAUSE  DISPLAY 
LOUD, 
INTERRUPTED* 
Keypad & Ext. FIRE ALARM or CO ALARM 
(CO: keypad/detector only; not 
external sounder) FIREor ALARM (for CO) is displayed; 
descriptor of zone in alarm is displayed. If a fire 
alarm is manually activated, zone number 95 will 
be displayed.   
LOUD, 
CONTINUOUS* 
Keypad & Ext. BURGLARY/AUDIBLE  
EMERGENCY ALARM ALARM is displayed. If programmed, descriptor 
of zone in alarm is also...

 
– 53 – 
Regulatory Statements and Warnings 
 
   
FEDERAL COMMUNICATIONS COMMISSION STATEMENTS The user shall not make any changes or modifications to the equipment unless authorized by the Installation Instructions or Users Manual. Unauthorized changes or modifications could void the users authority to operate the equipment.  CLASS B DIGITAL DEVICE STATEMENT This equipment has been tested to FCC requirements and has been found acceptable for use. The FCC requires the following statement for your...

 
– 54 – 
Regulatory Statements (cont’d) 
 
Industry Canada (continued)
 Before installing this equipment, users should ensure that it is permissible to be connected to the facilities of the local telecommunications company. The equipment must also be installed using an acceptable method of connection. The customer should be aware that compliance with the above conditions may not prevent degradation of service in some situations.  Repairs to certified equipment should be coordinated by a representative...

 
– 55 – 
System Features Log 
 
 
Features  Comments 
Exit Delay Part. 1:  Part. 2: 
Entry Delay 1 Part. 1:  Part. 2: 
Entry Delay 2 Part. 1:  Part. 2: 
NIGHT-STAY Zones Zones: 
Quick Arm yes no 
Quick Bypass yes no 
Automatic Paging yes no users: 
Keyswitch Arming 
(circle type of LED lighting) Arm AWAY:  steady  flash 
Arm STAY:  steady  flash 
 
Function Keys  A B C D Comments 
• Single-Button Arming      
• Step Arming       
• Paging (see Paging chart)      
• Time/Date Display      
• Macro Key 1...

 
– 56 – 
System Features Log (cont’d) 
User Setup 
The following chart will help keep track of system users. Copies should be distributed to the 
partition 1 and partition 2 (if applicable) masters for their records. 
 
To program a user attribute:  
Enter system/partition* master code + [8] + user no. + “#” command listed in column heading. 
 User 
No. User 
Name User’s Part(s).(system master only)[#] [3] + part(s) + [#] 
Security 
Code 
enter new code
Auth.
Level 
[#] [1] + level 
Access 
Group 
[#]...

 
– 57 – 
System Features Log (cont’d) 
User Setup (cont’d)  
Enter system/partition master code + [8] + user no. + “#” command listed in column heading. 
User 
No.
* User 
Name User’s Part(s).(system master only)[#] [3] + part(s) + [#] 
Security 
Code 
enter new code
Auth.
Level 
[#] [1] + level 
Access 
Group 
[#] [2] + group 
RF Zone 
Number 
[#] [4] + zone no. 
Pager
on/off 
[#] [5] + 0/1
33 partition 2 master  (2)   (4)     (1)
34   (2)   (0)     (1)
35   (2)   (0)     (1)
36   (2)   (0)     (1)
37...

 
– 58 – 
System Features Log (cont’d) 
Schedules*: master code + [#] + [6] [4] 
No. Event  Device No. Group No. Partition  Start  Stop  Repeat Random 
  (see list below)  for “01” events:  for “02” events:  for “04-06” events: Time/ Time/ (1-4)  (yes/no) 
  (see device list below)  enter 1-8  enter 1, 2, or 3 Day Day 
01 
02 
03 
04 
05 
06 
07 
08 
09 
10 
11 
12 
13 
14 
15 
16 
Events:  00 = clear event  03 = latch key report   06 = auto disarm    
  01 = device on/off  04 = forced STAY arm  07 =...

 
– 59 – 
 
 
 
OWNER’S INSURANCE PREMIUM CREDIT REQUEST 
 
This form should be completed and forwarded to your homeowner’s insurance carrier for possible 
premium credit.  
A. GENERAL INFORMATION: 
Insured’s Name and Address:    
   
 
Insurance Company: Policy No.:    
 
VISTA-21iP / VISTA-21iPSIA _______________________________________________ Other    
(circle the appropriate model number) 
Type of Alarm:         Burglary       Fire       Both 
  
Installed by: Serviced by:     Name  Name...

 
– 60 –  
 
OWNER’S INSURANCE PREMIUM CREDIT REQUEST 
(cont.) 
 
E. SMOKE DETECTOR LOCATIONS 
      Furnace Room       Kitchen         Bedrooms         Attic  
      Basement           Living Room        Dining Room         Hall  
 
F. BURGLARY DETECTING DEVICE LOCATIONS: 
      Front Door          Basement Door         Rear Door         All Exterior Doors 
       1st Floor Windows        All windows         Interior  locations 
       All Accessible Openings, Including Skylights, Air Conditioners and...