HP Vm200 User Manual

Maintenance
Software updates
9-3
2.Under Restore configuration, select Browse to navigate to the configuration file that 
you want to restore. 
3.To upload the selected file to the V-M200, select Restore. 
NoteThe V-M200 automatically restarts when the upload is completed.
Reset configuration
See Appendix B: Resetting to factory defaults on page B-1.
Software updates
To update the V-M200 software, select Maintenance > Software updates.
CautionBefore updating be sure to check for update issues in the...

Maintenance
Software updates
9-4 

Appendix A: Regulatory statements
A
Regulatory statements
Contents
Industry Canada statement ................................................................................. A-2
Conformité Européene — CE marking.............................................................. A-2 

Regulatory statements
A-2
Industry Canada statement
This device complies with RSS-210 of the Industry Canada Rules. Operation is subject to the 
following two conditions: (1) This device may not cause harmful interference, and (2) this 
device must accept any interference received, including interference that may cause 
undesired operation.
Règlement d’Industry Canada 
Les conditions de fonctionnement sont sujettes à deux conditions:
1.Ce périphérique ne doit pas causer d’interférence et.
2.Ce...

V-M200 802.11n Access Point Management and Configuration Guide
A-3
Electromagnetic compatibility and Radio Spectrum Matters (ERM); ElectroMagnetic 
Compatibility (EMC) standard for radio equipment and services; Part 1: Common technical 
requirements
EN 301 489-17 V2.1.1 
Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic 
Compatibility (EMC) standard for radio equipment and services; Part 17: Specific conditions 
for Broadband Data Transmission Systems
This device is a 2.4...

Regulatory statements
A-4 

Appendix B: Resetting to factory defaults
B
Resetting to factory defaults
Contents
Factory reset procedures ........................................................................................... B-2
Using the reset button.......................................................................................... B-2
Using the management tool................................................................................. B-2 

Resetting to factory defaults
Factory reset procedures
B-2
Factory reset procedures
To force the V-M200 into its factory default state, follow the procedures in this section.
CautionResetting the V-M200 to factory defaults deletes all configuration settings, resets the manager 
user name and password to admin, and enables the DHCP client on the Ethernet port. If no 
DHCP server assigns an address to the V-M200, its address defaults to 192.168.1.1. 
Using the reset button
Using a tool such as a paper...

 
 
  
August 2010 
Manual Part Number
5998-0296   
Technology for better business outcomes 
To learn more, visit www.hp.com/networking
© Copyright 2010 Hewlett-Packard Development Company, L.P. The information  
contained herein is subject to change without notice. The only warranties for HP products 
and services are set forth in the express warranty statements accompanying such products 
and services. Nothing herein should be construed as constituting an additional warranty. 
HP will not be liable for...