JBL Sdp5 Manual
Have a look at the manual JBL Sdp5 Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 57 JBL manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
SETUPJBL Synthesis 3-52 BACKGROUNDON, OFF Activates and deactivates the menu background. When set to ON, on-screen display menus appear over a solid blue or gray background (depending on the display device). When set to OFF, on-screen display menus appear over the video input signal. Note: When the BACKGROUND parameter is set to OFF, the on-screen display will disappear if the display device is using the component video output connector. BACKGROUNDON-SCREEN DISPLAYDISPLAYSSETUP REMOTE STATEON, OFF Controls the remote control command bank indicator that appears on the on-screen display. When set to ON, a command bank indicator appears in the top-right corner of the on-screen display to indicate the last command bank from which the SDP-5 received a command. When set to OFF, no command bank indicator appears on the on-screen display. A Z appears when a command from the Zone 2 command bank was received last. An S appears when a command from the Shift command bank was received last. No letter appears when a com- mand from the Main Zone command bank was received last. REMOTE STATEON-SCREEN DISPLAYDISPLAYSSETUP MAIN MENU MODE ADJUST AUDIO CONTROLS SETUP SETUP SETUP INPUTS SPEAKERS REAR PANEL CONFIG DISPLAYS VOLUME CONTROLS TRIGGER LOCK OPTIONS DISPLAYS DISPLAY SETUP ON-SCREEN DISPLAY FRONT PANEL DISPLAY A/V SYNC DELAY OFF CUSTOM NAME OFF EDIT CUSTOM NAMEON-SCREEN DISPLAY ON-SCREEN DISPLAY STATUS 2 SECONDS POSITION TOP FORMAT NTSC BACKGROUND ON REMOTE STATE ON BACKGROUND ON ON OFF MAIN MENU MODE ADJUST AUDIO CONTROLS SETUP SETUP SETUP INPUTS SPEAKERS REAR PANEL CONFIG DISPLAYS VOLUME CONTROLS TRIGGER LOCK OPTIONS DISPLAYS DISPLAY SETUP ON-SCREEN DISPLAY FRONT PANEL DISPLAY A/V SYNC DELAY OFF CUSTOM NAME OFF EDIT CUSTOM NAMEON-SCREEN DISPLAY ON-SCREEN DISPLAY STATUS 2 SECONDS POSITION TOP FORMAT NTSC BACKGROUND ON REMOTE STATE ON REMOTE STATE ON ON OFF
SETUPSDP-5 3-53 FRONT PANEL DISPLAY SETUP Opens the FRONT PANEL DISPLAY menu shown above, which can be used to customize the front panel display. Default Possible Parameter Setting Settings STATUS ALWAYS ON ALWAYS ON, 2 SECONDS, ALWAYS OFF BRIGHTNESS 75% 100%, 75%, 50%, 25% STATUSALWAYS ON, 2 SECONDS, ALWAYS OFF Activates and deactivates the front panel display. When set to ALWAYS ON, the front panel display remains on at all times. When set to 2 SECONDS, the front panel display appears for 2 seconds STATUSFRONT PANEL DISPLAYDISPLAYSSETUP FRONT PANEL DISPLAYDISPLAYSSETUP FRONT PANEL DISPLAY STATUS ALWAYS ON BRIGHTNESS 75%MAIN MENU MODE ADJUST AUDIO CONTROLS SETUP SETUP SETUP INPUTS SPEAKERS REAR PANEL CONFIG DISPLAYS VOLUME CONTROLS TRIGGER LOCK OPTIONS DISPLAYS DISPLAY SETUP ON-SCREEN DISPLAY FRONT PANEL DISPLAY A/V SYNC DELAY OFF CUSTOM NAME OFF EDIT CUSTOM NAME FRONT PANEL DISPLAY STATUS ALWAYS ON ALWAYS ON 2 SECONDS ALWAYS OFF FRONT PANEL DISPLAY STATUS ALWAYS ON BRIGHTNESS 100%MAIN MENU MODE ADJUST AUDIO CONTROLS SETUP SETUP SETUP INPUTS SPEAKERS REAR PANEL CONFIG DISPLAYS VOLUME CONTROLS TRIGGER LOCK OPTIONS DISPLAYS DISPLAY SETUP ON-SCREEN DISPLAY FRONT PANEL DISPLAY A/V SYNC DELAY OFF CUSTOM NAME OFF EDIT CUSTOM NAME FRONT DISPLAY BRIGHTNESS 75% 100% 75% 50% 25% whenever the input source changes or the SDP-5 receives a command. When set to ALWAYS OFF, the front panel display remains off at all times. Note: When the FRONT PANEL DISPLAY menu STATUS parameter is set to ALWAYS OFF, the front panel display immediately disappears. Press the remote control FP button or use the on-screen display as a guide to reset the parameter to ALWAYS ON or 2 SECONDS. BRIGHTNESS100%, 75%, 50%, 25% Controls the brightness of front panel display characters. When a setting is selected, front panel display illumination automatically adjusts to the selected brightness. BRIGHTNESSFRONT PANEL DISPLAYDISPLAYSSETUP
SETUPJBL Synthesis 3-54 VOLUME CONTROL SETUP Selecting the SETUP menu VOLUME CONTROLS option opens the VOLUME CONTROL SETUP menu shown below, which can be used to configure Main Zone and Zone 2 volume levels. VOLUME CONTROLSSETUP Default Possible Parameter Setting Settings MAIN PWR ON -30dB LAST LVL, -80 to +6dB MUTE LEVEL FULL MUTE FULL MUTE, -40dB, -30dB, -20dB, -10dB ZONE PWR ON -30dB LAST LVL, -80 to +6dB MAIN PWR ONLAST LVL, -80 to +6dB Sets the Main Zone volume level that will be selected whenever the Main Zone is activated. When set to LAST LVL, the Main Zone will activate at the last volume level that was selected in that zone during the previous operating session. MAIN PWR ONVOLUME CONTROLSSETUP MAIN MENU MODE ADJUST AUDIO CONTROLS SETUP SETUP SETUP INPUTS SPEAKERS REAR PANEL CONFIG DISPLAYS VOLUME CONTROLS TRIGGER LOCK OPTIONS VOLUME CONTROLS -10dB -20dB -30dB -40dB FULL MUTELAST LVL, -80 to +6dBVOLUME CONTROL SETUP MAIN PWR ON -30dB MUTE LEVEL FULL MUTE ZONE PWR ON -30dBMAIN PWR ON -30dB ZONE PWR ON -30dB VOLUME CONTROL SETUP MAIN PWR ON -30dB MUTE LEVEL -30dB ZONE PWR ON -30dB MUTE LEVEL FULL MUTE MUTE LEVELFULL MUTE, -40dB, -30dB, -20dB, -10dB Sets the amount of attenuation that occurs in the Main Zone whenever the front panel or remote control Mute button is pressed. When set to FULL MUTE, Main Zone volume level will be fully attenuated whenever the front panel or remote control Mute button is pressed. Otherwise, Main Zone volume level will be attenuated to the selected level. ZONE PWR ONLAST LVL, -80 to +6dB Sets the Zone 2 volume level that will be selected whenever Zone 2 is activated. When set to LAST LVL, Zone 2 will activate at the last volume level that was selected in that zone during the previous operating session. ZONE PWR ONVOLUME CONTROLSSETUP MUTE LEVELVOLUME CONTROLSSETUP
SETUPSDP-5 3-55 PWR – the power trigger output connector – is not configurable. It is activated when the SDP-5 is activated, and deactivated when the SDP-5 is deactivated. The trigger output connector labeled 1 can be configured for remote or program operation. Default Possible Parameter Setting Settings REMOTE ONLY OFF ON, OFF Program Operation N/A ON, OFF All TRIGGER SETUP menu parameters – except the REMOTE ONLY parameter – are considered program operation parameters. REMOTE ONLYON, OFF Configures the trigger output connector labeled 1 for remote operation. When set to ON, this connector is configured for remote operation. When the Zone 2 command bank is activated, it can be activated and deactivated with the remote control Mode and buttons (2-14). The SDP-5 ignores all other TRIGGER SETUP menu parameter settings. When set to OFF, the trigger output connector labeled 1 is not configured for remote operation. It can be configured for program operation. Refer to the next page for more information about configuring the trigger output connector labeled 1 for program operation. REMOTE ONLYTRIGGERSETUP TRIGGER SETUP Selecting the SETUP menu TRIGGER option opens the TRIGGER SETUP menu shown at the right, which can be used to configure the trigger output connector labeled 1. The SDP-5 rear panel houses two 12V DC trigger output connectors. The connector labeled TRIGGERSETUP TRIGGER SETUP REMOTE ONLY ON DVD1 OFF DVD2 OFF SAT OFF VCR OFF TV OFF CD OFF TUNER OFF AUX OFF ZONE2 INPUTS OFF L7FILM ON L7TV ON L7MUSIC ON L7MUSIC SURR ON %!PLII + THXON %!PLII MOVIE ON %!PLII MUSIC ON %!PRO LOGIC ON dts neo:6 FILM ON dts neo:6 MUSIC ON NIGHTCLUB ON CONCERT HALL ON CHURCH ON CATHEDRAL ON PANORAMA ON PARTY ON 2-CHANNEL OFF MONO LOGIC ON MONO SURROUND ON MONO ON 5.1 L7FILM ON 5.1 L7TV ON 5.1 L7MUSIC ON 5.1 THXISurEX ON 5.1 THXIMUSIC ON %! DIGITAL EX ON 5.1 2-CHANNEL OFF 5.1 MONO LOGIC ON 5.1 MONO SURR ON 5.1 MONO ON DTS-ES L7FILM ON DTS-ES L7MUSIC ON DTS-ES THXON DTS THXIMUSIC ON DTS-ESON DTS-ES2-CHAN OFF 5.1a BYPASS ON 2CH BYPASS OFFMAIN MENU MODE ADJUST AUDIO CONTROLS SETUP SETUP SETUP INPUTS SPEAKERS REAR PANEL CONFIG DISPLAYS VOLUME CONTROLS TRIGGER LOCK OPTIONS TRIGGER REMOTE ONLY OFF ON OFF *TRIGGER SETUP menu listening mode names are fixed, meaning these names do not change when certain encoding is present. For instance, the 5.1 THX SurEX listening mode label appears whether THX Ultra2, THX Surround EX, or no encoding is engaged.
SETUPJBL Synthesis 3-56 When the REMOTE ONLY parameter is set to OFF and program operation parameters are set to ON, the trigger output connector labeled 1 is associated with the corresponding Main Zone input, Main Zone listening modes, or Zone 2 inputs. (The connector cannot be associated with individual Zone 2 inputs; rather, it can be associated with the Zone 2 inputs as a group.) When configured for program operation, the connector is activated when the corresponding inputs and listening modes are selected and deactivated when the corresponding inputs and listening modes are deselected. Note: When the CUSTOM menu RESET MODE option is selected to restore the factory- default version of the selected listening mode, the corresponding TRIGGER SETUP menu listening mode parameter is automatically set to OFF. Program Operation ParametersON, OFF Configure the trigger output connector labeled 1 for program operation. All TRIGGER SETUP menu parameters – except the REMOTE ONLY parameter – are considered program operation parameters. The connector can be associated with multiple inputs and listening modes at the same time. (PROGRAM OPERATION PARAMETER)TRIGGERSETUP TRIGGER SETUP REMOTE ONLY OFF DVD1 OFF DVD2 OFF SAT OFF VCR OFF TV OFF CD OFF TUNER OFF AUX OFF ZONE2 INPUTS OFF L7FILM OFF L7TV OFF L7MUSIC OFF L7MUSIC SURR OFF %!PLII + THX OFF %!PLII MOVIE OFF %!PLII MUSIC OFF %!PRO LOGIC OFF dts neo:6 FILM OFF dts neo:6 MUSIC OFF NIGHTCLUB OFF CONCERT HALL OFF CHURCH OFF CATHEDRAL OFF PANORAMA OFF PARTYOFF 2-CHANNEL OFF MONO LOGIC OFF MONO SURROUND OFF MONO OFF 5.1 L7FILM OFF 5.1 L7TV OFF 5.1 L7MUSIC OFF 5.1 THXISurEX OFF 5.1 THXIMUSIC OFF %!DIGITAL EX OFF 5.1 2-CHANNEL OFF 5.1 MONO LOGIC OFF 5.1 MONO SURR OFF 5.1 MONO OFF DTS-ES L7FILM OFF DTS-ES L7MUSIC OFF DTS-ES THXOFF DTS THXIMUSIC OFF DTS-ESOFF DTS-ES2-CHAN OFF 5.1a BYPASS OFF 2CH BYPASS OFFMAIN MENU MODE ADJUST AUDIO CONTROLS SETUP SETUP SETUP INPUTS SPEAKERS REAR PANEL CONFIG DISPLAYS VOLUME CONTROLS TRIGGER LOCK OPTIONS TRIGGER DVD1 OFFDVD2 OFFSAT OFFVCR OFFTV OFFCD OFFTUNER OFFAUX OFFZONE2 INPUTS OFF NIGHTCLUB ONCONCERT HALL ONCHURCH ONCATHEDRAL ONPANORAMA ONPARTY ON2-CHANNEL OFFMONO LOGIC ONMONO SURROUND ONMONO ON 5.1 2-CHANNEL OFF5.1 MONO LOGIC ON5.1 MONO SURR ON5.1 MONO ON 5.1a BYPASS ON2CH BYPASS OFF L7FILM ON ON OFF L7TV ONL7MUSIC ON 5.1 L7FILM ON DTS-ES L7 FILM ON 5.1 THXISurEX ON5.1 THXIMUSIC ON 5.1 L7MUSIC ON5.1 L7TV ON L7MUSIC SURR ON %!PLII MOVIE ON%!PLII MUSIC ON%!PRO LOGIC ON %!DIGITAL EX ON %!PLII + THXON dts neo:6 FILM ONR dts neo:6 MUSIC ONR DTS-ESONDTS-ES2-CHAN OFF DTS-ES L7 MUSIC ONDTS-ES THX MUSIC ONDTS THX MUSIC ON *TRIGGER SETUP menu listening mode names are fixed, meaning these names do not change when certain encoding is present. For instance, the 5.1 THX SurEX listening mode label appears whether THX Ultra2, THX Surround EX, or no encoding is engaged.
SETUPSDP-5 3-57 Default Possible Parameter Setting Settings MODES UNLOCKED LOCKED, UNLOCKED AUDIO CNTRL UNLOCKED LOCKED, UNLOCKED SETUP UNLOCKED LOCKED, UNLOCKED MODESLOCKED, UNLOCKED Controls MODE ADJUST menu branch settings, which include all listening mode menu settings. When set to LOCKED, these settings cannot be adjusted. When set to UNLOCKED, these settings can be adjusted. MODESLOCK OPTIONSSETUP AUDIO CNTRLLOCKED, UNLOCKED Controls AUDIO CONTROLS menu branch settings. When set to LOCKED, these settings cannot be adjusted. When set to UNLOCKED, these settings can be adjusted. SETUPLOCKED, UNLOCKED Controls SETUP menu branch settings. When set to LOCKED, these settings cannot be adjusted. When set to UNLOCKED, these settings can be adjusted. SETUPLOCK OPTIONSSETUP AUDIO CNTRLLOCK OPTIONSSETUP MAIN MENU MODE ADJUST AUDIO CONTROLS SETUP SETUP SETUP INPUTS SPEAKERS REAR PANEL CONFIG DISPLAYS VOLUME CONTROLS TRIGGER LOCK OPTIONS LOCK OPTIONS LOCKED UNLOCKEDLOCK OPTIONS MODES UNLOCKED AUDIO CNTRL UNLOCKED SETUP UNLOCKEDMODES UNLOCKEDAUDIO CNTRL UNLOCKEDSETUP UNLOCKED LOCK OPTIONS Selecting the SETUP menu LOCK OPTIONS option opens the LOCK OPTIONS menu shown below, which can be used to lock and unlock settings in the MODE ADJUST, AUDIO CONTROLS, and SETUP menu branches. LOCK OPTIONSSETUP
4 AUDIO CONTROLS AUDIO CONTROLS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-2
BASS-6.0 to +6.0dB Controls the amount of low-frequency boost or cut applied to the Main Zone audio output connectors labeled Front L/R, Center, and Subwoofer. The graph shown on the left of the next page illustrates the frequency response of BASS parameter settings. TREBLE-6.0 to +6.0dB Controls the amount of boost or cut applied to the Main Zone audio output connectors labeled Front L/R and Center. The graph shown on the right of the next page illustrates the frequency response of TREBLE parameter settings. TREBLEAUDIO CONTROLS BASSAUDIO CONTROLS Default Possible Parameter Value Settings BASS +0.0dB -6.0 to +6.0dB TREBLE +0.0dB -6.0 to +6.0dB TILT EQ +0.0dB -3.0 to +3.0dB LOUDNESS ON ON, OFF BALANCE L< to to >R FADER B< to to >F ZONE2 BALANCE L< to to >R AUDIO CONTROLS menu parameter descriptions begin in the next column. Note: When the Zone 2 command bank is activated, pressing the remote control Blue button sets the BASS, TREBLE, and TILT EQ parameters to +0.0dB. AUDIO CONTROLSJBL Synthesis 4-2 AUDIO CONTROLS Selecting the MAIN MENU AUDIO CONTROLS option opens the AUDIO CONTROLS menu shown below, which can be used to customize the Main Zone audio output connectors and control the balance of the Zone 2 audio output connectors. The BASS, TREBLE, TILT EQ, LOUDNESS, BALANCE, and FADER parameters affect the Main Zone audio output connectors. These parameter settings affect all inputs and listening modes selected in the Main Zone, except the 5.1a BYPASS and 2CH BYPASS listening modes. The ZONE2 BALANCE parameter controls the balance of the Zone 2 audio output connectors. This parameter setting affects all inputs selected in Zone 2. MAIN MENU MODE ADJUST AUDIO CONTROLS SETUP AUDIO CONTROLS AUDIO CONTROLS BASS +0.0dB TREBLE +0.0dB TILT EQ +0.0dB LOUDNESS ON BALANCE FADER ZONE2 BALANCE -6.0 to +6.0dB BASS +0.0dBTREBLE +0.0dB
AUDIO CONTROLSSDP-5 4-3 10 20 50 100 200 5001k 2k 5k 10k 20kHz +6.0 +5.5 +5.0 +4.5 +4.0 +3.5 +3.0 +2.5 +2.0 +1.5 +1.0 +0.5 +0.0 -0.5 -1.0 -1.5 -2.0 -2.5 -3.0 -3.5 -4.0 -4.5 -5.0 -5.5 -6.0+0.0 BASS Parameter Settings The BASS parameter (previous page) controls the amount of low-frequency boost or cut applied to the Main Zone audio output connectors labeled Front L/R, Center, and Subwoofer. 10 20 50 100 200 5001k 2k 5k 10k 20k Hz +0.0+6.0 +5.5 +5.0 +4.5 +4.0 +3.5 +3.0 +2.5 +2.0 +1.5 +1.0 +0.5 +0.0 -0.5 -1.0 -1.5 -2.0 -2.5 -3.0 -3.5 -4.0 -4.5 -5.0 -5.5 -6.0 TREBLE Parameter Settings The TREBLE parameter (previous page) controls the amount of boost or cut applied to the Main Zone audio output connectors labeled Front L/R and Center. . . . AUDIO CONTROLS continues on page 4-4