Land Rover Body And Paint Air Bag And Safety Belt Rover Manual
Have a look at the manual Land Rover Body And Paint Air Bag And Safety Belt Rover Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 364 Land Rover manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
Front RH tweeter3 Front RH mid range speaker4 Premium amplifier5 Front RH bass speaker6 Rear RH tweeter7 Rear RH mid/bass range speaker8 Rear RH surround speaker9 Sub-woofer10 Rear LH surround speaker11 Rear LH mid/bass range speaker12 Rear LH tweeter13 Front LH bass speaker14 Front LH mid range speaker15 The Premium Audio - Harman/Kardon LOGIC7 audio speaker system is driven by an amplifier located under the RH front seat. The amplifier is controlled by the Integrated Head Unit (IHU) on the MOST bus and supplies 12x50 watts output, giving a total system power rating of 600 watts. The system comprises: •Integrated Head Unit (IHU) Head unit •Two front door mounted mid range speakers (one per side) •Two front door mounted bass speakers (one per side) •Two front door mounted tweeters (one per side) •Two rear door mounted mid/bass range speakers (one per side) •Two rear door mounted tweeters (one per side) •A sub-woofer located in the lower tailgate •Two rear surround speakers •One centre fill speaker located in the centre of the instrument panel •Premium amplifier SpeakersLesson 2 – Electrical 155Technical Training (G421267)
Tick the correct answer or fill in the gaps. 1.What type of air conditioning compressor is fitted to the vehicle? a.A pulley-less compressor b.A scroll type c.A clutch-less compressor d.A 10 piston radial type 2.What precautions must be taken when fitting a new receiver dryer? .............................................................................................................................................................................. 3.How many pistons does the air conditioning compressor have? a.5 b.7 c.9 d.None 4.List the three benefits of the new air conditioning compressor. .............................................................................................................................................................................. .............................................................................................................................................................................. .............................................................................................................................................................................. .............................................................................................................................................................................. .............................................................................................................................................................................. .............................................................................................................................................................................. Lesson 2 – ElectricalTest questions 225Technical Training (G420633)
5.What are the quantities of oil and gas used on a vehicle fitted with a diesel and auxiliary climate control system? a.130 cc oil, 900 grammes of refrigerant b.170 cc oil, 900 grammes of refrigerant c.130 cc oil, 810 grammes of refrigerant d.170 cc oil, 550 grammes of refrigerant e.170 cc oil, 810 grammes of refrigerant 6.Where is the auxiliary climate control assembly located? a.Behind the RHR quarter panel b.In the rear of the roof lining c.Behind the LHR quarter panel d.Underneath the drivers seat 7.How many stepper motors are fitted to the auxiliary climate control assembly? a.1 b.2 c.3 d.4 8.Briefly explain how the cool box is cooled? .............................................................................................................................................................................. 9.What additional sensors are installed to the automatic air conditioning system compared to the manual system? .............................................................................................................................................................................. (G420633) Technical Training226 Test questionsLesson 2 – Electrical
10.What does the acronym ATCM mean? a.Automatic Temperature Control Module b.Air conditioning Temperature Control Module c.All Terrain Control Module d.Automatic Temperature Calculating Module 11.Which communication networks does the ATCM use? a.High speed CAN and LIN b.Medium speed CAN and LIN c.High speed CAN and medium speed CAN d.Is just hard wired and does not communicate on any high speed network 12.Which of the following are not used by electrical load management? a.Cold start table b.Hot start table c.High humidity table d.Continuous table 13.Which of the following options is not a valid built in diagnostic of the Discovery 3 Integrated Head Unit (IHU)? a.Security. b.Set-up. c.Screen. d.Test. Lesson 2 – ElectricalTest questions 227Technical Training (G420633)
14.The Premium audio system fitted to the Discovery 3, communicates with the rest of the entertainment system on the .................... bus. 15.The printed monopole SDARS antenna recieves ........................................................ SDARS signals. 16.What connects the GPS antenna with the navigation computer? a.The antenna is hardwired b.The antenna is on the MOST ring c.The antenna is connected on the CAN bus d.A single co-axial cable 17.How many different speaker configurations are there on the MOST audio systems? a.One b.Two c.Three d.Four 18.How do the rear seat remote headphone modules communicate with the RSE control module? a.They use an RF transmission to the RSE control module b.They use an infrared transmission to the RSE control module c.They are hard wired into the RSE control module d.Each unit is on the CAN bus 19.The television display on the TSD will stop displaying when the vehicle reaches .....kph. 20.How many headlamp options are available? a.3 b.2 c.4 d.5 (G420633) Technical Training228 Test questionsLesson 2 – Electrical
21.What is the wattage of the cornering lamp bulb? a.55 Watt b.25 Watt c.35 Watt d.45 Watt 22.How many modes of operation does the AFS have? a.3 b.2 c.5 d.4 23.When is the AFS initialised? a.At each ignition on cycle b.At each engine running cycle c.Each time the headlamps are operated d.Each time the steering is in the centralised position 24.What benefit does the AFS provide? .............................................................................................................................................................................. 25.The Integrated Head Unit (IHU) is the timing master for the MOST bus. Which other bus system is the IHU connected to? a.Medium speed CAN b.High speed CAN c.LIN bus d.GVIF bus Lesson 2 – ElectricalTest questions 229Technical Training (G420633)
26.Which electronic control modules terminate the ends of the medium speed CAN bus? a.The ABS control module and the Instrument cluster b.The instrument cluster and the electric park brake module c.The ABS control module and the Engine Control Module d.The instrument cluster and the central junction box 27.The minimum bend radius of a MOST fibre optic cable is..........mm. 28.What is the recommended minimum time from ignition off to battery disconnect on a vehicle with a navigation system? a.1 Minute b.3 Minutes c.4 Minutes d.5 Minutes 29.The vehicle navigation computer transmits video to the Touch Screen Display via the .................... bus. 30.Where does the navigation computer receive its road speed signal from? a.Hard wired from the front RH wheel speed sensor. b.Hard wired from the front LH wheel speed sensor. c.A buffered average of all the wheel speed sensors from the ABS control module . d.From the front RH and rear LH wheel speed sensor via the ABS control module. 31.How many satellites does the GPS navigation system need to see to enable a 3 dimensional fix? a.Two b.Three c.Four d.Five (G420633) Technical Training230 Test questionsLesson 2 – Electrical
32.Which of the following cellular phone functions is not available when using a phone connected via Bluetooth® to the Transceiver Module? a.Make a phone call b.Receive a phone call c.List missed calls d.Use the hands free system in the vehicle 33.In a vehicle without navigation the voice recognition system is hosted in the ......................................................................................................................................whereas a vehicle with navigation hosts voice recognition in the ................................................................................................. and the ............................................................................................................................................ Lesson 2 – ElectricalTest questions 231Technical Training (G420633)
Tick the correct answer or fill in the gaps. 1.What is the difference in the configuration of the second row of seats between a vehicle with five seats and a vehicle fitted with the seven seat option? a.The five seat variant is a 35/30/35 split, whereas the seven seat variant is a 60/40 split b.The five seat variant is a 50/50 split, whereas the seven seat variant is a 35/30/35 split c.The five seat variant is a 60/40 split, whereas the seven seat variant is a 35/30/35 split d.The five seat variant is a 60/40 split, whereas the seven seat variant is a 50/50 split 2.For all seat motor manual movements, whenever a motor is driven and a stall occurs, .................................................................................................................................................................................................................................................................................................................................................................................................. 3.Which one of the following operations would induce a double chime audible confirmation? a.Reverse gear memory position store b.Memory recall c.Reverse gear mirror position feature is toggled ON d.Memory store 4.Customers are completely satisfied when: a.The price is cheap. b.Staff are polite to them. c.Their expectations are fully met d.The work is done on time 5.How will the drivers seat position sensor affect airbag deployment in the event of a crash? a.Providing the drivers seat is forward of a pre-determined position, the drivers and passenger airbag will not be deployed b.Providing the drivers seat is forward of a pre-determined position, the drivers airbag only will be deployed c.Providing the drivers seat is forward of a pre-determined position, the time delay between the first and second stage of the drivers airbag being deployed will be increased d.Providing the drivers seat is forward of a pre-determined position, the drivers airbag will not be deployed (G420668) Technical Training282 Test questionsLesson 3 – Body and Paint