LG Ld 2293thb Owners Manual

 
DISHWASHER
Please read this manual carefully before operating your 
dishwasher. Retain it for future reference.
OWNERS MANUAL
MODEL : LD-2293THB
P/No.: MFL30149767
 

ONTENTSC
SAFETY AND CAUTION 3
INSTALLATION INSTRUCTIONS 5
PARTS NAME 9
FUNCTION OF CONTROL BUTTON 10
BEFORE USING FOR THE FIRST TIME 12
HOW TO USE AND OPERATE 14
OPERATING SEQUENCE 19
PROGRAM 20
USER MAINTENANCE INSTRUCTIONS 21
TROUBLE SHOOTING GUIDE 22
SPECIFICATION 
 

3
AFETY AND CAUTIONS
• Please read this manual carefully before using
the dishwasher for the first time.
• This manual contains very important notes
regarding the installation, use and maintenance
of your dishwasher.
• The manufacturer can not be responsible for
problems caused by ignoring these safety and
caution instructions.
• This dishwasher is designed for normal
household use.
• Do not use the dishwasher for industrial and
commercial use, or other purpose.
• The appliance is not intended for use by...

AFETY AND CAUTIONS
4
GROUNDING INSTRUCTIONS
This appliance must be grounded. In the event of a malfunction or breakdown, grounding
will reduce the risk of electric shock by providing a path of least resistance for electric
current. This appliance is equipped with a cord having an equipment-grounding conductor
and a grounding plug. The plug must be plugged into an appropriate outlet that is installed
and grounded in accordance with all local codes and ordinances.
WARNING - Improper connection of the...

5
NSTALLATION INSTRUCTIONSI
Unit:mm
Step 1 : 
PREPARE CUPBOARD OPENINGStep 2 : 
PREPARATION FOR ELECTICAL WIRING
1
2
3
This appliance must be supplied with
correct rating voltage and hertz as shown
on instruction manual, and connected to
an individual, properly earthed branch
circuit, protected by a minimum 15 amp
circuit breaker or time delay fuse.
Wiring must be 2 wire with Earth.
The power plug must be in a accessible
location adjacent to and not behind the
dishwasher and within 1.2 meters of the...

NSTALLATION INSTRUCTIONSI
6
Step 3 : 
PREPARING THE DISHWASHER
FOR INSTALLATION
1
2
Lay the dishwasher on its back.
Adjust the legs to the required height
as shown in below figure.
Step 4 : 
INSTALLING THE
DISHWASHER IN CUPBOARD
1
2
Before sliding the dishwasher into the
cupboard opening, all necessary height
and balancing adjustments should be
made using a spanner.
Slide the dishwasher into the cabinet
opening carefully. Make sure that the
drain hose inside the cabinet is not
kinked or stretched.
3Snap...

7
NSTALLATION INSTRUCTIONSI
Step 5 : 
DRAIN LINE CONNECTION
1
2
3
If the end of drain hose does not fit to
the drain line, use a rubber
connector(not supplied) that is
resistant to heat and detergent.
This should be available from a
plumbing shop or DIY merchants.
There are two typical connections as
shown in Figure A, B.
The “S” trap spigot must be drilled out
cleanly and free of obstruction to its
maximum internal diameter, if used for
drainage.
To prevent siphoning, one of the following
methods must...

NSTALLATION INSTRUCTIONSI
8
Step 6 : 
WATER SUPPLY CONNECTION
1
2
Connect the water supply hose to the
water tap as shown.(Some models
consist of an inlet valve and hose.)
This dishwasher may be fed with either
hot or cold water. If the water can not be
maintained below 65ºC, the dishwasher
must be connected to cold water.
When connecting, the sealant tape or
sealing compound to avoid water leaks.
Make sure that the line is not kinked or
sharply bent.
Water tap
Water supply
hose
Step 7 : 
FINAL CHECK AND...

9
ARTS NAMEP
1. Control Panel
2. Front Cover
3. Power Button
4. Drain Hose
5. Inlet Hose
6. Power Cord
7. Adjustable Leg
8. Upper Rack
9. Cutlery Rack10. Detergent And Rinse Aid Dispenser
11. Vapor Vent Cover
12. Upper Spray Arm
13. Lower Spray Arm
14. Filter ASM
15. Lower Rack
16. Salt Container Cap
17. UV Lamp (not visible)
The appearance and specifications may vary without notice.
Funnel
 

UNCTION OF CONTROL BUTTONF
10
Program
Program
• When you want to select program, press this button.
Spray
• With each press, the level of water jet is changed to Strong, Mediumand Soft in a sequence.
Indicator
Time Left
• Before starting, the display window shows the running time of the selected program.
• After starting, the display window shows the remaining time.
• If the dishwasher has a trouble,  the trouble type is displayed.
“OE”, “FE”, “IE”, “EI”, “HE”, “CE”, “LE”, “tE”
• If this error letters...