Home > Mitel > Communications System > Mitel SX-200 DIGITAL Pabx Engineering Information Manual

Mitel SX-200 DIGITAL Pabx Engineering Information Manual

Here you can view all the pages of manual Mitel SX-200 DIGITAL Pabx Engineering Information Manual. The Mitel manuals for Communications System are available online for free. You can easily download all the documents as PDF.

Page 61

Engineering Information 
TX PADS 
CIRC 
TIP CONNECTING 
SWITCHING 
NETWORK 
Rx PADS 
8230ROEC 
Figure 12-4 Analog Pad Arrangements - Configuration A 
Page 12-g  

Page 62

Engineering Information 
2 
!=t 
-----__--_- 
SZZSROEO 
Figure 12-5 Analog Pad Arrangements - Configuration B 
Page 12-10  

Page 63

Engineering Information 
VARIABLE 
CIRCU R TO 
T/R TING 
9259ROEI 
Figure 12-6 Local Switching Analog Pad Arrangements 
Page 12-11  

Page 64

Engineering Information 
TABLE 12-2 
SX-200@ DIGITAL PABX LOCAL SWiTCHlNG LOSS PLAN 
ATO * 
* The AT0 trunk cannot be locally switched. The AT0 trunk can be 
implemented with an analog CO trunk interface, but it does not have 
the 2 dB pad required to meet part of the loss plan for local switching. 
412.96 All analog interfaces may be represented by the block diagram 
Figure 12-6 when they are locally switched. 
Confereneing Loss Plan 
12.17 Any SX-2QO@ DIGITAL PABX will have at least one 18 port...

Page 65

Engineering Information 
Originating 
Circuit 
ONS(D) 
ONS(A) Connecting Loss (dB) Loss (dB) 
Circuit TX Direction Rx Direction 
ONS(D) -6.0 -6.0 
ONS(A) -6.2 -6.2 
OPSS 6.0 -6.0 
OPSL -3.0 -3.0 
ACO(D) -4.0 -4.0 
ACO(A) -3.2 -3.2 
A-WA) -5.2 -5.2 
AJ’-W) -5.0 -5.0 
AKO(A) -6.2 -6.2 
A-l-O(D) -6.0 -6.0 
SA-iT -3.0 -3.0 
ONS(D) -6.2 -6.2 
ONS(A) -6.4 -6.4 
OPSS -6.2 -6.2 
OPSL -3.2 -3.2 
ACO(D) -4.2 -4.2 
ACO(A) -3.4 -3.4 
AJ’-W) -5.4 -5.4 
AJ-UD) -5.2 -5.2 
ATO -6.4 -6.4 
ATO -6.2 -5.2 
sATT -3.2 -3.2...

Page 66

Engineering Information 
TABLE 12-3 (CONT’D) 
CONFERENCING LOSS PLAN 
TX Direction 
Page 12-14  

Page 67

Engineering Information 
TABLE 12-3 (CONT’D) 
CONFERENCING LOSS PLAN 
Originating 
Circuit 
ATO 
ATO 
sA-lT Connecting Loss (dB) Loss (dB) 
Circuit TX Direction Rx Direction 
ONS(D) -6.2 -6.2 
ONS(A) -6.4 -6.4 
OPSS -6.2 -6.2 
OPSL -3.2 -3.2 
ACO(D) -4.2 -4.2 
ACO(A) -3.4 -3.4 
AJ-W) -5.4 -5.4 
AJ’-W -5.2 -5.2 
ATO -6.4 -6.4 
ATO -6.2 -6.2 
sATT -3.2 -3.2 
ONS(D) -6.0 -6.0 
ONS(A) -6.2 -6.2 
OPSS -6.0 -6.0 
OPSL -3.0 -3.0 
ACO(D) -4.0 -4.0 
ACO(A) -3.2 -3.2 
AT-W) -5.2 -5.2 
AT-W) -5.0 -5.0 
ATO -6.2...

Page 68

Engineering Information 
TABLE 12-4 
SX-200@ NORTH AMERICAN CALL PROGRESS TONES 
Transfer dial tone 3 x (0.1 s on, 0.1 s 
off), followed by 
Reorder 
Busy 
Ringback 
Special ringback 
Camp-on 
Executive override 0.25 s on, 0.25 s on 
0.5 s on, 0.5 s off 
1 s on, 3 s off 
0.4 s on, 0.2 s off, 
0.4 s on, 3 s off. 
-17.0 to -20.0 -14.0 to -20.0 
-17.0 to -20.0 -14.0 to -20.0 0.8 s on, (6 s off, 
0.2 s on) repeated. 
Page 12-16  

Page 69

Engineering information 
TABLE 12-5 
CALL PROGRESS TONE INTERFACE LEVELS 
Camp-on / 
Executive 
Override ONS(D) -20.0 
ONS(A) -19.2 to -20.2 
OPSS -20.0 
OPSL -17.0 to -19.0 
ACO(D) -14.0 to -20.0 
ACO(A) -14.2 to -20.2 
ATA) -17.2 to -20.2 
A-W3 -17.0 to -20.0 
ATO -17.2 to -20.2 
ATO -17.0 to -20.0 
sA=l-l- -17.0 to -19.0 
Page 12-n  

Page 70

Engineering information 
TABLE 12-6 
DTMF LEVELS - TRUNK INTERFACE INTO 600 OHMS 
Nominal level - single frequency -4.0 dBm 
Nominal level - frequency pair -1.0 dBm 
Nominal twist 0.0 dBm 
TABLE 12-7 
DTMF TONE INTERFACE LEVELS 
Interface Interface 
Level 
Wm) 
ONS(D) 
ONS(A) 
OPSS 
OPSL 
ACO( D) 
ACO(A) 
AT-W) 
AT-W) 
ATO 
ATO 
SAT-K 
n/a 
n/a 
n/a 
n/a 
-1.0 
-1.2 
-1.2 
-1.0 
-1.2 
-1.0 
-1.0 
Page 12-18/18  
Start reading Mitel SX-200 DIGITAL Pabx Engineering Information Manual

Related Manuals for Mitel SX-200 DIGITAL Pabx Engineering Information Manual

All Mitel manuals