Mitel SX 200 DIGITAL Pabx Shipping, Receiving, And Installation Information Manual

Shipping, Receiving, and Installation Information
2. CONFIGURATIONGeneral
2.01The SX-200 DIGITAL PABX configuration rules are contained in
Section 
MITLSI 09-094-I 80-NA, Engineering information; refer
to it for details about how an 
SX-299 DIGITAL PABX is to be con-
figured. This Section describes the physical installation of the PABX,
after the system has been configured.
2.02The SX-200 DIGITAL PABX 
480-port is configured in either one
or two cabinets. In the Control cabinet, the Control shelf has
Bay...

SECTION MITL91 g9-094-200-NAWelded Control Cabinet
2.07The SX-200 DIGITAL PABX Welded Control cabinet consists of a
metal frame enclosed by back, top, and side panels. The digitalControl shelf in the lower position has two Bays; Bay 1 is on the left,
and Bay 2 on the right. Access to the Bays is through the front door ofthe cabinet. The rear panel allows access to line, trunk, and 
Inter-
cabinet PCM Cable entries. Figure 2-l shows an SX-200 DIGITAL, PABX
Welded Control Cabinet; it can include only an...

Shipping, Receiving, and installation InformationBAY 3
/ MAINTENANCE PANEL
PERIPHERAL SHELF
/CONTROL SHELF
a lllllI I/1;; IIII I IIi-1 FAN ASTEMBLY
BAY 1BAY 2
PERIPHERAL
SHELFFigure 2-l SX-200 DIGITAL PABX Welded Control Cabinet
Page 5 

SECTION MITL9109-094-200-NABAY 3 POWER SWITCH
/
kd-BAY 2
LICONTROL SHELF
I///PERIPHERAL SHELF
(BAY 
3)/MAINTENANCE PANEL
PERIPHEftALSHELF
POWEi SUPPLY
KAO527EORCFigure 2-2 SX-200 Universal Control Cabinet
Page 6 

Shipping, Receiving, and Installation Information
PERIPHERAL SHELFIBAV 4
BAV 3
IF------l
EAV 1BAV 2
CONTROL SHELFMAINTENANCE PANEL
FANS
/0
.-
0
II
n
s
cl
I
0
0
m
c.90.
30
Il.& \ \ \
QBQ
iAC FILTER
POWERDISTRIBUTION
KAOSZBEOROFigure 2-3 Universal Control Cabinet with Digital Peripheral Shelf
Page 7 

SECTION MITL9109-094-200-NAMAINTENANCE
PANEL,
BAV 5 
\BAV 4-5
PCM 
\CABLEBAV 
4.BAV 24
PCM 
-CABLE
RESERVEPOWER --
SUPPLV
(OPTIONAL)W
--
L,
‘
‘1
‘-‘
‘*
L
-5
1- II
BAV 
4-CABLE 
--‘----CLAMPBAV 5
/SUPPLV
KAOlB9ElRFigure 2-4 SX-200 DIGITAL PABX Peripheral Cabinet
Page 8 

Shipping, Receiving, and installation Information
PERIPHERAL SHELF
BAV 3BAV 2
rim
/MAINTENANCE
PANEL
I&iEriJBAV 0
IICONTROL SHELFBAV 2BAV 3
r----InuuAC 
FiiTERBAV 1BAV 0
KA0675EOROFigure 2-5 SX-200 672 port DIGITAL PABX Control Cabinet
Page 9 

SECTION MITLSI 09-094-200-NAPERIPHERAL SHELF
IBAV 7
BAV 6
II-----lBAV 6BAV 7
uuBAV 5BAV 4
IIPERIPHERAL SHELF
uu
\AC FILTER
BAV 4BAV 5
Figure 2-6 SX-200 672 port DIGITAL PABX Peripheral Cabinet
Page 10 

Shipping, Receiving, and Installation Information
672-Port Peripheral Cabinet2.11The 672-Port Peripheral cabinet (shown in Figure 2-6) contains
one or two digital shelves (with one or two digital bays each). It
is similar to the Control Cabinet except for having no Control Bay (Bay
0); it can be configured with one, two, three, or four digital peripheral
bays.Printed Circuit Cards
2.12All printed circuit cards are packed separately and .sent in ship-
ping cartons, usually five or 10 to a carton.CAUTION:...

SECTION MITL9109-094-200-NA
\DECRVPTIONMODULE
7736EORClFigure 2-7 Main Control Card and Decryption Module
Page 12