Mitel SX 200 DIGITAL Pabx Shipping, Receiving, And Installation Information Manual

Customer Data Entry (CDE)
5. PROGRAMMING ERROR MESSAGES
TABLE 5-l
PROGRAMMING ERROR MESSAGES
Error Message
XXXXX is an ACD agent IDMean i ngA Supervisor’with ACD ID XXXXX, cannot be
displayed, as requested via the FIND SUPER
key, because this ID belongs to an agent, not
a supervisor.
XXXXX is an ACD supervisorThe ID entered for the FIND ID key belongs to
a senior supervisor or supervisor.
XXXXX already has day zone XThe selected day already has a day zone
specifiedspecification. Only one day zone can be...

SECTION MITL9109-094-210-NATABLE 5-1 (CONT’D)
CodePROGRAMMING ERROR MESSAGES
Error MessageMeaning
Assignments. Select a new code or change the
LDN assignment.
Access Code XXXXX conflictsThe code entered has already been defined as
with a Console Access Code
an extension number for a console in Form 07,
Console Assignments. Select a new code or
change the console extension number.
4ccess Code XXXXX conf I ictsThe code entered has already been defined asrvith the Feature Access Codea Feature Access Code....

Customer Data Entry (CDE)
TABLE 5-l (CONT’D)
PROGRAMMING ERROR MESSAGES
Error MessageMean i ngCall Rerouting Table are invalid. Assign new
codes in the fields.
‘he access codes for fieldsThe extension numbers, Hunt Group Access
W, XXX & XXX are invalidCodes, Night Bell extension numbers or
Attendant Console directory numbers assigned
to the DAY, 
Nl and N2 fields in Form 19, Call
Rerouting Table are invalid. Assign new codes
in the fields.
ecess code XXXXX is not aralid answer pointThe following are...

SECTION MITL9109-094-210-NATABLE 5-l (CONT’D)
PROGRAMMING ERROR MESSAGES
Error Message
Mean i ngAgent Group XX has no membersThe selected Primary ACD Agent Group or
Overflow Agent Group is empty. It must have
members before it can be put in this form.
Alternate music sources cannotMusic sources cannot be line appearances.
have 
keyline or multi-call line
appearances .
Attempting to add more thanThere are a maximum of 50 members for each
KXX members to this groupPickup Group, Trunk Group and Hunt Group,...

Customer Data Entry (CDE)
TABLE 5-l (CONT’D)
PROGRAMMING ERROR MESSAGES
Error MessageMeaning
Attempting update/delete of aThe selected device is being used; modifydev i cethis device at a later time.
that is currently in use
Bay/Slot/Circuit XX/XX/XX isThe specified bay/slot/circuit is assigned
already assignedelsewhere. Select a new bay/slot/circuit
number or change the assignment of that
bay/slot/circuit number. Refer to Form 01,
System Configuration and Form 09, Station/
SUPERSET Telephones....

SECTION MITL9109-094-210-NATABLE 5-1 (CONT’D)
PROGRAMMING ERROR MESSAGES
Error MessageMeaning
The Bay/Slot/Circuit 
-The selected bay/slot/circuit is programned#/XX/XX is not programned as a as a Dial-In Trunk. Refer to Form 15, Dial-InW&DIAL-IN trunkTrunks.
The Bay/Slot/Circuit 
-Relays (Subcircuits 5 and 6) are located on
XX/XX/XX is not programned as a the Receiver/Relay Module only. Ensure that
RECE I VER MCIDULEthere is a Receiver/Relay Module on a
Universal Card at that location in Form 01,
System...

Customer Data Entry (CDE)
TABLE 5-1 (CONT’D)PROGRAMMING ERROR MESSAGES
This console has 
LLN assigned- cannot delete
Consoles that share an LDN
access code must be in the same
TENANT GROUP
CGR group out of range. Valid
range is (1 - 50)CCJR value is out of range.
ICDS number must be 1 to 50
r- ~~~~
CDS value is out of range.
Database is out of sync.
r 
~~~
IDelete 
ACD Group XX from ACD
PATH W before deleting last
agent
Delete 
ACD Group XX from ACD
SUPERVISORS form before
rdeleting last agent
Disk I/O...

TABLE 5-1 (CONT’D)
PROGRAMMING ERROR MESSAGES
Error MessageMean i ngDisk is write-protected 
- dataRemove the write-protect tag from the disk.
was not written to diskRe-insert the disk in the disk drive and
activate the write process 
agE.in.Entered string is not in theIn Form 26, ARS Nested Digit String, the
systemselected digit string is not defined.
Error in 
“*” sequences. *The asterisk sequence in the DIGITS TO BE(1,2,3,4,5,*) are the onlyINSERTED field in Form 22, ARS: Modified Digit
valid...

Customer Data Entry (CDE)
TABLE 5-1 (CONT’D)
PROGRAMMING ERROR MESSAGES
Error MessageMean i ngOptions/System Timers.
Form number XX cannot be
accessedThe selected form number is 
rese-ved for
future use or the selected form number has
restricted user access. Refer to Form 28, Forn
Access Restriction Definition for the level of
access for each form.
Form number out of rangeThe selected Form number is invalid. The
range is 1 to 44 with Form 37 reserved for
future use. Refer to Table 4-2 Available
Forms....

SECTION MITL9109-094-210-NATABLE 5-1 (CONT’D)
PROGRAMMING ERROR MESSAGES
Error Message
Modified digit table 
t:ntriesare from 1 to 50
Must delete all appearances of
XXX from CALL REROUTING TABLE
Must delete all appearances of
from CALL 
RERDUTING TABLE
Must delete all appearances of
XXX in NON-DIAL-IN trunks
Must delete al I key
definitions
before deleting set
Must delete appearances of
XXXXX from answer points in
NW-DIAL-IN 
TRUVKSMust delete the appearances of
XXXKX on all sets before
deleting set
Must...