Mitel Sx 200 El/ml Technicians Handbook

Maintenance Commands
241
Maintenance
Commands 
  9-EM  
  0-MORE_KEYS 
   1-COV
   2-LINK/CHANNEL
   3-DID
   4-OPS
   6-DNIC
   9-T1_TRUNK
  3-EXT-NUM 
7-DISABLE-DIAG2-POWER-UP1-BAY/SLOT/CCT  
 2-DEVICE_TYPE1-ONS 
   2-LS/GS-TRUNK 
  3-RECEIVERS  
  4-JUNCTOR  
  7-CONSOLE
  9-EM
  0-MORE_KEYS
   1-COV
   2-LINK/CHANNEL
   3-DID
   4-OPS
   6-DNIC
   9-T1_TRUNK
  3-EXT-NUM 
 8-RET-TO-SVC1-BAY/SLOT/CCT  
2-DEVICE_TYPE 2-LINK/CHANNEL 
4-JUNCTOR
 3-EXT-NUM 
9-DISC_TRUNK1-BAY/SLOT/CCT
Table 57:  Diagnostic...

Technician’s Handbook
242
Traffic Measurement Commands
Table 58:  Traffic Measurement Level Functions
COMMANDPARAMETERQUALIFIER
1-SET 1-UNITS 1-CCS 
2-ERLANGS
 2-PERIOD 
 3-DURATION  
 4-AUTOPRINT 1-ON
2-OFF
 5-CANCEL  
7-START_TIME
 8-CONDENSED 1-ON
2-OFF
2-SHOW 3-STATUS 
3-PRINT 
4-READ 
6-QUIT
4-DELETE  
9-STOP1-TRAFFIC _RPT 
3-PRINT 

Index
243
A
Alarm
check 26
flowchart 50
ANI/DNIS incoming 122
Attendant console 103
B
Backup
database 27
log entries 56
Basic maintenance commands 
231
Boot code 33
BRI installation 198
C
Cabling, peripheral interface 196
Call Forwarding - External 135
Card configuration, display 232
CFCII card 5
Changing options 35
Channel associated signaling 82
Circuit cards, replacing 60
CLASS trunks 126
Command sequences 231
Common channel signaling 82
Configuration
336 port 18
456 port 19
480 port 20
672 port 17
EL...

Technician’s Handbook
244
E
E&M Trunk
card settings 191
Type I 77
Type V 79
E.8 error 35
EL 5
ELx cabinet 6
Enabling options 35
Entering command sequences 
231
Error codes, MCC power-up 183
F
Faults
alarms, investigate 50
identifying 47
maintenance terminal 53
set / dataset 51
system not booting 49
Feature Limitations 154
FIM Carrier troubleshooting 67
FIM II 178
Firmware
commands 33
download failure 34
revision levels 33
system logs 34
upgrading 33
Flash Memory
Upgrading in 
SX-200 IP Node
 38...

Index
245
N
Non-dial-in trunk 116
O
Options and timers, system 147
Options password 35
Options, changing or enabling 35
P
PBX - PMS interface 131
PBX and PMS cannot 
communicate
 89
Peripheral
cabinet, add 185
interface cabling 196
interface cards 186
interface cards, replacing 60
Pinouts for SX-200 SPINE 202
PMS
5-digit extension number 87
message - PBX to PMS 87
messages 86
programming interface 131
Pointer, meaning of 3
Power cards (EL)
high 10
low 10
PRI card
programming 112
rules 177
S1 Switch...

Technician’s Handbook
246
672 Port 17
EL/ML configuration rules 173
ELx cabinet 6
LIGHT 13
ML (FD) and (RM) 12
SPINE Bay 16
SX-200 IP Node
Configuration 14
Troubleshooting 93
Upgrading 36
SX-200 RM peripheral interface 
card slot assignments
 197
Symbols 3
System
checklist 25
commands 234
correcting ID errors 57
ID mismatch 57
initialization sequence 181
is not booting 49
options and timers 147
T
T1 or PRI Trunk 
port (J5 and J6)
 201
T1 Trunk
A&B bits 83
A-B signalling states 84
loopback 83
maximum...

Index
247
Trunks
ANI/DNIS 122
CLASS 126
Dial-In 119
DISA 121
Non-Dial-In 116
U
Upgrading set firmware 33
USOC connector pin 
designations
 213
V
Voice stations 108
W
Wrist strap 60 

Technician’s Handbook
248 

E-Doc Tips
Advanced Graphical User Interface Example
How do I print a procedure from the infobase?
1. In the Table of Contents, select the check box of the section that you 
want to print.
2. On the File menu, click Print.
3. Click the Print Document tab.
4. Click Section.
CAUTION:Do not click all or you will print the entire infobase.
5. Click OK.
How do I export a section of the infobase to a word 
processing file?
1. In the Table of Contents, select the check box of the section that you 
want to...

E-Doc Tips
How do I get more information?
The documentation CD-ROM contains all of the technical information in an 
electronic file called an infobase. Folio Views, the infobase viewer, has 
powerful search capabilities that let you find information quickly and easily. 
Once youve found the information that you need, you can read it online, print 
sections, or export segments to word processing files.
How do I search the entire infobase?
1. Click Advanced Query
2. In the Query For box, type your search...