NEC Neax 2400 Ipx Isdn Feature Programming Manual

NDA-24305 CHAPTER 5
Page 43
Revision 1.0
CALL FORWARDING-ALL CALLS-Dterm-PRI
To cancel CALL FORWARDING-ALL CALLS-Dterm-PRI from My-line:
1. Lift the handset or press the “SPEAKER” key; receive Dial Tone.
2. Press the CALL FORWARDING-ALL CALLS-D
term-PRI feature key; receive Service Set Tone.
The LED of the associated feature key will go out. The LCD displays:
3. Replace the handset or press the “SPEAKER” key.
To set CALL FORWARDING-ALL CALLS-D
term-PRI for multi-line appearance other than the My-line:
1....

CHAPTER 5 NDA-24305
Pag e 4 4
Revision 1.0
CALL FORWARDING-ALL CALLS-Dterm-PRI
To cancel CALL FORWARDING-ALL CALLS-Dterm-PRI for a multi-line appearance other than the My-line:
1. Lift the handset or press the “SPEAKER” key; receive Dial Tone.
2. Press the multi-line appearance; receive Dial Tone. Then press the CALL FORWARDING-ALL CALLS-
D
term-PRI feature key; receive Service Set Tone. The LCD displays:
The associated LED that is lit at another station goes out.
3. Replace the handset or press the...

NDA-24305 CHAPTER 5
Page 45
Revision 1.0
CALL FORWARDING-BUSY LINE-PRI
C-96 CALL FORWARDING-BUSY LINE-PRI
1. General Description
This feature permits a call to a busy station to be immediately forwarded to a predesignated station or to the
ATTENDANT CONSOLE [A-3].
If a called station is in a hunt  group and forwards calls to another hunt group,  it  can be determined by system
data, whether the calling party is directed to the called parties hunt group or the terminating parties hunt group
when all of...

CHAPTER 5 NDA-24305
Pag e 4 6
Revision 1.0
CALL FORWARDING-BUSY LINE-PRI
STEP 3: ASPA - Assign an access code to CALL FORWARDING-BUSY LINE Entry, SID=10 and to
CALL FORWARDING-BUSY LINE Cancel, SID=11. Assign Connection Status Index
(CI) for Normal service.
STEP 4: ASFC - Assign the stations to receive CALL FORWARDING-BUSY LINE a Service Feature
Class that allows SFI=9.
STEP 5: AKYD - For D
term sets, CALL FORWARDING-BUSY LINE may be assigned to a programmable
line/feature key. Assign KYI=1 and FKY=1....

NDA-24305 CHAPTER 5
Page 47
Revision 1.0
CALL PICKUP-GROUP-PRI
C-97 CALL PICKUP-GROUP-PRI
1. General Description
This feature permits a station user to answer ISDN Network calls directed to other lines in a preset CALL
PICKUP-GROUP simply by dialing a pickup code.
2. Operating Procedure
Picking up an incoming ISDN call:
1. A call from the ISDN network terminates to a trunk.
2. Stations within the same CALL PICKUP-GROUP-PRI ring.
3. Lifts the handset; receives Dial Tone.
4. Dials the call pickup code; the...

CHAPTER 5 NDA-24305
Pag e 4 8
Revision 1.0
CALL PICKUP-GROUP-Dterm-PRI
C-9 7D   CALL  PIC KU P-G RO UP-Dte rm-P RI
1. General Description  This feature permits a station user to answer an ISDN network call directed to another line in a preset CALL
PICKUP-GROUP by using a programmable line/feature key.
CALL PICKUP-GROUP-D
term-PRI may be used by seizing Dial Tone from any multi-line appearance on the
Dterm.
2. Operating Procedure Picking up an incoming call:
1. An incoming call from the ISDN network...

NDA-24305 CHAPTER 5
Page 49
Revision 1.0
CALL TRANSFER-ATTENDANT-PRI
C-98 CALL TRANSFER-ATTENDANT-PRI
1. General Description 
This feature permits a station user, while connected to an ISDN network call, to signal the Attendant and have
the Attendant transfer the call to another station within the system.
2. Operating Procedure
Calling the Attendant:
1. While engaged in a PRI trunk call, press the switchhook; receive Special Dial Tone.
2. Dial the operator/access code.
3. a. ATTENDANT CONSOLE [A-3] “RCL”...

CHAPTER 5 NDA-24305
Pag e 5 0
Revision 1.0
CALL TRANSFER-ALL CALLS-PRI
C-99 CALL TRANSFER-ALL CALLS-PRI
1. General Description 
This feature permits a station user to transfer incoming or outgoing ISDN calls to another station within the
system without Attendant assistance.
2. Operating Procedure
To transfer a call in progress:
1. While connected with the first party; press the switchhook; receive Special Dial Tone.
2. Dial the third party; receive Ringback Tone.
3. At this point, the station user can...

NDA-24305 CHAPTER 5
Page 51
Revision 1.0
CALL TRANSFER-ALL CALLS-Dterm-PRI
C-99D CALL TRANSFER-ALL CALLS-Dterm-PRI
1. General Description 
This feature permits a station user to transfer incoming or outgoing ISDN calls without Attendant assistance.
2. Operating Procedure
To transfer a call in progress:
1. While connected with the first party, press the “TRANSFER” key; receive Special Dial Tone.
2. Dial the third party; receive Ringback Tone.
3. At this point, the station user can either wait and announce...

CHAPTER 5 NDA-24305
Pag e 5 2
Revision 1.0
CONSULTATION HOLD-ALL CALLS-PRI
C-100 CONSULTATION HOLD-ALL CALLS-PRI
1. General Description 
This feature permits a station user to hold any incoming or outgoing  ISDN network call or any intraoffice call
while originating a call to another station within the system.
2. Operating Procedure
To hold the original call and place the second call:
1. Press the switchhook; receive Special Dial Tone.
2. The original call is held.
3. Dial the second station number;...