Oce ColorWave 600 User Manual

Illustration
Action Press the lower left softkey to toggle between the first
language and the second language.
Note:
Only the first language (default language) and
the second language (alternative language) de-
fined in the Océ Express WebTools are 
avail-
able on the Printer operator panel. 3
Chapter 4
 - Configure the printing system 131Change the display language of the printer
Downloaded From ManualsPrinter.com Manuals 

Configure the network settings on the printer operator panel
When to do
When you have no connection to the Océ ColorWave 600 printer you cannot use the
Océ 
Express WebTools to edit the network settings. This situation can occur at first in-
stallation 
or when there is no network connection due to invalid network settings.
Before you begin If you integrate the printer according to a network policy, contact your network admin-
istrator to get information about the network infrastructure 
and parameters....

Illustration
Action Use the scroll wheel to select 'Network settings' and
press the
 confirmation key.
3 The printer operator panel displays the current network
settings. To change these settings press 'begin' - lower
right softkey - to start 
the network connection proce-
dure.
4 The 
following message is displayed:
'This 
wizard assists you to connect the printer to the
network'.
Use
 
the 'Upper right softkey' to go to the next step. 5
Chapter 4
 - Configure the...

Illustration
Action Select one of the following options.
• 'Auto detect
 (IPv4 only)'
Use

 
the 'Scroll wheel' to select 'Auto detect (IPv4
only)' 
if the system must automatically detect your
network 
settings. Confirm your entry with the
'Confirmation
 
key' above the 'Scroll wheel'.
Use
 the 'Upper right softkey' to go to next step and
continue with step 9.
• 'Manual'
Use 

the 'Scroll wheel' to select 'Manual' if you want
to...

Illustration
Action When you are ready and have left the wizard, the sys-
tem indicates
 if you 
have to restart the controller of
the 
Océ ColorWave 600 printer to apply the new net-
work 

settings. This can, for example, be the case when
settings are received through DHCP. When no indica-
tion appears, you do not need to restart the controller. 9
Chapter 4
 - Configure the printing system 135Configure the network settings on the printer operator panel
Downloaded From ManualsPrinter.com Manuals 

Configure print jobs
Relevant settings in the Océ Express WebTools
Set the default print job settings
Definition
You can use the Océ Express WebTools to configure the default values for the print job
settings. 
The print job settings are grouped under the 'Preferences' - 'Print job defaults'.
You can find 
a short explanation of the most important print job defaults below.
When you
 
define print job settings in the printer drivers or the job submission tools,
these values
 always...

'Preferences' - 'Print job defaults' - 'Basic'
#
Description
Setting
Enter the default value for the number of times you want
your 
jobs to be printed.
'Number of
 sets'
•Select 

'On (sort by set)' if your printed output must be
sorted by set (123 - 123).
• Select 'Off

 (sort 
by page)' if your printed output must
be sorted
 by page (11 - 22 
- 33).
'Collate'
•Select 'Top
 delivery tray' if your 
printed output must
default be
 delivered...

#
Description
Setting
The 'Media source' setting can be used to select the default
output material and format. The 'System' screen of the
printer 
operator panel will show you what rolls are currently
loaded.
You can select 
'Automatic' or you can select a specific roll
number 
that the Océ ColorWave 600 must use by default.
'Media source'
If you
 
select 'Media source': 'Automatic' you can also set
the 'Media selection policy' setting.
When

 you...

#
Description
Setting
'Scales the image with a defined percentage or automatically
to the media size.' (100% is no scaling)
'Scale'
'Rotates 
the image counterclockwise. Select one of the 'auto
rotate' modes to 
print faster due to less media transport.
Select 'auto
 rotate media saving' to use 
the media in the
most
 
efficient way.'.
(see 
‘Set the 'Rotation' mode’  
on page 330)
'Rotation'
'Aligns
 
the image on the media.'
(see 
‘Set the...

Set the Color management settings
Introduction
In most cases, you define the color management settings for a print job during the job
submission 
process. You can select the color management settings in your print job sub-
mission application (Océ Windows ®
 printer driver, Océ Publisher Pro or Océ Publisher
Select) and if the Océ Job Ticket is enabled, these settings will overrule the default settings
that you defined in the Océ Express WebTools. If a file is sent to the printer without any
color...