Oce ColorWave 600 User Manual

6.
Once logged in, enter the printer 'Host name' (for example: OceColorWave600) in the
'Identification'
 window, in order to address the Océ ColorWave 600 by its 'Host name'.
You can

 
define the other settings if needed. Restart is required. 7.
Turn 
the printer off and on to restart the Océ ColorWave 600 printing system.
8. Wait until
 the system is ready again.
9. Enter the

 following address: 'http://' (for example
http://OceColorWave600)
 in the workstation web...

Refer to the Océ TDS/TCS Connectivity Manual, 'Chapter 2 - Windows TCP/IP envi-
ronment' to
 find 
technical information about the Océ ColorWave 600 integration in a
network 
environment. Chapter 3
 - Prepare the printing system for use and get started82Complete the printer configuration in the Océ Express WebTools
Downloaded From ManualsPrinter.com Manuals 

Configure the regional settings of the Océ ColorWave 600
Purpose
The regional settings are configured during the installation of your Océ ColorWave 600.
If you want to change the initial configuration, you can do so in the 'Regional settings'.
Define
 the regional settings for the printer in the following order.
• 'First 
language' and 'Second language' of the printer operator panel
• 'Measurement unit'
• 'Time 
zone'
If you change the 'Time zone' 
you must...

Print the Customer Analysis Tool (CAT) demo print
When to do
When you have installed the printer and prepared the printer for use, you can print the
Customer 
Analysis Tool demo print. You can use this demo print to check if the Océ
ColorWave 600 
works correctly.
How 
to print the Customer Analysis Tool (CAT) demo print #
Illustration
Action From the 'Home' screen on the printer operator panel
select 
the 'System' tab.
1 Select the 'Maintenance' tab with the upper left softkey.
2...

Illustration
Action Use the 'Scroll wheel' to select 'Customer Analysis
Tool'.
4 Press 'Finish' to 
print the 'Customer Analysis Tool'
demo print.
5 Select 'Back' and 'Home' to return to the 'Home'
screen.
6
Result Evaluate 

the 'Customer Analysis Tool' demo print. Check if the print does not show any
of the following output quality problems:
• ‘Banding 
across the print with differences in color and gloss’  on page 375
• ‘Horizontal, wavy...

Chapter 3 - Prepare the printing system for use and get started86Print the Customer Analysis Tool (CAT) demo print
Downloaded From ManualsPrinter.com Manuals 

Chapter 4
Configure 
the printing
system
Downloaded From ManualsPrinter.com Manuals 

Introduction to the Océ Express
WebTools
Purpose of the Océ Express WebTools
Definition
The Océ Express WebTools is an application that runs embedded on the Océ ColorWave
600.
This application gives you access to the settings to manage the configuration and prefer-
ences of the Océ ColorWave 600. To change settings in the Océ Express WebTools you
must log
 in using one of three predefined user roles because the settings are all password
protected. (see 
‘User roles and authorizations’  on page 110)...

When you access the 'Jobs' tab you can see 3 different sections.
• The 
Océ Publisher Express section.
To submit
 a new job click 'Create new job'. A new window opens, where you can
define

 some basic job settings and where you can browse to the file you want to print.
• The 
'Jobs - Queue' section.
This
 
section gives an overview of the jobs in the queue, waiting to be printed. The
buttons on
 top of the 'Jobs - Queue' section allow you 
to move a selected job to the...

The 'Configuration' tab contains the settings to install the system in your infrastructure,
according to your standards. These settings are configured during installation and do not
need frequent adjustment.
#
Groups
Tab
•'Overview'
Summary of the settings organised in different groups.
• 'Connectivity'
• 'Printer setup'
'Configuration'
'Support' 

tab
Editable for System administrator and Power user. (see  ‘User roles and authorizations’ on
page 110 )...