Oce ColorWave 600 User Manual

The printer operator panel
The hardware of the Printer operator panel
Illustration
Component - function table
#
Description / Function
Component
Nr
Keys with the numeric values 0-9 in the lower
part of the 'Printer operator panel', that allow
the operator to enter a numeric value, for ex-
ample the number of prints.
'Numeric keys'
1
Key 
that allows the operator to select the op-
tion 
displayed in lower left corner of the screen
of the 'Printer operator panel'.
'Lower left...

Description / Function
Component
Nr
The status light indicates the status of the
printer. • A green
 light indicates that the printer is
ready.
• A blinking

 green light indicates that the
printer

 is busy.
• A red light can 
indicate the following.
–
 the printer is calibrating
–
 the printer is not ready
–
 an error occurred
• A blinking red light indicates that the
printer

 is busy and an error occurred.
'Status 
light'
4
Key 
that allows the operator to select the op-
tion 
displayed in...

Description / Function
Component
Nr
The green key on the printer operator panel
that 
allows the operator to start a print job
from 
the 'Queue' or a 'Smart Inbox'.
'Green start
 key'
10
The
 
red key on the 'Printer operator panel'
that 
allows the operator to immediately stop
the print
 job that is currently printed.
'Red 
stop key' 11 /
B Chapter 2
 - Get to know the printing system 33The hardware of the Printer operator panel
Downloaded From ManualsPrinter.com...

The main screens on the printer operator panel
#
Function
Screen
The 'Home' screen is the basic screen that displays only the
most relevant information: the condition of the system and
what it is doing now.
Tasks (performed by 'Any user'):
• Monitor
 the system status.
Note:
The information in the 'Home' screen is equivalent to
the system messages displayed in the 'System' tab of the
'Océ 
EWT'. The 'Smart Inbox' screen displays your jobs at the printer....

Function
Screen
The 'Queue' screen allows you to monitor and control the
progress of print jobs.
Tasks (performed by 'Any user'):
• Monitor
 print jobs - what is the progress (= the 'Queue'
pane). (see

 ‘The 
job states’  on page 213)
• Solve
 problems with jobs 
- media requests.
• Pause and
 resume print jobs.
Note:
The 'Queue' screen is partly equivalent to the 'Queue'
pane 
in the 'Jobs' tab of the 'Océ EWT'. The 'System' screen is your...

Function
Screen
The 'Maintenance' screen allows you to perform mainte-
nance tasks and troubleshooting tasks.
Tasks (performed by 'Any user', but most likely by the 'Key
operator') to
 solve 
problems with the printer:
• 'Calibration'
'Calibrate the
 printer'
• - 'Clear

 system'
'Remove
  all jobs from 
system'
• 'Demo 
print'
'Print a demo image':
–'Demoprint Economy
  Mode'
–'Demoprint Presentation
  Mode'...

Finishing
The finishing options
Introduction
The Océ ColorWave 600 is delivered with a 'Top delivery tray' to collect your printed
output. The 
'Top delivery tray' can collect 50 - 100 plain paper prints with a maximum length
of
 48" [1200mm].
Note:
The media type you use influences the output capacity. In the Océ Express WebTools you 
can define the default 'Delivery destination' for your
printed output. • If you

 select 
'Top delivery tray' your printed output is by...

The finishing options
#
Illustration
'Receiving rack (basket)' The 'Receiving rack (basket)' is hooked
at 
the rear side of the printer. It can
collect
 2 - 5 prints. The 'Receiving rack
(basket)' 

bends the printed output. Not
all media types are 
appropriate for this
finishing option.
Note:
The 'Receiving rack (basket)' is
not 
supported in combination
with
 the folder or Copy delivery
tray. #
Illustration
Folder The 
folder is an automatic folder that
folds large...

#
Illustration
Copy delivery tray The Copy delivery tray is a flat tray be-
hind the printer. The Copy delivery tray
can collect a maximum of 100 prints.
Note:
The folder is not supported in
combination with
 the 'Receiv-
ing rack

 (basket)' or folder. Chapter 2
 - Get to know the printing system 39The finishing options
Downloaded From ManualsPrinter.com Manuals 

Define the folder value
Introduction
If you use a folder you must set the folder value.
Attention:
Please do not change the 'Configuration' - 'Printer setup' - 'Finishing' - 'Model name
(configType)' setting.
 This setting is intended for service purposes 
only. How to define the folder value
Attention:
Access the Océ Express WebTools. This setting is editable for the System administrator
the Power
 user. 1.
Navigate 
to 'Configuration' - 'Printer setup' -...