OKI B6500n User Manual
Have a look at the manual OKI B6500n User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 103 Oki manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
B6500 User’s Guide> 71 Parity None None Even OddPress < > or < > buttons to toggle between None, Even, and Odd. Press to save the selection. DTR Ready/ BusyOff Off OnPress < > or < > buttons to toggle between Off and On. Press to save the selection. DTR On1/Off1 Off Off OnPress < > or < > buttons to toggle between Off and On. Press to save the selection. DTR Error Off Off OnPress < > or < > buttons to toggle between Off and On. Press to save the selection. RTS Ready/ BusyOff Off OnPress < > or < > buttons to toggle between Off and On. Press to save the selection. RTS On1/Off1 Off Off OnPress < > or < > buttons to toggle between Off and On. Press to save the selection. RTS Error Off Off OnPress < > or < > buttons to toggle between Off and On. Press to save the selection. XON Ready/ BusyOn Off OnPress < > or < > buttons to toggle between Off and On. Press to save the selection. SubmenusDefault SettingAvailable SettingsProcedure for Changing Setting Downloaded From ManualsPrinter.com Manuals
B6500 User’s Guide> 72 XON On1/Off1 On Off OnPress < > or < > buttons to toggle between Off and On. Press to save the selection. XON Error Off Off OnPress < > or < > buttons to toggle between Off and On. Press to save the selection. DTR Polarity High High LowPress < > or < > buttons to toggle between High and Low. Press to save the selection. RTS Polarity High High LowPress < > or < > buttons to toggle between High and Low. Press to save the selection. Robust XON Off Off OnPress < > or < > buttons to toggle between Off and On. Press to save the selection. PS Protocol ASCII ASCII RAWPress < > or < > buttons to toggle between ASCII and RAW. Press to save the selection. SubmenusDefault SettingAvailable SettingsProcedure for Changing Setting Downloaded From ManualsPrinter.com Manuals
B6500 User’s Guide> 73 USB Menu The USB Menu provides access to the USB settings. Use the following procedure to enter the USB menu: 1.Press the MENU button on the control panel. 2.Press the < > NEXT button until the text “USB Menu” is shown on the first line of the display. 3.Press the < > button to enter the USB menu. 4.Press the or buttons to move through the submenus. 5.Press the < > button to enter the submenu. Use the procedures in the following table to access and change the USB Menu settings: SubmenusDefault SettingAvailable SettingsProcedure for Changing Setting USB This submenu allows you to set up the USB interface.Enabled Enabled DisabledPress < > or < > buttons to toggle between Enable and Disable. Press to save the selection. PS Protocol ASCII ASCII RAWPress < > or < > buttons to toggle between ASCII and RAW. Press to save the selection. Downloaded From ManualsPrinter.com Manuals
B6500 User’s Guide> 74 Network Menu The Network Menu provides access to the printer network settings. Use the following procedure to enter the network menu: 1.Press the MENU button on the control panel. 2.Press the < > button until the text “Network Menu” is shown on the first line of the display. 3.Press the < > button to enter the Network menu. 4.Press the or buttons to move through the submenus. 5.Press the < > button to enter the submenu. Use the procedures in the following table to access and change the Network Menu settings: SubmenusDefault SettingAvailable SettingsProcedure for Changing Setting TCP/IP Enabled Enabled DisabledPress < > or < > buttons to toggle between Enable and Disable. Press to save the selection. Ethertalk Enabled Enabled DisabledPress < > or < > buttons to toggle between Enable and Disable. Press to save the selection. IP Address Set Automatic Automatic ManualPress < > or < > buttons to toggle between Automatic and Manual. Press to save the selection. Downloaded From ManualsPrinter.com Manuals
B6500 User’s Guide> 75 IP Address (user-specified) (user-specified) The first set of numbers blinks Press < > or < > to scroll to the desired number. Press < > to save the current set of numbers and move to the next set. Repeat the procedure for each set of numbers. When the last set of numbers is set, press to save the IP address. Subnet Mask (user-specified) (user-specified) The first set of numbers blinks Press < > or < > to scroll to the desired number. Press < > to save the current set of numbers and move to the next set. Repeat the procedure for each set of numbers. When the last set of numbers is set, press to save the IP address. Gateway Address(user-specified) (user-specified) The first set of numbers blinks Press < > or < > to scroll to the desired number. Press < > to save the current set of numbers and move to the next set. Repeat the procedure for each set of numbers. When the last set of numbers is set, press to save the IP address. Initialize NIC Execute Execute Press to initialize the NIC. SubmenusDefault SettingAvailable SettingsProcedure for Changing Setting Downloaded From ManualsPrinter.com Manuals
B6500 User’s Guide> 76 We b En a b l ed En a b l ed DisabledPress < > or < > buttons to toggle between Enable and Disable. Press to save the selection. SNMP Enabled Enabled DisabledPress < > or < > buttons to toggle between Enable and Disable. Press to save the selection. Hub Link SettingAuto Negotiate Auto Negotiate 10 Base-T Full 10 Base-T Half 100 Base-T Full 100 Base-T HalfPress < > or < > buttons to scroll through the selections. Press to save the selection. PS Protocol ASCII ASCII RAWPress < > or < > buttons to toggle between ASCII and RAW. Press to save the selection. SubmenusDefault SettingAvailable SettingsProcedure for Changing Setting Downloaded From ManualsPrinter.com Manuals
B6500 User’s Guide> 77 Sys Adjust Menu The Sys Adjust Menu provides access to the tray adjustment settings. Use the following procedure to enter the Sys Adjust menu: 1.Press the MENU button on the control panel. 2.Press the < > button until the text “Sys Adjust Menu” is shown on the first line of the display. 3.Press the < > button to enter the Sys Adjust menu. 4.Press the or button to move through the submenus. 5.Press the < > button to enter the submenu. Use the procedures in the following table to access and change the Sys Adjust Menu settings: SubmenusDefault SettingAvailable SettingsProcedure for Changing Setting Tr a y 1 X A d j u s t This submenu fine adjusts the registration in the X axis.80 to 15 Press < > (increase number) to move the image to the right or press < > (decrease number) to move the image to the left. Press to save the selection. Tr a y 1 Y A d j u s t This submenu fine adjusts the registration in the Y axis.80 to 15 Press < > (increase number) to move the image to the down or press < > (decrease number) to move the image to the up. Press to save the selection. Tr a y 2 X A d j u s t This submenu fine adjusts the registration in the X axis.80 to 15 Press < > (increase number) to move the image to the right or press < > (decrease number) to move the image to the left. Press to save the selection. Downloaded From ManualsPrinter.com Manuals
B6500 User’s Guide> 78 Tr a y 2 Y A d j u s t This submenu fine adjusts the registration in the Y axis.80 to 15 Press < > (increase number) to move the image to the down or press < > (decrease number) to move the image to the up. Press to save the selection. Tr a y 3 X A d j u s t This submenu fine adjusts the registration in the X axis.80 to 15 Press < > (increase number) to move the image to the right or press < > (decrease number) to move the image to the left. Press to save the selection. Tr a y 3 Y A d j u s t This submenu fine adjusts the registration in the Y axis.80 to 15 Press < > (increase number) to move the image to the down or press < > (decrease number) to move the image to the up. Press to save the selection. Tr a y 4 X A d j u s t This submenu fine adjusts the registration in the X axis.80 to 15 Press < > (increase number) to move the image to the right or press < > (decrease number) to move the image to the left. Press to save the selection. Tr a y 4 Y A d j u s t This submenu fine adjusts the registration in the Y axis.80 to 15 Press < > (increase number) to move the image to the down or press < > (decrease number) to move the image to the up. Press to save the selection. SubmenusDefault SettingAvailable SettingsProcedure for Changing Setting Downloaded From ManualsPrinter.com Manuals
B6500 User’s Guide> 79 Duplex X Adjust This submenu fine adjusts the registration in the X axis.80 to 15 Press < > (increase number) to move the image to the right or press < > (decrease number) to move the image to the left. Press to save the selection. Duplex Y Adjust This submenu fine adjusts the registration in the Y axis.80 to 15 Press < > (increase number) to move the image to the down or press < > (decrease number) to move the image to the up. Press to save the selection. Auto Resize This menu will scale the output of a job to the size selected. Disable Enable DisablePress < > or < > to toggle between Enable and Disable. Press to save this setting. PCL Tray1 ID# PCL escape sequence parameter value.0001 0000 to 9999 Press < > or < > buttons to increase or decrease the digit in the selected position. Press the < > to select the digit and move to the next position Press after changing the last digit to save this setting. PCL Tray2 ID# PCL escape sequence parameter value.0004 0000 to 9999 Press < > or < > buttons to increase or decrease the digit in the selected position. Press the < > to select the digit and move to the next position Press after changing the last digit to save this setting. SubmenusDefault SettingAvailable SettingsProcedure for Changing Setting Downloaded From ManualsPrinter.com Manuals
B6500 User’s Guide> 80 PCL Tray3 ID# PCL escape sequence parameter value.0005 0000 to 9999 Press < > or < > buttons to increase or decrease the digit in the selected position. Press the < > to select the digit and move to the next position Press after changing the last digit to save this setting. PCL Tray4 ID# PCL escape sequence parameter value.0006 0000 to 9999 Press < > or < > buttons to increase or decrease the digit in the selected position. Press the < > to select the digit and move to the next position Press after changing the last digit to save this setting. PCL Auto ID# PCL escape sequence parameter value.0007 0000 to 9999 Press < > or < > buttons to increase or decrease the digit in the selected position. Press the < > to select the digit and move to the next position Press after changing the last digit to save this setting. Hex Dump Disable Enable DisablePress < > or < > to toggle between Enable and Disable. Press to save this setting. SubmenusDefault SettingAvailable SettingsProcedure for Changing Setting Downloaded From ManualsPrinter.com Manuals