OKI C530dn User Manual

							81  –  C330/C530 Replacing Consumables and Maintenance 
3.Put the cartridge down gently onto a piece of paper to 
prevent toner from marking your furniture
4.Clean the top of the ID unit with a clean, lint free cloth.
5.Remove the new cartridge from its box but leave its wrapping 
material in place for the moment.
6.Gently shake the new cartridge from end to end several 
times to loosen and distribute the toner evenly inside the 
cartridge.
7.Remove the wrapping material.
Downloaded From ManualsPrinter.com Manuals 
						

							82  –  C330/C530 Replacing Consumables and Maintenance 
8.Holding the cartridge by its top center, lower it into the area 
of the image drum unit from which the old cartridge was 
removed.
9.Pressing gently down on the cartridge to ensure that it is 
firmly seated, slide the colored collar (1) fully towards the 
left hand side of the printer. This will lock the cartridge into 
place and release toner into the image drum unit. 
Downloaded From ManualsPrinter.com Manuals 
						

							83  –  C330/C530 Replacing Consumables and Maintenance 
10.Gently wipe the LED head surface with a clean, lint free cloth.  
11.Finally, close the top cover and press down firmly so that the 
cover latches closed.
Downloaded From ManualsPrinter.com Manuals 
						

							84  –  C330/C530 Replacing Consumables and Maintenance 
Image Drum Replacement. ________
1.Press the cover release and open the printer’s top cover fully.
CAUTION!
Static sensitive devices, handle with care. 
WARNING!
If the printer has been powered on, the fuser will be 
hot. This area is clearly labelled. Do not touch.
Downloaded From ManualsPrinter.com Manuals 
						

							85  –  C330/C530 Replacing Consumables and Maintenance 
2.Holding it by its handles, lift the image drum assembly, complete with 
toner cartridges, up and out of the printer.
 
3.Put the assembly down gently on a piece of paper to prevent 
toner from marking your furniture and to avoid damaging the 
green drum surface.
CAUTION!
The green image drum surface at the base of the 
ID unit is very delicate and light sensitive. Do not 
touch it and do not expose it to normal room light 
for more than 5 minutes. If the drum unit needs 
to be out of the printer for longer than this, 
please wrap the cartridge inside a black plastic 
bag to keep it away from light. Never expose the 
drum to direct sunlight or very bright room 
lighting.
Downloaded From ManualsPrinter.com Manuals 
						

							86  –  C330/C530 Replacing Consumables and Maintenance 
4.Note the positions of the toner cartridges in the drum (1 = 
Yellow, 2 = Magenta, 3 = cyan, 4 = black). It is essential that 
you replace them in the same order. 
5.Remove the four toner cartridges from the drum:
1
2
3
4
Downloaded From ManualsPrinter.com Manuals 
						

							87  –  C330/C530 Replacing Consumables and Maintenance 
(a) Slide the colored release collars (1) on the cartridges 
fully to the right. This will release the bond between the 
toner cartridge and the image drum unit.
Downloaded From ManualsPrinter.com Manuals 
						

							88  –  C330/C530 Replacing Consumables and Maintenance 
6.Lift the right-hand end of each toner cartridge and draw the 
cartridge to the right to release the left-hand end. Then lift 
each toner cartridge out of the image drum and place them  
on a piece of paper to avoid marking your furniture.
Note:
See the instructions that come with the new image drum 
for additional information such as the removal of 
packaging material etc.
Downloaded From ManualsPrinter.com Manuals 
						

							89  –  C330/C530 Replacing Consumables and Maintenance 
7.Take the new image drum cartridge out of its packaging and 
place it on the piece of paper where the old cartridge was 
placed. Keep it the same way round as the old unit. Pack the 
old cartridge inside the packaging material for disposal. 
8.Place each of the toner cartridges in the new image drum 
reversing the process used to remove them. Be sure to put 
them in in the proper sequence. Slide the collars back to the 
left to secured the cartridges in place. (It is not necessary to 
fit a new toner cartridge at this time unless the remaining 
toner level is very low.)
Downloaded From ManualsPrinter.com Manuals 
						

							90  –  C330/C530 Replacing Consumables and Maintenance 
9.Holding the complete assembly by its handles, lower it into 
place in the printer, locating the pegs at each end into their 
slots in the sides of the printer cavity.
Downloaded From ManualsPrinter.com Manuals