OKI MC360 User Manual

MFP overview > 11
MFP OVERVIEW
FRONT VIEW
1. Scanner bed. 6. Output stacker, face down. Standard 
printed copy delivery point. Holds up to 
150 sheets of 80g/m².
2. Automatic Document Feeder (ADF) Unit. 7.  Standard paper tray with level indicator. 
Holds up to 250 sheets of 80g/m².
3. ADF Paper Tray. Max. 50 sheets A4 at 
60 - 120g/m². 8. Multi purpose feeder tray (shown 
closed). Used for feeding heavier paper 
stocks, envelopes and other special media. 
Also used for manual feeding of single 
sheets...

MFP overview > 12
REAR VIEW
This view shows the connection panel and the rear output stacker.
When the rear paper stacker is folded down, pa per exits through the rear of the printer and 
is stacked here face up. This is mainly  used for heavy print media. When used in 
conjunction with the multi purpose feed tr ay, the paper path through the printer is 
essentially straight. This avoids bending the  paper around curves in the paper path and 
enables feeding of up to 203g/m² media.
1. USB connection. 5....

MFP overview > 13
CONTROL PANEL
1. Keypad Used to enter numbers, upper-case/lower-case letters and symbols in the Entry Line. Refer to “Character switching” on page 14  for further details.
2. LEFT key When in switching Mode: Returns the display to the Function Selection screen or Scan Sub Function 
Selection screen from the Stand-by screen.
When Setting up:
Increments the value of the tree structure.
3. UP Key When setting up or in switching Mode: Moves the cursor UP.
4. DOWN Key When setting up or in...

MFP overview > 14
CHARACTER SWITCHING
Numbers, upper and lower case letters and symbols can be entered using the keypad. Press 
the key multiple times to switch between characters. 
The example below is based on English being the display language:
9. STOP Key Stops the function being executed. 
Stops Copy. 
Stops Scan to E-mail/ USB Memory/ Network PC.
Stops Fax Send.
Cancels Print Job.
Recover from Error/Warning states:
Used to confirm error messages (w hen an error that does not need 
recovery...

MFP overview > 15
CHANGING THE DISPLAY LANGUAGE
The default language used by your MFP for display messages is English. If required, this 
can be changed using the Panel Language Setup utility.
Downloaded From ManualsPrinter.com Manuals 

Getting started > 16
GETTING STARTED
RELEASING THE SCANNER LOCK 
1.Open the document cover.
2. Move scan lock lever to UNLOCKED position. 
SWITCHING OFF
1.Press the Down arrow button on the control panel to highlight  Menu, press  Enter to 
select.
2. Press the Down arrow button on the control panel to highlight  System Shutdown, 
press  Enter to select.
3. Press  Enter to execute.
4. At the prompt, turn the power switch OFF.
CAUTION!
Make sure the scanner is in  the UNLOCKED position before...

Getting started > 17
INSTALLING DRIVERS AND UTILITIES
Install the appropriate drivers for your connection type:
> Network connection; install the printer driver
> USB connection; install the prin ter driver and the TWAIN driver
The installation instructions below refer to  USB connection. For network connection details 
refer to the Network Guide.
If you are running Windows Server 2003 or  Server 2008, you may need to follow these 
steps to ensure the WIA service starts when using the TWAIN driver and...

Getting started > 18
2.Plugging the printer in first and performing  a “Plug and play” type of installation. In 
this case you must install the TWAIN driver first.
Plug and play installation
The MFP is a “dual device” - Windows sees it  as a scanner and a printer. This means when 
the MFP is plugged into a PC using a USB cable,  youll be prompted to install 2 different 
drivers; the TWAIN (scanner) driver  first and then the printer driver.
1. Attach the printer to a USB port of your computer.
2. Switch...

Getting started > 19
5.Next install the printer driver.
MAC - PRINTER DRIVER
The information in this section is based on Mac OS X Leopard (10.5). Other versions may 
appear slightly different, but the principles are the same.
1.Insert the DVD-ROM and run the  Oki driver installer program.
2. Follow the on-screen instructions to install the printer driver.
3. Attach the printer to a USB port of your computer.
4. Switch on the printer.
5. Choose  Apple Menu > System Preferences > Print & Fax .
6. If the...

Getting started > 20
10.Select your printer model and click  Add.
11. The printer is added to the list of printers.
12. Restart your computer.
FAX DRIVER (MC360 ONLY)
The fax driver allows you to send faxes direct ly from your computer without printing the 
document first.
Windows XP has built-in fax support - you ca n use your computers modem to send faxes 
directly from your computer.
With Okis fax driver you are sending the fax da ta from your computer to the MFP, and then 
the MFP automatically...