Panasonic 32" 39" 40" Class 720p 1080p Led Lcd Tv Tc 32a400 Owners Manual

							Using the Menu Functions
21English
e you 
” 
nsult 
will 
after 
s of 
lock 
S. 
tings.
  [Change password]
Changes the password. 
  ●Input the new 4-digit password, then input again to 
confirm.
Note
  ●This T V is designed to suppor t the “Downloadable 
U.S. Region Rating System” when available (available 
only in the U.S.A.).
  ●The Off rating is independent of other ratings.
  ●When placing a lock on a specific-age-based-rating 
level, the Off rating and any other more restrictive 
ratings will also be blocked.
TV
  [ANTENNA/Cable signal]
Selects the input for [Auto program] (p. 22) and 
[Manual program] (p. 23). [Antenna / Cable]
[Auto program] 
 (p. 22)
[Manual program] 
 (p. 23)
[MTS]
Selects the Audio mode for watching TV. 
[Mono / Stereo / SAP]
  [Audio language]
Selects the language for TV programs. [English /
Spanish / French]
  ●Set [Audio language] to preferred language for all 
broadcast channels.
  ●Language selection using the SAP button on the 
remote control (p. 15) is temporar y (channel 
changes according to [Audio language] setting).
[Preferred audio type]
Narration settings for impaired users. 
[Main audio / Hearing impaired / Visually impaired]
  –
[Hearing impaired]: Activates closed captioning when 
available on broadcasts.
  –
[Visually impaired]: Activates the narration 
soundtrack when available on broadcasts.
  ●For Digital T V only
Setup
 
[Language]
Changes language for on-screen displays. [English / 
Español / Français]
[Timer set]
  ■[Sleep timer]
Sets the period after which the TV will turn off 
automatically. [Off / 15 / 30 / 60 / 90 minutes]
  ■[No signal for 10 minutes]
To conserve energy, the TV automatically turns off 
when NO SIGNAL and NO OPERATION continue for 
more than 10 minutes. [Stay on / Power TV off]
  –
The on-screen display will pop-up 3, 2, and 1 
(minutes) to indicate the last three (3) remaining 
minutes prior to the shut-off.
  ■[No activity for 3 hours]
To conserve energy, the TV automatically turns off 
when no operation of remote control and TV buttons 
continue for more than 3 hours. 
[Stay on / Power TV off]
  –
The on-screen display will pop-up 3, 2, and 1 
(minutes) to indicate the last three (3) remaining 
minutes prior to the shut-off.
  [Closed caption]
This TV includes a built-in decoder that is capable 
of providing a text display of the audio. The program 
being viewed must be transmitting Closed Caption (CC) 
information 
 (p. 27).
The settings in “Analog” or “Digital” depend on the 
broadcaster.
  ■[Analog closed caption]
Selects the Closed Caption service of Analog 
broadcasting. [Off / CC1-4 / TEXT1-4]
  –
[CC1-4]: Information related to pictures (appears at 
the bottom of the screen).
  –
[TEXT1-4]: Textual information (appears over the 
entire screen).
  ■[Digital closed caption]
Lets you configure the way you choose to view the 
digital captioning. [Off / Service 1-6]
  ■[Digital setting]
Sets display settings in digital program.
[Caption style: Auto]: The default settings are 
displayed.
[Caption style: Custom]: You can personalize below 
items to your preference:
  • Font size
  • Font style
  • Font color
  • Font opacity
  • Background color
  • Background opacity
  • Outline color
  • Outline opacity
TC-40A420_32_39A400U_EN.indd   21TC-40A420_32_39A400U_EN.indd   2128-Apr-14   4:28:20 PM28-Apr-14   4:28:20 PM 
						

							Using the Menu Functions  |  Auto Program
22English
  [Input labels]  (p. 23)
[HDMI control]
  ■[CEC function]
Sets how the TV responds when you operate an HDMI 
connected equipment. [Off / On]
  –
[On]: The TV will automatically switch to the 
appropriate HDMI input whenever an HDMI 
connected equipment is initially turned on and the 
Play mode is selected. 
  ■[Power off link]
Sets how an HDMI connected equipment responds 
when you turn off the TV. [No / Yes]
  –
[Yes]: When the TV is turned off, all HDMI connected 
equipment is also automatically turned off.
  • A Panasonic DVD Recorder will not turn off if it is 
still in Rec mode.
  • The TV remains on even if the HDMI connected 
equipment is turned off.
[About]
Displays TV version and software license.
  [Reset to defaults]
Performing reset will clear all settings made in the 
[Setup] menu, such as channel settings.
After reset, “First Time Setup” will launch when you next 
power on the TV (p. 12).
  Auto Program
This function lets you retune and add all available 
channels to the channel list automatically.
  Before performing this function, be sure to set 
[ANTENNA/Cable signal] to the input you want to tune.
Note
  ●This functions is only available in T V mode.
  ●How to navigate the menu  (p. 18)
1 Display the menu
MENU
2 Select [TV], then select [Auto 
program]
Main Menu
Picture
Sound
Lock
TV
SetupANTENNA/Cable signal Antenna
Auto program AccessManual program
MTS Stereo
Preferred audio type Main audio Audio language English
Scanning starts.
3%
Status: Scanning..
Analog channels: 1
Digital channels: 0Antenna
  ●The T V automatically searches and adds available 
channels to the memor y. 
  ●After the scan is completed, all previously saved 
channels will be erased.
  ■To cancel scanning processRETURN
 
Ma
This fchann
 
Before[ANTE
No
  ●This
  ●How
1 D
MEN
2 Se
pr
3 Se
re
2
3
4
5
6
7
8
9
10
 
 
  ■To  
C
TC-40A420_32_39A400U_EN.indd   22TC-40A420_32_39A400U_EN.indd   2228-Apr-14   4:28:20 PM28-Apr-14   4:28:20 PM 
						

							Manual Program | Input Labels
23English
une.
ble 
  Manual Program
This function lets you add or remove channels from the 
channel list.
  Before performing this function, be sure to set 
[ANTENNA/Cable signal] to the input you want to edit.
Note
  ●This functions is only available in T V mode.
  ●How to navigate the menu  (p. 18)
1 Display the menu
MENU
2 Select [TV], then select [Manual 
program]
Main Menu
Picture
Sound
Lock
TV
SetupANTENNA/Cable signal
Antenna
Auto program
Manual program
AccessMTS
Stereo
Preferred audio type
Main audio Audio language
English
3 Select the channel you want to set/
remove from the channel list
2
3
4
5
6
7
8
9
10AnalogAnalog
Analog Analog
Analog Analog
Analog
Analog
Analog
 :channel will be removed from the channel list
(You cannot select the channel using CH up/
down button.)
 :channel will remain on the channel list
  ■To change channel list pages
CHNext page Previous page
  Input Labels
You can label the terminal with the type of equipment 
connected to it. This makes selecting the correct input 
easier (Input select 
 p. 15). 
You can also skip any unused terminal with this feature.
Note
  ●How to navigate the menu  (p. 18)
1 Display the menu
MENU
2 Select [Setup], then select [Input 
labels]
Main Menu
Picture
Sound
Lock
TV
Setup
Timer set Language English
Closed caption
Input labels Access
About HDMI control
Reset to defaults
3 Select an input terminal and set
Main Menu
Picture
Sound
Lock
TV
Setup
HDMI 1 ANTENNA/Cable InHDMI 2Comp./VideoBlu-ray
  ●The labels you set will be displayed in the [Input 
select] screen (p. 15).
  ●If [Not used] is selected, you cannot select the input.
TC-40A420_32_39A400U_EN.indd   23TC-40A420_32_39A400U_EN.indd   2328-Apr-14   4:28:21 PM28-Apr-14   4:28:21 PM 
						

							Ratings List for Parental Control
24English
  Ratings List for 
Parental Control
“V-chip” technology enables you to lock channels 
or shows according to standard ratings set by the 
entertainment industry.
U.S. TV programs ratings 
[U.S. TV ratings]
NR (Not Rated)
  ■TV-NR
Not Rated.
Possible content selections: 
  –
Viewable
  –
Blocked
Youth
  ■TV-Y
All children. The themes and elements in this program 
are specifically designed for a very young audience, 
including children from ages 2-6.
Possible content selections: 
  –
Viewable
  –
Blocked
  ■TV-Y7
Directed to older children. Themes and elements in 
this program may include mild physical or comedic 
violence, or may frighten children under the age of 7.
Possible content selections: 
  –
FV blocked
  –
Viewable
  –
Blocked
Guidance
  ■TV-G
General audience. It contains little or no violence, no 
strong language, and little or no sexual dialogue or 
situations.
Possible content selections: 
  –
Viewable
  –
Blocked
  ■TV-PG
Parental guidance suggested. The program may 
contain infrequent coarse language, limited violence, 
some suggestive sexual dialogue and situations.
Possible content selections:
  –
D, L, S, V (all selected)
  –
Any combination of D, L, S, V
  ■TV-14
Parents strongly cautioned. This program may contain 
sophisticated themes, sexual content, strong language 
and more intense violence.
Possible content selections: 
  –
D, L, S, V (all selected)
  –
Any combination of D, L, S, V
  ■TV-MA
Mature audiences only. This program may contain 
mature themes, profane language, graphic violence, 
and explicit sexual content.
Possible content selections: 
  –
L, S, V (all selected)
  –
Any combination of L, S, V
FV: Fantasy/Cartoon Violence 
V: Violence 
S: Sex 
L: Offensive Language 
D: Dialogue with sexual content
[U.S. Movie ratings]
  ■NR
NO RATING (NOT RATED) AND NA (NOT 
APPLICABLE) PROGRAMS. Movie which has not 
been rated or where rating does not apply.
  ■G
GENERAL AUDIENCES. All  ages  admitted.
  ■PG
PARENTAL GUIDANCE SUGGESTED. Some material 
may not be suitable for children.
  ■PG-13
PARENTS STRONGLY CAUTIONED. Some material 
may be inappropriate for children under 13.
  ■R
RESTRICTED. Under 17 requires accompanying 
parent or adult guardian.
  ■NC-17
NO ONE 17 AND UNDER ADMITTED.
  ■X
ADULTS ONLY.
 
  ■E
Exe
doc
utalk 
  ■C
Pro
goffen
  ■C8
Progchildsexu
  ■G
Ge
n
  ■PG
Parebe s
  ■14+
ProgmayPareperm
  ■18+
18+ 
Conviole
  ■E
Exe
  ■G
Ge
nagesmini
  ■8 a
8+ GProgcontreco
  ■13 
Pro
gthe aone 
Adu
  ■16 
Pro
gthe ainten
  ■18 
Pro
gviole
TC-40A420_32_39A400U_EN.indd   24TC-40A420_32_39A400U_EN.indd   2428-Apr-14   4:28:22 PM28-Apr-14   4:28:22 PM 
						

							Ratings List for Parental Control  |  Additional Information
25English
ntain uage 
n ce, 
t 
aterial 
erial 
CANADIAN ENGLISH RATINGS 
[C. E. L. R.]
  ■E
Exempt - Exempt programming includes: news, sports, 
documentaries and other information programming, 
talk shows, music videos, and variety programming.
  ■C
Programming intended for children under age 8. No 
offensive language, nudity or sexual content.
  ■C8+
Programming generally considered acceptable for 
children 8 years and over. No profanity, nudity or 
sexual content.
  ■G
General programming, suitable for all audiences.
  ■PG
Parental Guidance suggested. Some material may not 
be suitable for children.
  ■14+
Programming contains themes or content which 
may not be suitable for viewers under the age of 14. 
Parents are strongly cautioned to exercise discretion in 
permitting viewing by pre-teens and early teens.
  ■18+
18+ years old. Programming restricted to adults. 
Contains constant violence or scenes of extreme 
violence.
  CANADIAN FRENCH RATINGS 
[C. F. L. R.]
  ■E
Exempt - Exempt programming.
  ■G
General - Programming intended for audience of all 
ages. Contains no violence, or the violence content is 
minimal or is depicted appropriately.
  ■8 ans+
8+ General - Not recommended for young children. 
Programming intended for a broad audience but 
contains light or occasional violence. Adult supervision 
recommended.
  ■13 ans+
Programming may not be suitable for children under 
the age of 13 - Contains either a few violent scenes or 
one or more sufficiently violent scenes to affect them. 
Adult supervision strongly suggested.
  ■16 ans+
Programming may not be suitable for children under 
the age of 16 - Contains frequent scenes of violence or 
intense violence.
  ■18 ans+
Programming restricted to adults. Contains constant 
violence or scenes of extreme violence.
Caution
  ●The V-Chip system that is used in this set is capable 
of blocking “NR” programs (non rated, not applicable 
and none) as per FCC Rules Section 15.120(e)(2). 
If the option of blocking “NR” programs is chosen 
“unexpected and possibly confusing results may 
occur, and you may not receive emergency bulletins 
or any of the following types of programming:”
  –
Locally originated programming
  –
News
  –
Political
  –
Public Service Announcements
  –
Religious
  –
Sports
  –
Weather
Additional 
Information
  Channel banner
Channel banner is available when watching programs 
via the Antenna/Cable input.
14-1
ABC-HD7:00 AM - 8:00 AM
TV-G CC1 480i SDThe News 480i
12 3410
678 9
5
SAPAntenna
1Station identifier
2Channel
3Input signal
4Rating level
5Program
6Program duration
7Favorite channel
8Closed caption
9Signal resolution
10Audio mode available
 
Format (aspect ratio)
  ■[FULL]
Displays a 4:3 image enlarged horizontally to fit the 
screen. 
  –
Recommended for anamorphic picture.
  ■[4:3]
Displays the image at the standard 4:3 without 
distortion. 
  –
Note that “Image retention” of the side bar may occur 
from displaying it for a long time.
TC-40A420_32_39A400U_EN.indd   25TC-40A420_32_39A400U_EN.indd   2528-Apr-14   4:28:22 PM28-Apr-14   4:28:22 PM 
						

							Additional Information
26English
  ■[JUST]
Stretches to justify the 4:3 image to the four corners of 
the screen. 
  –
Recommended for normal TV broadcast.
  ■[ZOOM]
Enlarges the 4:3 image to the entire screen.
  –
Recommended for Letter Box.
  ■ 
[H-FILL]
Enlarges the 4:3 image horizontally to the side edges 
of the screen. The side edges of the image are cut off.
Note
  ●Options available for:
  –
480i, 480p: [FULL / 4:3 / JUST / ZOOM]
  –
1080p, 1080i, 720p: [FULL / 4:3 / JUST / ZOOM / 
H-FILL]
  ●Some contents, such as film-based movies, are 
available in extra-wide format. Top and bottom bars 
are unavoidable.
  [H size]
  ●For aspect ratio 4:3:
Size 1 Size 2
  –
[Size 2]: The width will be decreased on both sides 
to reduce noise.
  ●For aspect ratio FULL/JUST (H-FILL/ZOOM):
Size 1 Size 2
  –
[Size 2]: The width will be increased on both sides to 
reduce noise.
  ●For aspect ratio FULL (HD signal) (40” class only):
Size 3
  –
Aspect ratio can be corrected by selecting [Size 3] or 
[Size 4] for different mask sizes.
  Input signal that can be displayed
Signal name COMPONENT HDMI
525 (480) / 60i, 60p
750 (720) / 60p
1,125 (1,080) / 60i
1,125 (1,080) / 60p, 24p
 : Applicable input signal
  ●Signals other than above may not be displayed 
properly.
  ●The above signals are reformatted for optimal viewing 
on your display.
Supported file format in Media Player
Media Compatible format
Photo  ●JPEG files (DCF and EXIF standards)
Sub-sampling:
4:4:4, 4:2:2 and 4:2:0
Image resolution:
  • Baseline JPEG: 
15,360 (W) × 8,640 (H)
  • Progressive JPEG: 
1,920 (W) × 1,440 (H)
Music
  ●MP3 files (MPEG Audio Layer-3)
Note
  ●Even if these conditions are fulfilled, some files may 
not play depending on how they are encoded.
  ●The folder and file names may be different depending 
on the digital camera used.
  ●Connected devices may become unusable with this 
T V if the file or folder names are changed.
  ●Do not use two-byte characters or other special 
codes for data.
USB Connections
  ■USB Flash Memory
Format: FAT16, FAT32
Compliance:
Supports only USB1.1 or USB2.0 standard.
Maximum USB capacity supported is 16GB.
USB Hub or card adapter is not supported.
Note
  ●Data modified with a PC may not be displayed.
  ●Do not remove the device while the T V is accessing 
data. Other wise this can damage the device or T V.
  ●Do not touch the pins on the device.
  ●Inser t the device in the correct direction. Other wise 
this can damage the device or T V.
  ●Elecope
is nodevi
  ●It is 
dire
  ●Somwith
  ●Yo u  
read
  ●Add
follo
http
This 
T(high-comp
a non
HDMIand hequip
  ■Ap
  ●Inpu
2ch 
44.1
  ●Inpu
 “
Mat
c
  ●Aud
  ■ 
DV
If the 
to theWhenthe autermin
No
  ●Aud
[Sou
  ●All sthe s
  ●If th
func
  ●The
  ●The
(Higprot
  ●Equ
connVIDAud
digit
TC-40A420_32_39A400U_EN.indd   26TC-40A420_32_39A400U_EN.indd   2628-Apr-14   4:28:22 PM28-Apr-14   4:28:22 PM 
						

							Additional Information
27English
d
DMI
ewing 
er
)
m
ay 
nding 
his 
sing TV.
ise 
  ●Electrical inter ference, static electricity, or erroneous 
operation may damage the data or device. Panasonic 
is not liable for any deterioration or damage of data or 
device during operations with the T V.
  ●It is recommended to connect the USB Flash Memor y 
directly to the T V’s USB por t.
  ●Some USB devices or USB HUB may not be used 
with this TV.
  ●You cannot connect any devices by using USB card 
reader.
  ●Additional information for USB devices may be on the 
following website. (English only)
http://panasonic.jp/support/global/cs/tv/
  HDMI connection
This TV incorporates HDMI™ technology. HDMI 
(high-definition multimedia interface) is the world’s first 
complete digital consumer AV interface complying with 
a non-compression standard.
HDMI allows you to enjoy high-definition digital images 
and high-quality sound by connecting the TV and the 
equipment.
  ■Applicable HDMI features
  ●Input audio signal:
2ch Linear PCM (sampling frequencies - 48 kHz, 
44.1 kHz, 32 kHz)
  ●Input video signal:
 “Input signal that can be displayed” (p. 26)
Match the output setting of the digital equipment.
  ●Audio Return Channel (HDMI 2 terminal only)
  ■ 
DVI connection
If the external equipment has only a DVI output, connect 
to the HDMI terminal via a DVI to HDMI adaptor cable. 
When the DVI to HDMI adaptor cable is used, connect 
the audio cable to the audio input terminal (use AV audio 
terminals).
Note
  ●Audio settings can be made on [HDMI1-2 in] in the 
[Sound] menu.
  ●All signals are reformatted before being displayed on 
the screen.
  ●If the connected device has an aspect adjustment 
function, set the aspect ratio to “16:9”.
  ●These HDMI connectors are “ type A”.
  ●These HDMI connectors are compatible with HDCP 
(High-Bandwidth Digital Content Protection) copyright 
protection.
  ●Equipment having no digital output terminal may be 
connected to the input terminal of COMPONENT or 
VIDEO to receive analogue signals.
Audio Return Channel (ARC) is a function to send 
digital sound signals via an HDMI cable.
DIGITAL AUDIO OUT terminal
You can enjoy your Home theater by connecting a 
Dolby Digital (5.1 channel) decoder and “Multi Channel” 
amplifier to the DIGITAL AUDIO OUT terminals.
Caution
  ●Depending on your DVD player and DVD -Audio 
software, the copyright protection function may 
operate and disable optical output.
  Closed Caption (CC)
  ●For viewing the CC of digital broadcasting, set the 
aspect to [FULL]. (If viewing with [H-FILL], [JUST], 
[ZOOM] or [4:3]; characters might be cut off).
  ●The CC can be displayed on the T V only when the 
receiver (such as a Cable box or satellite receiver) 
has the CC set to “On” within the device itself. Check 
with your Cable or Satellite provider for instructions. 
  ●If the CC is set to “On” on both the receiver and 
T V when the signal is 480i (except for the HDMI 
connection), the CC may overlap on the T V. 
  ●If a digital program is being output in analog format, 
the CC data will also be output in analog format.
  ●If the recorder or output monitor is connected to the 
T V, the CC needs to be set up on the recorder or 
output monitor.
TC-40A420_32_39A400U_EN.indd   27TC-40A420_32_39A400U_EN.indd   2728-Apr-14   4:28:22 PM28-Apr-14   4:28:22 PM 
						

							Maintenance | Troubleshooting
28English
Maintenance
First, unplug the power cord plug from the wall 
outlet.
Power cord plug
Wipe the plug with a dry cloth at regular intervals. 
(Moisture and dust can lead to fire or electrical shock.)
Display panel
The front of the display panel has been specially treated. 
Wipe the panel surface gently, using only a cleaning 
cloth or a soft, lint-free cloth. 
  ●If the sur face is par ticularly dir ty, soak a soft, lint-free 
cloth in diluted, mild liquid dish soap (1 par t mild liquid 
dish soap diluted by 100 times the amount of water) 
and then wring the cloth to remove excess liquid. Use 
this cloth to wipe the sur face of the display panel, 
then wipe it evenly with a dr y cloth of the same type 
until the sur face is dr y. 
  ●Do not scratch or hit the sur face of the panel with 
fingernails or other hard objects. Fur thermore, avoid 
contact with volatile substances such as insect 
sprays, solvents, and thinner; other wise, the quality 
of the sur face may be adversely affected.
Cabinet
If the cabinet becomes dirty, wipe it with a soft, dry cloth.
  ●If the cabinet is par ticularly dir ty, soak the cloth in 
diluted, mild liquid dish soap and then wring the cloth 
dr y. Use this cloth to wipe the cabinet and then wipe it 
dr y with a dr y cloth.
  ●Do not allow any mild liquid dish soap to come into 
direct contact with the sur face of the T V. If water 
droplets get inside the unit, operating problems may 
result.
  ●Avoid contact with volatile substances such as insect 
sprays, solvents, and thinner; other wise, the quality 
of the cabinet sur face may be adversely affected or 
the coating may peel off.
  ●Do not let ar ticles made from rubber or PVC be in 
contact with the T V for long periods of time.
Pedestal
  ●Wipe the sur faces with a soft, dr y cloth. If the unit is 
par ticularly dir ty, clean it using a cloth soaked with 
water to which a small amount of mild liquid dish soap 
has been added and then wipe with a dr y cloth.
Do not use products such as solvents, thinner, or 
household wax for cleaning, as they can damage the 
surface coating. (If using a chemically-treated cloth, 
follow the instructions supplied with the cloth.) 
  ●Do not attach sticky tape or labels, as they can make 
the sur face of the pedestal dir ty. Do not allow long-
term contact with rubber, vinyl products, or the like. 
(Doing so will cause deterioration.)
Troubleshooting
Before requesting service or assistance, please follow 
these simple guides to resolve the problem.
If an error message appears, follow the message’s 
instructions.
If the problem still persists, please contact your local 
Panasonic dealer for assistance.
Picture
Why is there no picture or just a blue, black or 
snowy screen being displayed?
  Check if the power cord is plugged in and the TV 
is turned on (front red LED light should be on; not 
blinking).
  Press the INPUT button on the remote control to 
select the correct input source.
  Ensure all connections are correct and secure.  When using external video source, such as a Cable/
Satellite box or DVD player, check that the device is 
on and functioning correctly.
  Press MENU on the remote control. If the menu is 
displayed, then the TV is working; recheck above 
steps.
Why doesn’t the picture look like it is in High-
Definition?
  Press INFO on the remote control to confirm the 
type of signal being received. HD signal should be 
720p, 1080i or 1080p.
  Select a High-Definition channel from your HD 
source (Cable, Satellite or fiber optic service). HD 
channels sometimes broadcast non-HD content.
  Ensure that your HD source (HD box, Blu-ray 
player, etc.) is connected to the TV with an HDMI or 
COMPONENT cable and set to output an HD video 
signal.
Why do black bars appear on the top and bottom 
and/or sides of the screen?
  Change the format (aspect ratio) of the picture by 
pressing FORMAT on the remote control (p. 15).
  Check the aspect settings on your external video 
source, such as Cable/Satellite box, DVD/Blu-ray 
Disc player, etc.
Note: Some content, such as film-based movies, are 
available in extra-wide format. Top and bottom bars 
are unavoidable.
Why is the picture snowy when [ANTENNA/Cable 
In] is selected?
  When using a cable service (without a box), check 
that all connections are secure. 
  When using a cable or satellite box, change the 
connection to COMPOSITE, COMPONENT or HDMI 
(p. 11-12).
  If you’re using an antenna, then check that 
connections are secure. Change the position or 
direction of the antenna and check the [Signal 
meter] (p. 14).
Whya bu  Chapne  TryDVso
Why  Ch(p.
Whyblink  Thits
cosu
bli
(U
(
C
Whybrigh  Thananbedepe
Sou
Why  Ma  ChPrrem  If tcais   Ch(p.
Whyor in  ChPrrem  Chco  Whdebo
Whycom  Wheleis   Chroothaop
TC-40A420_32_39A400U_EN.indd   28TC-40A420_32_39A400U_EN.indd   2828-Apr-14   4:28:23 PM28-Apr-14   4:28:23 PM 
						

							Troubleshooting
29English
ow 
al 
V ot 
o 
able/ce is 
is 
e 
 
be 
D 
MI or deo 
om 
y 
.
o y 
, are 
ars 
ble 
ck 
HDMI 
Why is the picture chaotic and/or torn and/or with 
a buzz in the speakers?
  Check if electrical products such as kitchen 
appliances, fluorescent lights or light dimmers are 
nearby. They may interfere with the TV’s picture.
  Try viewing a picture from another device, such as a 
DVD player or a game console, to narrow down the 
source of the problem.
Why is there a black box on the screen?
  Change settings of Closed Caption (CC) 
(p. 15, 27).
Why is the screen blank and the power indicator 
blinking?
  The TV has gone into shutdown mode to protect 
itself. Try unplugging it for a few minutes and 
connecting it again. If there was a temporary power 
surge on the AC line it may now be OK. If the 
blinking returns, visit www.panasonic.com/support 
(U.S.A.) or www.panasonic.ca/english/support 
(Canada).
Why do some small spots on the screen remain 
bright or dark?
  The TV panel is made up of a few million pixels 
and is produced with advanced technology through 
an intricate process. Sometimes a few pixels may 
be bright or dark. These pixels do not indicate a 
defective panel and will have no impact on the 
performance of the TV.
Sound
Why is there no sound coming from the TV?  Make sure the volume is up and MUTE is off.  Check that the correct SAP (Secondary Audio 
Program) is selected by pressing SAP on the 
remote control (p. 15).
  If the TV is connected to a Home Theater via optical 
cable, then: Check the connection, the audio system 
is on, the correct input is selected.
  Check [HDMI1-2 in] analog/digital audio settings 
(p. 20).
Why is the sound unusual, distorted, low volume 
or in another language?
  Check that the correct SAP (Secondary Audio 
Program) is selected by pressing SAP on the 
remote control (p. 15).
  Check that all connections of external equipment 
connected to the TV are secure.
  When using Cable or Satellite box, check the 
device’s audio settings (example: try changing the 
box’s Audio Range to “narrow”).
Why is there a clicking, ticking or buzzing sound 
coming from the TV unit?
  When TV power is turned on or shut off there are 
electrical components that make a click sound. This 
is normal. 
  Changes in the temperature and humidity of the 
room may cause thermal expansion and contraction 
that can produce sounds. This is not a sign of faulty 
operation or a malfunction.
Other
Why does the CC button not display Closed 
Caption?
  When viewing TV via an HDMI connected device, 
such as a Cable or Satellite box, CC must be 
enabled at the device.
  Closed Caption is available only at supported TV 
programming.
Why do parts of the TV become hot?
  The main unit radiates heat and some of the parts 
may become hot. Even if the temperature of parts 
of the front, top and rear panels has risen, these 
temperature rises do not cause any problems in 
terms of performance or quality.
  Ensure good ventilation.  Do not block the ventilation holes of the TV and do 
not place the TV on top of other equipment.
Why doesn’t the Remote Control work?
  Check that the batteries are fresh, are of the same 
type and are installed with the correct polarity (+ 
and −).
  To operate other devices, such as changing 
channels when using Cable or Satellite boxes or 
operating non-Panasonic Blu-ray players, use the 
remote control of the devices.
TC-40A420_32_39A400U_EN.indd   29TC-40A420_32_39A400U_EN.indd   2928-Apr-14   4:28:23 PM28-Apr-14   4:28:23 PM 
						

							Specifications
30English
Li
 
LimitIf your(referr(“Limitequiva
U 
”6 4
 
On-STo sub
Limit
DuringchargeYo u  mincludeThis Lother p
On-siteor re-inparts o
When 
cartonto provwhere
This Ltear oramongas netor failubug in
impropbusineattribu
THERCOVRESUWARapplicaIMPLTO T
Some 
Warra
This 
Lthis prhandle
PA RTWHIC
  Specifications
Display Panel
Panel System
LCD panel (LED backlight)
Screen size
  • TC-32A400U
32” class (31.5 inches measured diagonally)
  • TC-39A400U
39” class (38.5 inches measured diagonally)
  • TC-40A420U
40” class (39.5 inches measured diagonally)
W × H × Diagonal
  • TC-32A400U
27.4” × 15.4” × 31.5”
(698 mm × 392 mm × 800 mm)
  • TC-39A400U
33.6” × 18.9” × 38.5”
(854 mm × 480 mm × 980 mm)
  • TC-40A420U
34.5” × 19.1” × 39.5”
(878 mm × 485 mm × 1,003 mm)
Number of pixels
  • TC-32A400U
1,366 × 768
  • TC-39A400U, TC-40A420U
1,920 × 1,080
Speaker Output
20 W [10 W + 10 W] (10 % THD)
Channel Capability (Digital/Analog)
VHF/ UHF: 2 - 69, CATV: 1 - 135
Operating Conditions
Temperature:  32 °F - 95 °F (0 °C - 35 °C)
Humidity:  20 % - 80 % RH (non-condensing)
Connection Terminals
VIDEO IN
RCA PIN (VIDEO, AUDIO-L, AUDIO-R)
COMPONENT IN
RCA PIN (Y, P
B, PR, AUDIO-L, AUDIO-R)
HDMI IN 1/2
TYPE A  Connector
USB
USB2.0 Type A connector
DC 5V, Max. 500mA
DIGITAL AUDIO OUT
PCM / Dolby Digital, Fiber Optic
Dimensions
Including pedestal (W × H × D)
  • TC-32A400U
28.9” × 18.8” × 7.3”
(734 mm × 477 mm × 184 mm)
  • TC-39A400U
34.9” × 22.1” × 9.8”
(886 mm × 560 mm × 247 mm)
  • TC-40A420U
35.6” × 22.5” × 9.8”
(904 mm × 570 mm × 247 mm)
TV set only (W × H × D)
  • TC-32A400U
28.9” × 17.2” × 2.8”
(734 mm × 437 mm × 69 mm)
  • TC-39A400U
34.9” × 20.3” × 2.1”
(886 mm × 516 mm × 53 mm)
  • TC-40A420U
35.6” × 20.8” × 2.4”
(904 mm × 527 mm × 59 mm)
Mass
Including pedestal
  • TC-32A400U
13.3 lb. (6 
) NET
  • TC-39A400U
24.3 lb. (11.0 
) NET
  • TC-40A420U
26.4 lb. (12.0 
) NET
TV set only
  • TC-32A400U
12.2 lb. (5.5 
) NET
  • TC-39A400U
22.1 lb. (10.0 
) NET
  • TC-40A420U
23.1 lb. (10.5 
) NET
Note
  ●Design and Specifications are subject to change 
without notice. Mass and Dimensions shown are 
approximate.
  ●For information about the power source and power 
consumption, refer to the nameplate on the rear 
enclosure.
TC-40A420_32_39A400U_EN.indd   30TC-40A420_32_39A400U_EN.indd   3028-Apr-14   4:28:23 PM28-Apr-14   4:28:23 PM