Panasonic Digital Color Imaging Systems Dp C354 Setting Up Operating Instructions

English
Installation Overview
General Installation Overview ........................ 2
Setting Your  Machine
Network Configuration ................................... 4
■Setting up the Network Configuration ........ 4
Installation
■Installing the Printer Driver and Application
Software.................................................... 8
●System Requirements........................... 8
●Software Setup Procedures ................... 8
●Installing the Printer Driver (Network Port
Connection), and the...

2
1Turning the Power Switches ON.
Follow the guidelines in this booklet when setting up the machine and installing each software. Please read all
procedures completely before attempting to setup this machine.
2Setting up the Network Configuration.
Setup the Network Configuration using the
Control Panel of the machine. (See pages 4-7)
 ●  ● ●  ●
 ●Network Configuration should be setup by
the System Administrator.
3Installation
■ ■■ ■
■Installing the Printer Driver and
Application Software
Applications...

Installation Overview
3
5Setting up Optional Accessories.
■ ■■ ■
■ Network Scanner Function*
Requires the installation of Network
Scanner/Email Module (Order Number:
DA-NS320/NS321), Hard Disk Drive Unit
(Order Number: DA-HD32), Main Memory
(Order Number: DA-EMN56) and Page
Memory (Order Number: DA-PMN56).
(See page 33)
■ ■■ ■
■ Facsimile Function
Requires the installation of Fax
Communication Board (Order Number:
DA-FG320) or Fax Communication Board
with Internet Fax (Order Number:
DA-FN350). (See pages...

4
Before executing the procedures
described below, make sure the Print
On Line LED is lit.
1
Press the Function key.
2Select General Settings.
3Select 09 Key Operator Mode.
4Enter the Key Operators Password
(8 digits), and then select OK.
5
12
Follow the procedure below if your network is not configured with the DHCP server, and the TCP/IP parameters must be
setup manually.
- IP Address
- Subnet Mask
- Default Gateway
- DNS Server
12
●Default password is 00000000.
To change this password, open 85 Key...

Setting Your  Machine
5
8Enter the IP Address, and then
select OK.
Ex: 192.168.1.111
If DHCP Default is set to Ye s,
change the setting to No, and
then select OK.
6
12
●When entering a 1 or 2-digit number segment,
add 00 or 0 in front of the number to scroll
to the next segment of numbers, or press the
 
  key on the Control Panel to enter a
period after the number.
●To correct a mistake, press  or  to
move the cursor to the right side of the
incorrect address.
To delete, press Clear, and re-enter the...

6
11Select Ye s to use DNS Server,
and then select OK.
9
Enter the Subnet Mask, and then
select OK.
Ex: 255.255.255.1
12
●When entering a 1 or 2-digit number segment,
add 00 or 0 in front of the number to scroll
to the next segment of numbers, or press the
 
  key on the Control Panel to enter a
period after the number.
●To correct a mistake, press  or  to
move the cursor to the right side of the
incorrect address.
To delete, press Clear, and re-enter the
correct address.
10
Enter the Gateway Address,...

Setting Your  Machine
7
13Press the Reset key.
14Turn the Power Switch OFF, and
then back ON again.
● ●● ●
●The Power Switch is on the left side of the
machine.
12
Select Domain Name to enter a domain
name using the 
Keyboard, and then select
OK. (Up to 50 characters)
Select Add to add a DNS server
address(es) using the Keypad.
(3 digits X 4)
Enter the Host Name, Domain
Name, and DNS Server Address,
and then select OK.
Select Host Name to enter a host name
using the Keyboard, and then select OK.
(Up to...

8
Installation
 : IBM PC/AT, and compatibles (CPU
Pentium II or greater is required,
Pentium 4 or greater is
recommended)
 : 800x600 Pixel or greater
(recommended), and a 16-bit High
Color video adapter or greater
(True Color is recommended)
 : Windows 98*
1, Windows Me *2,
Windows NT 4.0*3 (With Service
Pack 3 or later is required),
Windows 2000*
4, Windows  XP*5,
Windows Server 2003*6
 : The minimum recommended
Memory for each OS is as follows:
Windows 98, Windows Me: 128 MB
or greater
Windows 2000,...

Installation
9
1Insert the Panasonic Document
Management System CD-ROM.
The Panasonic opening screen is
displayed.
2Click Language if necessary.
●If the CD-ROM does not launch automatically,
double click My Computer on the Desktop,
or on the Start menu, and then double click
the CD-ROM icon.
●Screen Language will automatically default
to the language used by your PC.
   If you want to change the language, click
Language, and then select the preferred
language, and click OK.
■ ■■ ■
■Installing the Printer...

10
6
5 4The InstallShield Wizard screen is
displayed.
Select I accept the terms of the
license agreement, and then
click Next.
7
Click Next.
Click Next.
Installation
Installing the Printer Driver, and Application Software
■ ■■ ■
■Installing the Printer Driver (Network Port Connection), and the Panasonic
Document Management System
●The above Screen will not be shown if there
is another models Panasonic Document
Management System installed.
●If you wish to change the folder, click
Browse, and then the...