Panasonic Digital Imaging System Dp 1810f Copier Operating Instructions

31
NOTE
 No.ModesInitial
Setting Function
Function
Copier Settings for Key Operator
ORIGINAL (HOME)
Selects contrast for Text/Photo mode
C1 ~ 5 T/P CONTRAST 3
PHOTO CONTRAST Selects contrast for Photo mode
C1 ~ 5T/P
(
Text/Photo) Selects original setting
CTEXT, T/P (Text/Photo), PHOTO
3 Selects contrast for Text mode
C1 ~ 5 TEXT CONTRAST
3
MAX. COPY SETTING Determines whether to limit number of copies
C1 ~ 999999 01
02
03
04
10
Input a size in memory 2 for frequent usage
size.
CX: 5~432/Y: 5~297 mm
(See...

32
Function Setting

 

 


Changing the Auto Exposure Setting
You can select whether the copying density is adjusted automatically for text and photographic
originals.
1
FUNCTION Key
2#Press the 2 key to select COPIER SETTINGS.
$Press the SET key.
%Press 8 and SET key to select AUTO
EXPOSURE MODE.
&Press 1 or 2 key to select whether Auto
Exposure is to be carried out or not.
(Press the SET key to set up the AUTO
EXPOSURE MODE.
)Press the RESET key to exit the Function mode.
Function
Proceed as Follows:...

33
Function Setting for Key Operator

 

 


Changing the Paper Size
The Paper Trays are designed to accommodate Invoice, Letter, Letter R, Legal and Ledger size
paper. To change the paper size, perform the steps shown below.
1
FUNCTION Key
2
Proceed as Follows:
#Press the 1 key to select GENERAL
FUNCTIONS.
$Press the SET key.
%Press 9 key.
&Input the Key Operator ID code (3 digit)
and the SET key.(Press 00 and 1 or 2 key to select
the PAPER SIZE.
)Press SET to select the paper tray and
press (G or F)...

34
NOTE
Function
Changing the Paper Guide and Paper Size Indicator in the Paper Tray
#Pull the Paper Tray out and remove
paper.
$Adjust the paper guide a to the
required paper length.
%Adjust the Paper Guide b to the
required paper width.
Pinch the stopper to move the Paper
Guide b.
&Change the Paper Size Indicator.
Paper
Guide 
a aa a
a
Stopper
Paper
Guide 
b bb b
b
Size
Indicator
(Close the Paper Tray.
3
CIt is recommended that the paper guide b be fixed in place with screws.
Consult an authorized...

35

 

 


Department Counter
The Key Operator can manage, limit copies, counters and code numbers for each department.
(Maximum department counters: 50)
1
FUNCTION Key
2
Proceed as Follows:
#Press the 1 key to select GENERAL
FUNCTIONS.
$Press the SET key.
%Press 9 key.&Press the Key Operator ID code (3 digit)
and SET key.
(Press 14 and the SET key to select
DEPT. COUNTER MODE.
NOTECTo reset the function mode, press the RESET key.
C
Contact your authorized servicing dealer to enable the Department...

36
Change the Department ID Code, limit the maximum number of copies
and Department Counter number.
#Press the Keypad and the SET key to input the
Department ID Code.
01: 1234 Department ID Code
Department No.
$Press the Keypad and the SET key to input the
maximun number of copies.
01: 123456
      Maximun number of copies (6 digits)
Department No.
%Press the Keypad and the SET key (G or F keys) to
select the Department No.
01: 123456 Counter (6 digits)
Department No.
&Press 0 and the SET key (Input “0”)...

37
Accessories
Components
Image Memory
(DA-SM8B/SM16B/SM64B/SM28B)
C8/16/64/128 MB
CTo increase the memory capacity for
electronic sorting and sort printing.
2nd/4th Paper Feed Module
(DA-DS182)
CTo increase the paper feed
sources and capacity.
Paper Feed Module × 1
(550 sheets)
∗PCL6 is a Page Description Language of the Hewlett-Packard Company.NOTE
PCL6 Emulation Kit
(DA-PC210)
CPrinter Controller for PCL6
*
10/100 Ethernet Interface/
Internet Fax Kit
(DA-NE200)
CNetwork Interface Board
Options
3rd...

38

 

 


550-Sheet Paper Tray
Problem Solving
1
Pull the Paper Tray out.
2
Place the paper with the copying
surface facing upward.
Special papers, like glossy paper, mailing
labels and transparencies cannot be used
in the paper tray.
Use the Sheet Bypass for special paper.
3
Make sure paper is not loaded
above the overfill indicator located
in the Paper Tray.
Adding Paper (
J JJ J
J)
ATTENTIONCDo not use paper with folds or wrinkles.
Refer to page 34 for details on adjusting the paper tray size....

39
Adding the Toner and Replacing Toner Waste Container (
? ?? ?
?)
1
Open the Front Cover.
2
Remove the Toner Waste Container by
slowly pulling it towards the left as
illustrated.
3
Seal the container with the enclosed
cap and dispose of it properly.
4
#Turn the empty Toner Bottle
counter-clockwise until it stops. The
Arrow mark (Unlocked symbol    )
visible on the end of the Toner
Bottle is aligned with the Arrow
mark on the machine.
Note: To prevent toner spill, ensure
that the key is facing upwards...

40
5
#Shake the new Toner Bottle four
or five times to loosen the
contents.
$Remove the cap from the Toner
Bottle.
6
#Align the Key of the bottle, also
represented by the Arrow mark
(Unlocked symbol    ) visible on
the end of the Toner Bottle with
the Arrow mark on the machine.
Note: To prevent toner spill,
ensure that the key is facing
upwards before installing the
bottle.
$Inser t the bottle as far as it will
go, then turn it clockwise (160°,
approx. 1/2 turn) until it locks
(Locked symbol ).
Note: If...