Panasonic Digital Imaging System Dp 1810f Copier Operating Instructions

							31
NOTE
 No.ModesInitial
Setting Function
Function
Copier Settings for Key Operator
ORIGINAL (HOME)
Selects contrast for Text/Photo mode
C1 ~ 5 T/P CONTRAST 3
PHOTO CONTRAST Selects contrast for Photo mode
C1 ~ 5T/P
(
Text/Photo) Selects original setting
CTEXT, T/P (Text/Photo), PHOTO
3 Selects contrast for Text mode
C1 ~ 5 TEXT CONTRAST
3
MAX. COPY SETTING Determines whether to limit number of copies
C1 ~ 999999 01
02
03
04
10
Input a size in memory 2 for frequent usage
size.
CX: 5~432/Y: 5~297 mm
(See page 25) M2, SIZE95×220 mm(X) (Y)
70×160 mm(X) (Y)Input a size in memory 1 for frequent usage
size.
CX: 5~432/Y: 5~297 mm
(See page 25) M1, SIZE
16 MEM. FULL ACTION Selects the memory full action
CPRINT, CANCELPrint 12
13
CIt is necessary to input the Key Operator ID code before changing items on
this page.
Making Copies 
						

							32
Function Setting

 

 


Changing the Auto Exposure Setting
You can select whether the copying density is adjusted automatically for text and photographic
originals.
1
FUNCTION Key
2#Press the 2 key to select COPIER SETTINGS.
$Press the SET key.
%Press 8 and SET key to select AUTO
EXPOSURE MODE.
&Press 1 or 2 key to select whether Auto
Exposure is to be carried out or not.
(Press the SET key to set up the AUTO
EXPOSURE MODE.
)Press the RESET key to exit the Function mode.
Function
Proceed as Follows:
FUNCTION MODE  (1-2)
ENTER NO. OR ∨ ∧
COPIER PARAM. (00-14)
ENTER NO. OR ∨ ∧
2:COPIER SETTINGS
PRESS SET TO SELECT
08 AUTO EXPOSURE
 2:VALID
Press the FUNCTION key. 
						

							33
Function Setting for Key Operator

 

 


Changing the Paper Size
The Paper Trays are designed to accommodate Invoice, Letter, Letter R, Legal and Ledger size
paper. To change the paper size, perform the steps shown below.
1
FUNCTION Key
2
Proceed as Follows:
#Press the 1 key to select GENERAL
FUNCTIONS.
$Press the SET key.
%Press 9 key.
&Input the Key Operator ID code (3 digit)
and the SET key.(Press 00 and 1 or 2 key to select
the PAPER SIZE.
)Press SET to select the paper tray and
press (G or F) keys to set the paper
size.
Paper size changes are as follows.
Letter R Invoice R
Ledger Legal
*Press the SET key to set up the PAPER
SIZE.
+Press the RESET key to exit the Function
mode.
Function
FUNCTION MODE  (1-2)
ENTER NO. OR ∨ ∧
1:GENERAL FUNCTIONS
PRESS SET TO SELECT
GENERAL PARAM. (0-9)
ENTER NO. OR ∨ ∧
09 KEY OPERATOR MODE
ENTER PASSWORD=_ 
 

KEY OPR. MODE (00-25)
ENTER NO. OR ∨ ∧
00 PAPER SIZE
 1:TRAY-1[LTR
B]
LetterA3 B4 A4
A4R
B5
FLS2 FLS1 A5R B5R
Making Copies
Press the FUNCTION key. 
						

							34
NOTE
Function
Changing the Paper Guide and Paper Size Indicator in the Paper Tray
#Pull the Paper Tray out and remove
paper.
$Adjust the paper guide a to the
required paper length.
%Adjust the Paper Guide b to the
required paper width.
Pinch the stopper to move the Paper
Guide b.
&Change the Paper Size Indicator.
Paper
Guide 
a aa a
a
Stopper
Paper
Guide 
b bb b
b
Size
Indicator
(Close the Paper Tray.
3
CIt is recommended that the paper guide b be fixed in place with screws.
Consult an authorized servicing dealer for details on how to fasten with
screws.
Function Setting for Key Operator 
						

							35

 

 


Department Counter
The Key Operator can manage, limit copies, counters and code numbers for each department.
(Maximum department counters: 50)
1
FUNCTION Key
2
Proceed as Follows:
#Press the 1 key to select GENERAL
FUNCTIONS.
$Press the SET key.
%Press 9 key.&Press the Key Operator ID code (3 digit)
and SET key.
(Press 14 and the SET key to select
DEPT. COUNTER MODE.
NOTECTo reset the function mode, press the RESET key.
C
Contact your authorized servicing dealer to enable the Department Counter
feature.
Function
FUNCTION MODE  (1-2)
ENTER NO. OR ∨ ∧
1:GENERAL FUNCTIONS
PRESS SET TO SELECT
GENERAL PARAM. (0-9)
ENTER NO. OR ∨ ∧
09 KEY OPERATOR MODE
ENTER PASSWORD=_ 
 

KEY OPR. MODE (00-25)
ENTER NO. OR ∨ ∧
Making Copies
Continued on the next page...
Press the FUNCTION key. 
						

							36
Change the Department ID Code, limit the maximum number of copies
and Department Counter number.
#Press the Keypad and the SET key to input the
Department ID Code.
01: 1234 Department ID Code
Department No.
$Press the Keypad and the SET key to input the
maximun number of copies.
01: 123456
      Maximun number of copies (6 digits)
Department No.
%Press the Keypad and the SET key (G or F keys) to
select the Department No.
01: 123456 Counter (6 digits)
Department No.
&Press 0 and the SET key (Input “0”) to clear the counter.
DEPT.COUNTER MODE
 1:TOTAL COUNTER
3
Select the Department Counter Mode.
Press 2 and the SET key.
NOTE
Function
CTo reset the function mode, press the RESET key.
DEPT. CODE (01-50)
ENTER NO. OR ∨ ∧
DEPT.COUNTER
 01:123456
MAX COPIES
 01:123456
I.D CODE
 01:1234
4
Function Setting for Key Operator 
						

							37
Accessories
Components
Image Memory
(DA-SM8B/SM16B/SM64B/SM28B)
C8/16/64/128 MB
CTo increase the memory capacity for
electronic sorting and sort printing.
2nd/4th Paper Feed Module
(DA-DS182)
CTo increase the paper feed
sources and capacity.
Paper Feed Module × 1
(550 sheets)
∗PCL6 is a Page Description Language of the Hewlett-Packard Company.NOTE
PCL6 Emulation Kit
(DA-PC210)
CPrinter Controller for PCL6
*
10/100 Ethernet Interface/
Internet Fax Kit
(DA-NE200)
CNetwork Interface Board
Options
3rd Paper Feed Module
(DA-DS183)
CTo increase the paper feed
sources and capacity.
Paper Feed Module × 1
(550 sheets) 
						

							38

 

 


550-Sheet Paper Tray
Problem Solving
1
Pull the Paper Tray out.
2
Place the paper with the copying
surface facing upward.
Special papers, like glossy paper, mailing
labels and transparencies cannot be used
in the paper tray.
Use the Sheet Bypass for special paper.
3
Make sure paper is not loaded
above the overfill indicator located
in the Paper Tray.
Adding Paper (
J JJ J
J)
ATTENTIONCDo not use paper with folds or wrinkles.
Refer to page 34 for details on adjusting the paper tray size.
CUnused paper should always be placed into a bag and the opening should be sealed
for storage.
If the paper is left exposed, problems such as paper curl, paper jams, wrinkles or
loss of copied image quality may occur.
4
Firmly push the Paper Tray back
into the copier. 
						

							39
Adding the Toner and Replacing Toner Waste Container (
? ?? ?
?)
1
Open the Front Cover.
2
Remove the Toner Waste Container by
slowly pulling it towards the left as
illustrated.
3
Seal the container with the enclosed
cap and dispose of it properly.
4
#Turn the empty Toner Bottle
counter-clockwise until it stops. The
Arrow mark (Unlocked symbol    )
visible on the end of the Toner
Bottle is aligned with the Arrow
mark on the machine.
Note: To prevent toner spill, ensure
that the key is facing upwards
before removing the toner bottle.
$Pull the empty Toner Bottle out.
Note: If the bottle will not pull out from
the machine, turn the bottle
slightly in either direction to
release the key and try it again.
Cap
Problem Solving/U13
CFor optimum copy quality use the recommended Panasonic toner. Store toner in a cool
dark place. Do not unseal toner before use. Use it as fast as possible after unsealing.
CWhen U13 is displayed the Add Toner Warning Indicator will begin to flash. This message
is to prompt you that the toner bottle is nearly empty (approx. 300-sheets can be printed).
This message will continue to be displayed until the bottle is replaced.  When the count-
down counter reaches 0, the copier will stop operating.  To clear the message and enable
the copier to operate, replace the empty toner bottle with a new one.ATTENTION
?
J
2
1 
						

							40
5
#Shake the new Toner Bottle four
or five times to loosen the
contents.
$Remove the cap from the Toner
Bottle.
6
#Align the Key of the bottle, also
represented by the Arrow mark
(Unlocked symbol    ) visible on
the end of the Toner Bottle with
the Arrow mark on the machine.
Note: To prevent toner spill,
ensure that the key is facing
upwards before installing the
bottle.
$Inser t the bottle as far as it will
go, then turn it clockwise (160°,
approx. 1/2 turn) until it locks
(Locked symbol ).
Note: If the bottle is not inserted
all the way into the machine
as illustrated, turn the bottle
slightly in either direction to
engage the key and try it
again.
7
Install a new Toner Waste
Container.
8
Close the Front Cover.
Problem Solving
CDo not reuse the toner from the Toner Waste Container.
1 2
ATTENTION
Adding the Toner and Replacing Toner Waste Container (
? ?? ?
?)
1
22-1
2-22-3
IncorrectCorrect