Panasonic Digital Imaging System Dp 1810f Copier Operating Instructions

							11
65 4
32 -. /
1 0
=
;
Control Panel
No Contents Refer to
4INTERRUPT Key, MEMORY IN Key, M1/M2 Keys
CInterrupt Key interrupts other copy or print jobs while making copies.
CMemory In Key registers two copy jobs for recall at a later time.
C
M1/M2 Keys are used to store a Job in Memory or to recall a Job stored in Memory.
Pages 21, 23
5Cursor Keys
C CC C
CSelect copy ratio and function modes using (G or F).
——
6PAPER TRAY  Key
C CC C
CUsed to select the paper tray manually.
——
7COPY SIZE Key
C
Used to select Reduction/Enlargement only. For additional details, see page 13.——
8ORIGINAL SIZE Key
C
Used to select the original size manually. For additional details, see page 13.——
9PRINT Key
C CC C
CWhen selecting the Printer ON/OFF Line.
——
NOTECThe Control Panel displayed above shows only copier functions. Please refer
to the appropriate operating instructions for the control panel functions or in
the Panasonic Doccument Management System CD-ROM for the Printer
control panel functions.
∗When the machine detects a problem or an alarm status is activated, the ;
Alarm LED lights up or begins to flash.
LED Lights: Machine detected a trouble status
CNo paper in the selected tray or toner has run out.
CMachine detected trouble, such as paper misfeed or jam.
LED Flashes: Machine detected an alarm status
CNo paper in the tray. (Tray not selected)
CRunning low on toner, etc.
Before Starting
:COPY Key
C CC C
CPress when using the unit as a photocopier.
——
JAdd Paper
?Add Toner
IMisfeed
2Call Service Warning Indicators LCD Display
;Alarm LED (Red)
C CC C
CLights when trouble occurs.*——
=Active LED (Green)
C CC C
CLights when machine is active.
—— 
						

							12
Basic Copy
Full Size Copying

 

 


Copying the Same Size Originals (1:1)
Copy size is automatically selected.
1
Place the Original
LCD Display (Sample) ORIGINAL SIZE Key
Select the Original Size on units
without the ADF.
NOTE
CLEAR Key
2
Number of Copies*
Up to 999
3
Press START**
#Select the Original Type
PHOTO : Originals are mainly composed of photo.
TEXT/PHOTO : Combined originals with text and photo.
TEXT : Originals are mainly composed of text.
$Select Exposure Control
Press the DARKER/LIGHTER keys to adjust the exposure.

 

 


Manually Selecting Exposure Control or Original Type
∗Use Clear key when canceling the copy count.
∗∗While the copier is warming up, you may position your original on the copier, enter
your copy job selections and press the Start key. The COPY JOB RESERVED
indicator displays until the warm up cycle is completed and the copy job is
automatically start.
READY TO COPY
        COPIES:001 
						

							13
NOTE
Making Copies

 

 


Copying with Preset Ratios
Basic Copy
100 77 65 50
121 100 79 61
129 100 100 65
200 155 129 100
Reduction or Enlargement Copying
LDR ->LTRB  [LTRB ]
ZOOM: 65% COPIES:001
RESET
1
Place the
Original
2
Select the
ORIGINAL SIZE
3
Select the COPY
SIZE
4
Number of
Copies
CIf the desired copy size is different from the paper size loaded in the paper
tray, use the sheet bypass. (See page 17)
CPress the RESET key to cancel all job settings.
5
Example: Reduction
Original size Copy size
LEDGERLETTER
The correct ratio is automatically selected.
Reduction and enlargement ratios (%)
Original
SizeCopy Size
Ledger LegalLetter Invoice
Ledger
Legal
Letter
Invoice
CWhen changing the paper tray, press the
Paper Tray key. 
						

							14

 

 


ADF
1. Features
#Automatic Original Feeding
CThe ADF tray can hold up to 50 Letter size originals of 20 lb (80 g/m2) paper (up to 30 Legal or
Ledger size originals). Accommodates from Invoice to Ledger size originals.
CAutomatic original size detection.
$2 in 1 Copy
CTo make a 1-Sided copy (full size or reduction), from two 1-Sided originals side-by-side.
Basic Copy
2. Components
Original Guides
Adjust to the original’s widthADF Tray
Automatic Document Feeder
CSet the originals up to the upper limit arrow. 
						

							15
Automatic Document Feeder
3. Operation

Operation Procedure
ADF
Face-Up
1
Place the
Original
2
Number of
Copies
3
Press
START
Inappropriate Originals
CPaper with a smooth surface such as glossy
and coated papers
CTransparencies
COriginals with a lead edge that is “creased”,
“folded”, “punched” or “glued”
Basic Copy
CPaste-ups
CPressure sensitive or carbon backed papers
CPaper with excessive curl
CStapled originals
CFreshly printed copies from a laser printer
NOTECTo copy these kinds of originals, use the Platen Glass instead.
Making Copies 
						

							16
NOTE
ATTENTION

 

 


Zoom
Copies with variable zoom ratios from 50% to 200% in 1% increments.
LTR  ->LTRB  [LTRB ]
ZOOM:125% COPIES:001B
RESET
Zoom Copying Basic Copy
(Example: 125% Zoom)
1
Place the
Original
2
Press Cursor (G or F)
keys to select Zoom Ratio
4
Number
of Copies
5
Press
START
CWhen changing the paper size after setting the zoom ratio, please use the paper
tray key.
CPress the RESET key to cancel all job settings.
3
Select ORIGINAL
SIZE
(without using ADF) 
						

							17
NOTE
ATTENTION
Sheet
Bypass
#Place the sheets of paper into
the tray. (approximately up to
50 Letter size sheets/20 lb)
Basic Copy
Using the Sheet Bypass

 

 


Copying on Special Paper, etc.
1
Place the original.
Open the sheet bypass.
2
Pull out the sheet bypass tray
until it stops.
(For Ledger size only)
3
Insert the paper until it stops.
$Adjust the side guides.
Incorrect adjustment may cause the
paper to wrinkle, misfeed or skew.
Press START.
Side Guides
CAdjust the side guides properly to avoid skewing, wrinkling or misfeeding. CDo not feed curled paper through the sheet bypass to avoid misfeed.Do not fill above.
Making Copies 
						

							18
2 in 1 Copy

2 in 1 Copy
From two 1-Sided originals, side by
side, to 1-Sided pages.
Creative Features
1 \ 2 (Layout)*
2 \ 1 (Layout)*
Portrait (Orientation)*
Landscape (Orientation)*
1 \ 2 (Layout)*
2 \ 1 (Layout)*
4
Number of
Copies

 

 


Procedure
ADF
Face-Up
1
Place the
Originals
2
Press 2
in 1 key
(3)
COPY SIZE
(Reduction/
Enlargement
Only)
5
Press
START
CPress the RESET key to cancel all job settings.
CNumbers in parenthesis “ ( ) ” represent that, an additional step is required to activate
the feature.
∗The Orientation and Layout can be set in the Copier Settings function mode.
(See page 29)
NOTE 
						

							19
NOTECTo reset all job settings, press the RESET key.
3
ORIGINAL SIZE
(Letter or Ledger
size Only)
4
Number of
Copies
5
Press
START
PlatenLedger size original
LetterBook Mark

2 PAGE COPY
Copying two facing pages on a ledger size original
on two separate Letter size sheets.

 

 


Procedure
1
Place the
Originals
2
Press the 2
PAGE COPY
key
2 PAGE COPYCreative Features
Making Copies
Center book
by length
and width
according
to center
marks. 
						

							20
NOTE
BOOK/EDGE/MARGIN Creative Features

BOOK Key
Eliminates dark inner binding shadows when copying from a book.

EDGE Key
Creates a blank edge.

MARGIN Key
Shifts the image to the right or left.

 

 


Procedure
∗Initial setting (Factory setting) can be changed in the Copier Settings function mode.
(See page 29)
∗∗If a part of the copied image is missing when using the Margin mode, change the
Frame Reduction setting to ON.
(See page 29)
CPress the RESET key to cancel all job settings. Book
∗Initial Book Margin setting (Factory setting): 20 mm
∗Initial Equal Rate setting (Factory setting): 5 mm
∗Initial Left Margin setting (Factory setting): 10 mm Edge
Margin
**
1
Place the
Original
2
Press BOOK, EDGE
or MARGIN key
5
Press
START
4
Number
of Copies
BOOK MARGIN
CENTER VOID = 20mm∨∧
EQUAL RATE
VOID MARGIN = 5mm∧
LEFT MARGIN
              10mm∨∧
3
Press Cursor (G or F) keys to adjust
the void width while the button is
blinking. (approx. 5 sec.)
CVoid/Margin width: 5-99 mm