Panasonic Digital Imaging Systems Dp 1810p Copier Operating Instructions

11
For DP-1810P
Control Panel
LCD Display
Warning Indications
JAdd Paper
?Add Toner
IMisfeed
2Call Service
No Contents Refer to
2STOP KeyCStops the copy run.——
3START KeyCUsed to start an operation.——
4INTERRUPT Key, MEMORY IN Key, M1/M2 Keys
CInterrupt Key interrupts other copy or print jobs while making copies.
CMemory In Key registers two copy jobs for recall at a later time.
C
M1/M2 Keys are used to store a Job in Memory or to recall a Job stores in Memory.
Pages 22, 24
5Cursor Keys
C CC C
CSelect...

12
Basic Copy
Full Size Copying

 

 


Copying the Same Size Originals (1:1)
Copy size is automatically selected.
1
Place the Original
LCD Display (Sample)ORIGINAL SIZE Key
Select the Original Size on units
without the ADF/i-ADF Option.
NOTE
CLEAR Key
2
Number of Copies*
Up to 999
3
Press START**
#Select the Original Type
PHOTO : Originals are mainly composed of photo.
TEXT/PHOTO : Combined originals with text and photo.
TEXT : Originals are mainly composed of text.
$Select Exposure Control
Press the...

13

 

 


Copying with Preset Ratios
Basic Copy
100 77 65 50
121 100 79 61
129 100 100 65
200 155 129 100
Reduction or Enlargement Copying
LDR ->LTRB  [LTRB ]
ZOOM: 65% COPIES:001
RESET
Making Copies
1
Place the
Original
2
Select the
ORIGINAL SIZE
3
Select the COPY
SIZE
4
Number of
Copies
CIf the desired copy size is different from the paper size loaded in the paper
tray, use the sheet bypass. (See page 15)
CPress the RESET key to cancel all job settings.
5
Press
START
Example: Reduction
Original size...

14
NOTE
ATTENTION

 

 


Zoom
Copies with variable zoom ratios from 50 % to 200 % in 1 % increments.
LTR  ->LTRB  [LTRB ]
ZOOM:125% COPIES:001B
RESET
Zoom Copying Basic Copy
(Example: 125 % Zoom)
1
Place the
Original
2
Press Cursor (G or F)
keys to select Zoom Ratio
4
Number
of Copies
5
Press
START
CWhen changing the paper size after setting the zoom ratio, please use the paper tray
key.
CPress the RESET key to cancel all job settings.
3
Select ORIGINAL
SIZE
(without using
ADF/i-ADF) 

15
NOTE
ATTENTION
Sheet
Bypass
#Place the sheets of paper into
the tray. (approximately up to
50 Letter size sheets/20 lb)
Basic Copy
Using the Sheet Bypass

 

 


Copying on Special Paper, etc.
1
Place the original.
Open the sheet bypass.
2
Pull out the sheet bypass tray
until it stops.
(For Ledger size only)
3
Insert the paper until it stops.
$Adjust the side guides.
Incorrect adjustment may cause the
paper to wrinkle, misfeed or skew.
Press START.
Side Guides
CAdjust the side guides properly to avoid...

16
2 in 1 Copy

2 in 1 Copy
From two 1-Sided originals, side by side, to 1-Sided pages.
Creative Features
1 \ 2 (Layout)*
2 \ 1 (Layout)*
Portrait (Orientation)*
Landscape (Orientation)*
1 \ 2 (Layout)*
2 \ 1 (Layout)*
4
Number of
Copies

 

 


Procedure
ADF/i-ADF
Face-Up
1
Place the
Originals
2
Press 2
in 1 key
(3)
COPY SIZE
(Reduction/
Enlargement
Only)
5
Press
START
CThe ADF/i-ADF is required for 2 in 1 copy.
CPress the RESET key to cancel all job settings.
CNumbers in parenthesis “ ( ) ” represent...

17
NOTECTo reset all job settings, press the RESET key.
3
ORIGINAL SIZE
(Letter or Ledger
size Only)
4
Number of
Copies
5
Press
START
PlatenLedger size original
LetterBook Mark

2 PAGE Copy
Copying two facing pages on a ledger size original on two separate Letter size sheets.

 

 


Procedure
1
Place the
Originals
2
Press the 2
PAGE COPY
key
2 PAGE COPYCreative Features
Making Copies
Center book
by length
and width
according
to center
marks. 

18
NOTE
BOOK/EDGE/MARGIN Creative Features

BOOK Key
Eliminates dark inner binding shadows when copying from a book.

EDGE Key
Creates a blank edge.

MARGIN Key
Shifts the image to the right or left.

 

 


Procedure
∗Initial setting (Factory setting) can be changed in the Copier Settings function mode.
(See page 30)
∗∗If a part of the copied image is missing when using the Margin mode, change the
Frame Reduction setting to ON.
(See page 30)
CPress the RESET key to cancel all job settings. Book
∗Initial...

19
2-Sided/1-Sided Copy (For DP-2010E)Creative Features

 

 


Key Operation
Press 2-Sided/1-Sided Copy key (circulation) to select a 2-Sided/1-Sided Copy function.
1 \ 2From 1-Sided originals to 2-Sided
copies.(See page 20)
2 \ 2From 2-Sided originals to 2-Sided
copies.(See page 20)
Book \ 2From book originals to 2-Sided copies. (See page 21)
2 \ 1From 2-Sided originals to 1-Sided
copies.(See page 20)
NOTE
2-Sided/1-Sided Copy key
C2-Sided originals may be handled either manually or automatically using...

20
1 
\ \\ \
\ 2  /  2 
\ \\ \
\1  /  2 
\ \\ \
\ 2 Copy (For DP-2010E)

1 
\ \\ \
\ 2 Copy
From 1-Sided originals to
2-Sided copies.
(From Copier Platen & i-ADF/
ADF)
2 
\ \\ \
\ 1 Copy
From 2-Sided originals to
1-Sided copies.
(Using i-ADF)
Creative Features
NOTE

2 
\ \\ \
\ 2 Copy
From 2-Sided originals to
2-Sided copies.
(Using i-ADF)
Long Edge (Binding)*Long Edge (Binding)*Long Edge (Binding)
Short Edge (Binding)
*Short Edge (Binding)*Short Edge (Binding)

 

 


Procedure
i-ADF
Face-Up
1
Place...