Panasonic Digital Imaging Systems DP-3520/4520/6020 Operating Instructions

							11
Getting To Know
Your Machine
Reduction/Enlargement only
(See page 32) Select desired settings
Number of Copies
(Max. 999)
Adjust the Manual Exposure
                     or
Select type of Original(s)
Mainly TextText and Photo
combinedMainly Photo
Copy Jobs
(See pages 30-37) (See pages 38-43) (See pages 44 and 45)
(See pages 46-51) (See pages 52-55) (See pages 54 and 55)
■ Problem Solving
Adding Paper
(See pages 10 and 12)
Replacing Toner Bottle
(See page 12)
Replacing Toner Waste
Container
(Call your Service provider)Replacing Staple
Cartridge
(See pages 14-17)
●When the optional
Finisher is
installed. Removing a Misfed
Paper
(See pages 16-25)
User Error Code
(See page 17)
Machine Error Code
(Call your Service provider)
COPY
SIZE
UXX
EXX
345
ex: DA-FS330 
						

							12
Getting To Know Your Machine
Hopper
2
1Toner Bottle
Toner Hopper
Face-Up
Paper Feed Tray
2
1
Max Level Indicator
Operation Chart
■ Problem Solving
● Adding Paper (3000-Sheet Large Capacity Paper Tray (LCT) (Option))
● Adding Paper (1550-Sheet Paper Tray 1)
Do not touch the tray while
it is moving.
12
12
Paper Weight: 16-24 lb
3
Paper Capacity: 1550 Sheets (20 lb)
● Replacing Toner Bottle/Replacing Toner Waste Container
12
6
After tray stops, place paper neatly on
the tray. Letter∗
 size only (Portrait).
∗Letter-R/Legal size is available when
optional Letter-R/Legal Size LCT
Adapter  (DA-TK31) is installed.•When using  paper with
one side already printed,
load the paper with the
unprinted side facing
upward.
Replace Toner Bottle
Replace Toner Waste
Container
(Call your Service provider)
Toner Hopper7 
						

							13
Getting To Know
Your Machine
2Empty Toner Bottle
1
New Toner Bottle
10 to 15 times
Cap
Overfill Indicator
Paper Capacity: 3000 Sheets (20 lb)
4
34
(ATTENTION)
●For optimum copy quality it is recommended that
only Panasonic Brand toner is used in the copier.
Store toner in a cool dark area with low humidity.
Do not unseal the toner bottle unless you are
ready to use it.
345
6
8
Shake the new Toner Bottle
well to loosen the contents. 
						

							14
Getting To Know Your Machine
Staple Cartridge
Staple Cover
Stapler Cover
2
1
Lock Lever
Stapler Unit
Stapler Cover
Operation Chart
■ Problem Solving (Common operation)
● 2-Bin Finisher (DA-FS330)
● Replacing the Staple Cartridge (Common operation) (When optional Finisher is installed.)
1
DA-FS3301
Replace the Staples Case
as following procedures.
For 1-Bin Saddle-Stitch
Finisher (DA-FS355A)
(See page 16)
● 2-Bin Finisher (DA-FS600)/2 Bin Saddle-Stich Finisher (DA-FS605)
orAdd Staples
DA-FS355A/FS600/FS605
23
897
123
    When supplying the Saddle Sticher Unit with staples (DA-FS605 only)
Lower Front
CoverGreen Handle
Stitcher Unit
123 
						

							15
Getting To Know
Your Machine
Staple CartridgeEmpty
New2
1
TapeNew
Empty21
Tape
Empty
2
1
New
Staple Cartridge
Number of Copies
(Max. 999)
34Check the
operation2
456
7
10
456
456
7
Close the
Staple Cover.
When the Staple is jammed
●The following message will
be displayed on the Touch
Panel Display:
Can Not Complete
Confirm Staple UnitFor DA-FS330: For DA-FS600/FS605:Jammed
Staple
2
1
3
Jammed
Staple21
3
Stitcher Unit
Until it
stops
Close the Lower Front Cover. 
						

							16
Getting To Know Your Machine
Stapler UnitStaple CartridgeTape
Stapler Unit
21Bule MarkFinisher Front Cover
Operation Chart
■ Problem Solving (Continued)
● 1-Bin Saddle-Stich Finisher (DA-FS355A)
● Removing a Misfed Paper (Locations)
123
897
Misfed Location Indicator
●Indicates to open each cover, check
and remove any misfed paper.
DA-FS330 DA-FS355
DA-FS355ADA-FS600 DA-FS605
AB
C D
E
F
G H
IJ
Finisher
i-ADF Copier
ADU
Paper Feed Unit
LCT
H:Finisher (See page 22)
J:i-ADF (See page 20) A:System Console (See page 20)
B:Paper Entry Area (See page 18)
C:Paper Transport Area (See page 18)
D:Paper Exit/Fuser Area (See page 18)
E:ADU Area (See page 20)
F:Reverse Area (See page 18)
G:LCT Large Capacity Paper Tray Area (See page 22) 
						

							17
Getting To Know
Your Machine
Finisher Front Cover
New Staple CaseEmpty Staple Case
Staple Cartridge
● User Error Codes (U Code)
456
7
10When the Staple is jammed
●The following message will
be displayed on the Touch
Panel Display:
Can Not Complete
Confirm Staple Unit
U1 Front Cover is open. U18Code Check Points
Code
U4 Finisher is pull out.
U20
U6 Right Cover is open.
U21
U7 Right Cover Lower is open.
U30
Total Copy Count is limit, consult your Key Operator.
Check Points
ADF is open.
ADF is opened while scanning from ADF.
Punch Dust Cover is open.
U9 Left Cover is open.
U31
Paper is remained in the Saddle-Stitcher Unit.
U12Finisher Staple Cover/Upper Cover is open.
Trash Box is not installed. (DA-FS330)U32
Finsher  Infeed/Inner Cover is open. (DA-FS605/FS355)
U13 Low Toner.U33
Stapler of Saddle Stitcher Unit is incorrectly (DA-FS605/FS355)
U15 Call your Service provider.U34
Finisher Lower Front Cover is open. (DA-FS605)
U16 Call your Service provider.U35
Saddle Exit Cover is open. (DA-FS605)
U90Need to replace the battery. (See page 84)
U32
U4, U12
U30
U9
U35
U31, U33, U34U1U20, U21
U6
U13
U7 
						

							18
Getting To Know Your Machine
Left Cover
Exit Cover
Magnet
Heat Roller Cover
Exit Cover
Transport Release Lever
Misfed PaperRight Cover
Operation Chart
■ Problem Solving (Continued)
● Removing a Misfed Paper (Paper Entry Area)
● Removing a Misfed Paper (Paper Transport Area)
12
12
● Removing a Misfed Paper (Paper Exit/Fuser Area)
12
67
● Removing a Misfed Paper (Reverse Area)
12 
						

							19
Getting To Know
Your Machine
Left Cover
Caution 
heated 
surface
Magnet
Heat Roller CoverFuser Knob
Push and Turn
Paper
Transport
Knob 
345
3
345
6
45
8
3
 Close the Right Cover. 
						

							20
Getting To Know Your Machine
1
2
Paper Transport Knob
Misfed PaperRight Cover Lower
Exit Guide
Misfed PaperInner Cover
ADF Cover
Automatic Duplex UnitKnob 5 (Left)
Transport Release Lever
● Removing a Misfed Paper (Automatic Duplex Unit (ADU))
12
67
■ Problem Solving (Continued)
● Removing a Misfed Paper (i-ADF)
12
67
● Removing a Misfed Paper (System Console)
12
When the optional System Console
(DA-DS601/DS602) is installed.