Panasonic Digital Imaging Systems DP-3520/4520/6020 Operating Instructions

							41
Making Copies
6
Copy Format
or
Number
of Copies
∗
N in 1 modeOriginal
directionCopy
layout
or
or
or
●Copy is automatically reduced.
       2 in 1: 65 %, 4 in 1: 50 %, 6 in 1: 38 %
       (ex. Letter to Letter- size)
Number
of Copies
Binding
positionCover mode and
Paper Tray
or
When Last Original? mes-
sage is displayed.
Ex: 2 originals
Touch NO button.
Place next original on the
platen.
3Press Start Key.
4Touch YES button.
ex. 2 in 1
or
345
35
45
Reduction/
Enlargement
only
When 2 in 1 copying with different
original size, select desired copy
size with COPY SIZE Key
(not PAPER TRAY button on the
LCD Touch Panel).
Binding positionor
4
∗ When the 2-SIDED button is touched.   
						

							42
Making Copies
2-Sided/Original  Copy
OriginalsCopiesFull Size ReductionEnlargement
Legal Legal Letter-R/Invoice Ledger
Letter-R Letter-R Letter-R/Invoice Ledger
Ledger Ledger Letter/Letter-R
—
Letter Letter Letter/Letter-R
■ Multi-Size Feeding
Use this function when copying mixed Ledger/Letter
size originals using the ADF. Original size can be
detected automatically then can be copied full size
(1:1) or same size.
Combination of Multi-Size Feeding
Reduction/
Enlargement
only
■ Job Build and SADF Mode
Special originals (like thin paper, etc.) can be fed
from the ADF Tray and copied continuously using
the Job Build and SADF  Mode.
If the Job Build and SADF buttons are not shown
on the Touch Panel display, the Job Build and
SADF Modes must be enabled in the copier
function settings, please consult with the key
operator. (See page 67)
Reduction/
Enlargement
only Place one Original
at a Time or up to 70
sheets (20 lb)
Example:To make 5 sets of sorted copies of
100 sheets of originals. (Letter size)
70
100
1
71100
1
Originals: 70 sheets 
Originals: Remaining 30 sheets 1
st and 2nd Scanned Data
are combined into one job.
5 sets of 100 sheets 
sorted copies are printed 
Place the first 70 sheets
of originals on the ADF
Tray.
NOTE●Multi-Size Feeding Function cannot be combined with another 2-sided/original  copy function.
●Job Build and SADF function cannot be combined with 2 
 1 and 2  2.
1
2
1
2
1
2 
						

							43
Making Copies
Number
of Copies
Number
of CopiesPlace the next original
within 5 sec. of last
ejected copy.
Select Sorting/Finishing settings
or
or
etc.
Place the next original within
5 sec. of last ejected copy.
(30 sheets)
If “Another Original? YES or
NO” message is displayed,
touch the “NO” button.
If “Another Original? YES or
NO” message is displayed,
touch the “NO” button.
Number of
Copies
(ex. 5)
3
4
3
456
4563 
						

							44
Making Copies
Sort/Finish
1
1
1
Sort
Staple Sort
Non-Sort
Rotate-Sort
1
1
1
Rotate-Group
3
1
2
Shift-SortShift-Group
1 1
1
3 1
2
Punch
P
P
Saddle-Stitch
■ When using Sort Mode
Multiple copy sets are sorted
automatically.Multiple copies of individual
pages are stacked in alternate
direction (rotate).
(Letter size only)
When optional Finisher is installed.
Offset stacking using electronic
sorting
●DA-FS330 (Letter/Lower Bin only)
●FS355A/FS600/FS605
(Letter, Letter-R, Legal, Ledger)When optional Finisher is installed.
Offset stacking using electronic
sorting
●DA-FS330 (Letter/Lower Bin only)
●FS355A/FS600/FS605
(Letter, Letter-R, Legal, Ledger)When optional 2-Bin Finisher
(DA-FS330)/Punch Unit (DA-
SP31/SP41) is installed.
Sort by punched sets.
(Letter/Ledger)
●DA-SP31 for DA-FS600/605
DA-SP41 for DA-FS355A Copy is stored on the Tray.
Multiple copy sets are sorted
automatically and stacked in
alternate direction (rotate).
(Letter size only)
When optional Finisher is
installed.
Sort by stapling sets.Staple Positions:
DA-FS330
Top left corner (1 position/
Lower Bin only)
(Letter size only)
DA-FS355A/FS600/FS605
(except Invoice size)
●Top left corner (1 position)
●Left (2 positions)
●Bottom left corner (1 position)When optional 1/2-Bin Saddle-
Stitch Finisher (DA-FS355A/
FS605) is installed and Booklet
mode is selected. (See page 40)
●Original Size: Invoice/Letter
only
●Maximum Originals (Images):
  DA-FS355A : 40 images
  DA-FS605   : 60 images 
						

							45
Making Copies
or
or
Sort mode
or
or
When the optional Finisher (See pages 76 and 77) is installed, this screen
will change as follows:
For DA-FS330
or
12
ADF
Platen
Staple Position
ex. Top left corner
When overflow           indicator appears on the display,
remove excess copies from the bin.
oF
oF
●Overflow
Number
of Copies
or
3
or
For DA-FS600/FS605
ororor
For DA-FS355A 
						

							46
Making Copies
Zoom/Effects
■ Zoom
Copies with variable zoom ratios from 25 %
to 400 % in 1 % increments.
25%
400%
or
■ Auto Zoom
The copy Zoom Ratio adjusts automatically to the
selected paper size.
Fit to paper length or width
Fit to paper length and widthOpening the ADF
■ Edge
Creates a blank edge.
or
■ Book
Eliminates dark inner binding shadows.
ATTENTION●If using the keypad to set the zoom ratio, press the CLEAR key first to reset the current zoom ratio.
When changing the paper size after setting the zoom ratio, use the PAPER TRAY button.
NOTE●For Auto  Zoom
An incorrect exposure may occur when there is a black line at the edge of the original or an
image which the copier interprets as a black pattern in the skyshot mode.
An incorrect position detection of the original may occur when a strong light shines onto the
glass during skyshot mode.
Platen
Letter
LedgerLedger
12
12
12
12 
						

							47
Making Copies
or Same vertical and horizon-
tal ratio
25% - 400%
or
or KeypadDifferent vertical and
horizontal ratio
25% - 400%
or
or Keypad
or
Number
of Copies
Number
of CopiesFit to paper length or
width
Fit to paper length
and width
Paper Size
(Paper Tray)
or Same vertical and horizon-
tal void value
5 - 99 mm
or
or KeypadDifferent vertical and
horizontal void value
5 - 99 mm
or
or Keypad
or
Number
of Copies
Number
of Copies5 - 99 mm
or
or Keypad
NOTE●Zoom Ratio
If using the keypad to set the zoom ratio,  press the CLEAR key first to reset the current zoom
ratio.
3
4
345
3
4
34 
						

							48
Making Copies
Zoom/Effects
■ Margin
Shifts image to right, left, up or down.
or
■ Centering
Copy image can be centered automatically on
selected paper.
Opening the ADF
■ Image Repeat
Creates continuous copy image on one sheet.
Minimum original size: 20 x 20 mm
Opening the ADF
The dotted line can be set to
“None” or “Print” by Function mode
(See page 61).
■ Inverse
Negative/Positive image can be created for
special effects.
or
NOTE●In Centering and Image Repeat mode, make copies with the ADF open.
●Remove the originals from the ADF before selecting the Centering and Image Repeat mode.
An incorrect position detection of the original may occur when a strong light shines onto the
glass during the Centering and Image Repeat mode.
Also an image which the copier interprets as a black pattern in the Centering and Image
Repeat modes.
12
12
12
12 
						

							49
Making Copies
or
Number
of Copies
or Keypad Margin area5 - 99 mm
If a part of the copied image
is missing when using the
Margin mode, change the
Margin Reduction setting to
Yes. (See page 61)
Number
of CopiesPaper Size
(Paper Tray)
Number
of CopiesPaper Size
(Paper Tray)
Number
of Copies
34
34
34
3 
						

							50
Making Copies
Zoom/Effects
■ Stamping (Page Numbering)
Page numbers can be automatically stamped
on each page.
1/8-1-
ADF only∗
■ Stamping (Date Stamp)
The date can be automatically stamped on each
page.
ADF only∗
■ Stamping (Issue Number Stamping)
An issue number can be automatically stamped
on each page.
ADF only∗
01/05/2003
001
NOTE∗When copying with the Stamping mode combined with N in 1 mode, the Stamping mode can be
used from the platen. The page numbering
format can be changed in
function mode.
Default format is -n-.
(See page 61)
12
12
12