Panasonic Digital Imaging Systems DP-3520/4520/6020 Operating Instructions

							21
Getting To Know
Your Machine
Right Cover Lower
ADF Cover
Misfed Paper
Exit Guide
Green
Labelled TabADF Tray
Push and turn
Knob 5 (Right)
Knob 5 (Centre)Automatic Duplex Unit
345
6
89
345
6
89
345 
						

							22
Getting To Know Your Machine
Infeed
Cover
Misfed Paper
Infeed
Cover
Lower Front 
Cover
Finisher
Push
Release button
Transport 
Cover
Misfed Paper
Finisher Upper Cover
Finisher
Push
Release buttonMisfed Paper
Misfed Paper
Door
Latch
Misfed Paper
● Removing a Misfed Paper (Large Capacity Paper Tray) (Option)
12
■ Problem Solving (Continued)
● Removing a Misfed Paper (2-Bin Finisher) (Option)
12
67
● Removing a Misfed Paper (2-Bin Saddle-Stitch Finisher only) (Option)
12
67
Hold the latch and slide the large
capacity paper tray to the right.When the optional Large Capacity
Paper Tray (DA-MA301) is installed.
When the optional 2-Bin Finisher
(DA-FS600/605) is installed.
When the optional 2-Bin Saddle-Stitch
Finisher (DA-FS605) is installed. 
						

							23
Getting To Know
Your Machine
Saddle
Exit 
Cover
Misfed Paper
Push and Turn
Finisher Upper Cover
Misfed Paper
Punch Cover
Punch Cover
Latch
Door34
345
6
89
345
6
8 
						

							24
Getting To Know Your Machine
Misfed PaperInner Cover
Lower
Knob
Finisher Front Cover
Finisher
Misfed Paper
Stapler CoverKnob B
Misfed Paper Upper Cover
● Removing a Misfed Paper (2-Bin Finisher) (Option)
12
67
■ Problem Solving (Continued)
When the optional 2-Bin Finisher
(DA-FS330) is installed.
● Removing a Misfed Paper (1-Bin Saddle-Stitch Finisher) (Option)
12
When the optional 1-Bin Saddle-Stitch
Finisher (DA-FS355A) is installed.
● Removing a Misfed Paper (1-Bin Saddle-Stitch Finisher) (Option)
12
67
When the optional 1-Bin Saddle-Stitch
Finisher (DA-FS355A) is installed.When the misfed paper is not found:
or 
						

							25
Getting To Know
Your Machine
Finisher
FinisherFinisher Front CoverStitch Tray
FinisherUpper CoverUpper Cover
Trash Box
Finisher Guide
Misfed Paper
Knob A
345
6
89
When paper cannot be removed:
345
345
6
8
Finisher Entry guide 
						

							26
Before Starting
As an ENERGY STA R® Partner, Panasonic has determined that this product meets
the 
ENERGY STA R® guidelines for energy efficiency.
This voluntary program specifies certain energy consumption and usage standards.
This product will automatically “power down” after a specified period of non-use. The
use of this 
ENERGY STA R® compliant product will reduce energy consumption and
ultimately benefit the environment.
The default functions can be adjusted depending on your office requirements.
Please ask your authorized Panasonic dealer for more details.
Energy Star 
						

							27
Before Starting
1234567
1089
Contents
COPY Key
● To use the unit as a photocopier.
ENERGY SAVER Key
● Saves power while the copier is not in use.
INTERRUPT Key
● Interrupts other copy or print jobs while making copies.
FUNCTION Key
● Use when changing the paper size, initial function values (default values) and key operator settings.
RESET Key
● Resets all features to the initial power-on state.
CLEAR Key
● Clears the copy count in the display.
STOP Key
● Stops the copy run.
ALARM LED (RED)
● Flashes when trouble occurs.∗∗
ACTIVE LED (GREEN)
● Lights when machine is active.
PRINT DATA LED (GREEN)
● Lights when receiving print data.
ORIGINAL
SIZE KeysCOPY SIZE
KeysTouch Panel
DisplayKeypad START
Key
∗∗When the machine detects a problem or an alarm status is activated, the  8  Alarm LED lights
or begins to flash.
LED Lights: Machine detected a trouble status
  •  No paper in the selected tray or toner has run out.
  •  Machine detected trouble, such as paper misfed or jammed.
LED Flashes: Machine detected an alarm status
  •  No paper in the Tray. (Tray not selected)
  •  Toner is getting low, etc.
●The Control Panel displayed above shows only copier functions. Please refer to the
appropriate operating instructions for other control panel functions.
∗Fax/Email ON LINE LED for optional Fax/Internet Fax functions
Print ON LINE LED for Printer function
No.
1
2
3
4
5
6
7
8
9
10
NOTE
Control Panel 
						

							28
Before Starting
Touch Panel Display
12345910
202221
12
15
16
18
19
26
25
24
23
27
13
14
118
67
17
NOTE●Use only gentle finger pressure to activate the Touch Panel Display. DO NOT USE SHARP
OBJECTS such as pens, fingernails etc., as this may damage the panel.
●Touch Panel Display Brightness Adjustment:
To adjust the brightness of the Touch Panel display, press and while holding down the  C
(CLEAR) key, keep pressing the  ORIGINAL SIZE/LEDGER or the  COPY SIZE/LEDGER
keys until the desired brightness is achieved.
ORIGINAL SIZE/LEDGER : Dimmer
COPY SIZE/LEDGER        : BrighterJob Status Indicator
Ex.: Copying 3 sets.
The Indicator displays the progress of a job task as follows:
0/3 → 1/3 → 2/3 → 3/3
When the Department Counter function is set up, the departmental
Identification Code input screen is displayed on the Touch Panel
Display. A registered departmental Identification Code (4-digit) is
required to gain access to each secured function, or the secured
Copy/Fax/Scanner function(s) cannot be used. Please consult
with the key operator regarding the departmental Identification
Code(s) for the desired function. 
						

							29
Before Starting
Contents See Page
Warning Indications10 - 13
      : Add Toner        : Add Paper     : Call Service (Call your Service Provider)      : Waste Toner
Original Icon—
Original Size Indication—
Job Build and SADF/Multi-Size Feed Mode Indication 42, 43
Rotate Mode Indication—
Number of Copies / Original(s) —
Machine / User Error Code Indication (E1-01, U13, etc.) 17, 82
Copy Icon—
Copy Size Indication—
Reserve a Job Button57
Finisher Functions Indication45
Machine Outline with Tray Selection (Paper Tray and Output Tray) —
Paper Level and Size Indication —
Paper Tray Selection Button—
Tandem/Remote Button Indication 33
Tandem/Remote Button33
Density Indicator (7 steps)11, 31
Manual Exposure Select Buttons (Lighter and Darker) 11, 31
Original Mode Select Button (Text; Text / Photo; Photo) 11, 31
Copy Image and Paper Image Indication —
Copy Ratio Indication—
Original Image Indication—
Completion Notice Button37
Job Queue Button36
Job Settings Button—
•Selected copy jobs will be indicated on the right side of the touch panel display.
(2-Sided/Original → Copy, Sort/Finish, Zoom/Effects, Insertion/Overlay modes)
Proof Set Button33
Function Categories—
■ Touch Panel Display Indications
No.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27 
						

							30
Making Copies
Basic Menu
■ Copying the Same Size Originals (1:1)
Copy size is automatically selected.
100%
If set in other
function mode or
If original size
is not detected
NOTE●During the copy operation and after making copies, the fan motor may start spinning. This is a
normal operation and is used to cool down the copier.
12
■ Position of the original(s)
On the i-ADF On the Platen
■ Using the ADF
 Originals that cannot be used
●Post Cards,  Drawing Papers, Transparencies,
Labelling Papers, Heavyweight Papers, Thin Art
Papers,  Film Thermal Papers
Inappropriate Originals
●Paper with a smooth surface such as glossy and
coated papers
●Transparencies
●Originals with a Lead Edge that is ripped, creased,
folded, punched, or glued.
●Mixed width size Originals (except a combination of
Ledger and Letter)
●Paste-ups
●Pressure sensitive or carbon backed papers
●Paper with excessive curl
●Stapled originals
●Freshly printed copies from a laser printer
●Originals with fresh White-Out (Liquid paper
correction fluid)ADF
Upper Limit
Indicator
Set the originals up to the upper limit indicatorADF Tray
Original Guides
Adjust to the original’s width Note 1)Once after setting originals , pressing Start button, do not press originals as it may cause original jam.
Note 2)When originals with clipped or stapled,  take off clips or staples, then set originals neat.