Panasonic Dmc Fh20 Operaing Instructions Manual
Here you can view all the pages of manual Panasonic Dmc Fh20 Operaing Instructions Manual. The Panasonic manuals for Digital Camera are available online for free. You can easily download all the documents as PDF.
Page 41
- 41 - Basic Rotate the zoom lever towards [L] (W). 1 screen >12 screens >30 screens >Calendar screen display (P96) ANumber of the selected picture and the total number of recorded pictures • Rotate the zoom lever towards [ Z] (T) to return to the previous screen. • Pictures are not rotated for display. • Pictures displayed using [ ] cannot be played back. ∫ To return to Normal Playback1Press 3/4 /2 /1 to select a picture.• An icon will be displayed depending on the recorded picture and the...
Page 42
Basic - 42 - Switching the [PLAYBACK] Mode 1 Press [MODE] during playback.2Press 3/4 to select the item and then press [MENU/SET]. [NORMAL PLAY] (P40) All the pictures are played back. [SLIDE SHOW] (P90) The pictures are played back in sequence. [CATEGORY PLAY] (P93) The pictures grouped together in categories are played back. [FAVORITE PLAY] (P94) ¢ Your favorite pictures are played back.¢ [FAVORITE PLAY] is not displayed when [FAVORITE] has not been set.
Page 43
- 43 - Basic [PLAYBACK] Mode: ¸ Deleting Pictures Once deleted, pictures cannot be recovered.• Pictures on the built-in memory or the card, which is being played back will be deleted. To delete a single picture Select the picture to be deleted, and then press [ ‚]. A [DISPLAY] button B [‚ ] button Press 2 to select [YES] and then press [MENU/SET].
Page 44
Basic - 44 - ∫When [DELETE ALL] has been selected with the [FAVORITE] (P103) setting The selection screen is displayed again. Select [DELETE ALL] or [ ALL DELETE EXCEPT Ü], press 3 to select [YES] and delete the pictures. ([ALL DELETE EXCEPT Ü] cannot be selected if no pictures have been set as [FAVORITE].) Note • Do not turn the camera off while deleting (while [ ‚] is displayed). Use a ba ttery with sufficient battery power or the AC adaptor (optional) and DC coupler (optional). • If you press...
Page 45
- 45 - Advanced (Recording pictures) Advanced (Recording pictures)About the LCD Monitor Press [DISPLAY] to change. ALCD monitor B [DISPLAY] button • When the menu screen appears, the [DISPLAY] button is not activated. During Playback Zoom (P41), while playing back motion pictures (P95) and during a Slide Show (P90), you can only select “Normal display F” or “No display H”. In Recording Mode In Playback Mode Note • In [NIGHT PORTRAIT], [NIGHT SCENERY], [STARRY SKY] and [FIREWORKS] in Scene Mode,...
Page 46
Advanced (Recording pictures) - 46 - ∫Recording guideline When you align the subject on the horizontal and vertical guidelines or the cross point of these li nes, you can take pictures with well-designed composition by viewing the size, the slope and the balance of the subject. This is used when dividing the entire screen into 3 k3 for taking pictures with a well-balanced composition.
Page 47
- 47 - Advanced (Recording pictures) [REC] Mode: ñ· ¿ Taking Pictures using the Built-in Flash Set the flash to match the recording. Press 1 [‰]. Press 3/4 to select a mode. • You can also press 1 [‰] to select. • For information about flash settings that can be selected, refer to “Available flash settings by Recording Mode”. (P49) Press [MENU/SET]. • You can also press the shutter button halfway to finish. • The menu screen disappears after about 5 seconds. At this time, the selected item is...
Page 48
Advanced (Recording pictures) - 48 - ¢The flash is activated twice. The subject should not move until the second flash is activated. Interval until the second flash depends on the brightness of the subject. [RED-EYE REMOVAL] (P88) on the [REC] Mode menu is set to [ON], [ ] appears on the flash icon. ∫ About the digital red-eye correction When [RED-EYE REMOVAL] (P88) has been set to [ON] and Red-Eye Reduction ([ ], [ ], [ ]) is selected, Digital Red-Eye Corr ection is performed whenever the flash is...
Page 49
- 49 - Advanced (Recording pictures) ∫Available flash settings by Recording Mode The available flash settings depend on the Recording Mode. (± : Available, —: Not available, ¥: Scene Mode initial setting) ¢ [ ] is displayed. [ ], [ ], [ ] or [ ] is set depending on the type of subject and brightness. • The flash setting may change if the Recording Mode is changed. Set the flash setting again if necessary. • The flash setting is memorized even if the camera is turned off. However, the Scene Mode flash...
Page 50
Advanced (Recording pictures) - 50 - ∫The available flash range to take pictures• The available flash range is an approximation. DMC-FH20 DMC-FH3/DMC-FH1 ¢ Recording with zoom magnification of up to 3 k is possible. Pictures recorded with Tele may be darker than normal. • When you use the flash when you have set ISO sensitivity to [ ], ISO sensitivity automatically becomes a maximum of [ISO 1600]. • In [HIGH SENS.] (P64) in Scene Mode, the ISO sensitivity automatically switches to between [ISO1600]...