Panasonic Dmc Fx90 Owners Manual

							- 121 -
Wi-Fi
Required steps
1Install “PHOTOfunSTUDIO 6.4 HD Lite Edition with Wi-Fi” on your PC.
•
Refer to the separate “Basic Owner’s Manual” for further information on operating 
environments or installation.
2 Display the SSID and encryption key of this camera.  (P132)
3 Enter the encryption key of this camera into your PC.
4 Select images to send.  (P141, 142)
5 Set the PC as the destination, and send the images.  (P143)
Send images to your PC
This cameraPC
Step2 4 5 Step1 3 
						

							Wi-Fi
- 122 -
Required steps
1Download “LUMIX LINK” to your smartphone.  (P127)
2 Connect your smartphone to the wireless access point (broadband router).
•
Refer to the operating instructions of your smartphone for more information on the 
connection method.
3Set [Connection Mode] in the [Smartphone connection] to [Auto]  (P132).
4 Connect this camera to the wireless access point (broadband router).  (P128)
5 Launch “LUMIX LINK” on your smartphone.
6 Select images to send.  (P141, 142)
7 Set your smartphone as the destination, and send the images.  (P143)
Connect to the wireless access point (broadband router) and send the 
images
With this cameraand...
Use the Wi-Fi function to 
connect to the wireless 
access point (broadband 
router).Instantly send recorded images to your 
smartphone, the WEB service or AV 
device via the wireless access point 
(broadband router), and share images 
with friends.
Smartphone
WEB service AV device
Wireless access point 
(broadband router)
PC
Send pictures to smartphone
This cameraWireless access point 
(broadband router) Smartphone
Step
3 4 6 Step2 4 Step1 2 5
7 
						

							- 123 -
Wi-Fi
Required steps
1Connect this camera to the wireless access point (broadband router).  (P128)
2 Acquire the “LUMIX CLUB” login ID.  (P134)
3 Register the WEB service used to send images with “LUMIX CLUB”.  (P140)
4 Select images to send.  (P141, 142)
5 Set the WEB service as the  destination, and send the images.  (P143)
Required steps
1 Connect this camera to the wireless access point (broadband router).  (P128)
2 Acquire the “LUMIX CLUB” login ID.  (P134)
3 Register the AV device as the destination.  (P136)
4 Select images to send.  (P141, 142)
5 Set the external AV device as the destination, and send the images.  (P143)
Send images to WEB service
This cameraWireless 
access point  (broadband 
router) LUMIX CLUB
WEB service
Step1 2  4 Step1 Step3
5
Send images to external AV device
This camera Wireless access 
point (broadband  router) LUMIX CLUB
AV device
Step1 2  3 Step1
4  5 
						

							Wi-Fi
- 124 -
Required steps
1Connect AV device to the wireless access point (broadband router).
•
Refer to the operating instructions of the AV device for more information on the connection 
method.
2Connect this camera to the wireless access point (broadband router).  (P128)
3 Select images to send.  (P141, 142)
4 Set the home AV device as the  destination, and send the images.  (P143)
Required steps
1 Install “PHOTOfunSTUDIO 6.4 HD Lite Edition with Wi-Fi” on your PC.
•
Refer to the separate “Basic Owner’s Manual” for further information on operating 
environments or installation.
2Connect the PC to the wireless access point (broadband router).
•Refer to the operating instructions of the wireless access point (broadband router) for more 
information on the connection method.
3Connect this camera to the wireless access point (broadband router).  (P128)
4 Select images to send.  (P141, 142)
5 Set the PC as the destination, and send the images.  (P143)
Send images to home AV device
This cameraWireless access point 
(broadband router) AV device
Step
2 3 4 Step1 2 Step1
Send images to your PC
This camera Wireless access point 
(broadband router) PC
Step
3 4 5 Step2 3 Step1 2 
						

							- 125 -
Wi-Fi
Wi-Fi function
∫Use the camera as a wireless LAN device
When using equipment or computer systems that require more reliable security than 
wireless LAN devices, ensure that  the appropriate measures are taken for safety designs 
and defects for the systems used. Panasonic will not take any responsibility for any 
damage that arises when using the camera for any purpose other than as a wireless LAN 
device.
∫ Use of the Wi-Fi function is presumed to be in the United States
Use of the Wi-Fi function of this camera is  presumed to be in the United States. There is 
the risk that the camera violates the radio wave regulations if used in countries other than 
the United States, and Panasonic takes no responsibility for any violations.
∫ There is the risk that data sent and received via radio waves may be intercepted
Please note that there is the risk that data sent and received via radio waves may be 
intercepted by a third party.
∫ Do not use the camera in areas with magnetic fields, static electricity or 
interference
•
Do not use the camera in areas with magnetic fields, static electricity or interference, such as 
near microwave ovens. Radio waves may not reach the camera.
•Using the camera near devices that use the 2.4 GHz radio wave band may cause a decrease in 
performance in both devices.
∫ Do not connect to wireless networks with unrestricted access
When the camera utilises its Wi-Fi f unction, wireless networks will be searched 
automatically. When this happens, wireless netwo rks that you are not authorised to use 
(SSID
¢) may be displayed, however do not attempt to connect to the network as it may be 
considered as unauthorised access.
¢ SSID refers to the name that is used to identify a network over a wireless LAN connection. If 
the SSID matches for both devices, transmission is possible.
Note
•The camera cannot be used to connect to a public wireless LAN connection.•A wireless access point (broadband router) is required to connected from home.•Use a IEEE802.11b, IEEE802.11g or IEEE802.11n compatible device when using a wireless 
access point.
•When using a wireless access point (broadband router), we strongly recommend that you set a 
encryption to maintain information security.
•The Wi-Fi transmitter may become warm when using the Wi-Fi function; however this is not a 
sign of a malfunction.
•When sending images with the Wi-Fi function, do not cover the Wi-Fi transmitter with your 
hand. The camera may have difficulty sending images. 
						

							Wi-Fi
- 126 -
Connect with [Easy Setup]
Touch [ ] on the playback screen.
Touch  [ ] ([Wi-Fi Setup]).
Touch [Easy Setup].
Touch the destination icon for the image again.
•When selecting [AV device], touch [Home] or [External].•Follow the on-screen instructions and make the settings.•Proceed to the next page by touching [Next].•Close the menu after changing settings.
DestinationDescription of settings
[ ] ([Smartphone])
1Download the smartphone app “LUMIX 
LINK” for the smartphone and install it.
2In the smartphone Wi-Fi settings, change the 
connection access point to the camera and enter 
the encryption key displayed on the camera.
•A message is displayed when the connection is 
complete. Touch [OK] twice.
•Connection is fixed to wireless AP mode. To cancel 
this, set [Connection Mode] in [Smartphone 
connection] to [Auto].  (P132)
•Refer to the smartphone instruction manual for further 
information on how to use the smartphone.
•Set the Wi-Fi function ON in the smartphone Wi-Fi settings.
[ ] ([WEB Service])
1Touch connection method to wireless access 
point (broadband router).
•
Refer to “[Wireless settings]” (P128)  for the 
connection method.
2After saving the wireless access point 
(broadband router), acquire a “LUMIX CLUB” 
login ID.
•
Refer to “[LUMIX CLUB]”  (P134)  for acquiring a login ID.•A message is displayed when the connection is 
complete. Touch [OK].
[]
([External] in [AV 
device])
[] ([Home] in [AV 
device])
Touch connection method to wireless access 
point (broadband router).
•
Refer to “[Wireless settings]” 
(P128)  for the connection method.•A message is displayed when the connection is 
complete. Touch [OK].
[]([PC]) 
						

							- 127 -
Wi-Fi
Note
•The service may not be able to be used properl y depending on the type of smartphone being 
used. For compatible devices, see the following support site.
http://panasonic.jp/support/global/cs/dsc/
 (This Site is English only.)•When downloading the app on a mobile network, high packet communication fees may be 
incurred depending on the details of your contract.
∫ About the “LUMIX LINK”
The smartphone application “LUMIX LINK” is required to 
connect your smartphone to this camera.
Download the application using the method below.
For Android 
TM:1Connect your Android device to a network.2Select “Android Market”.3Enter “LUMIX LINK” into the search box.
4Select “LUMIX LINK” and install it.
•
The [ ] icon will be added to the menu.
For iPhoneR:1Connect the iPhone to the network.2Select “App Store”.
3Enter “LUMIX LINK” into the search box.4Select “LUMIX LINK” and install it.
•
The [ ] icon will be added to the menu.
Compatible OSes (current as of August 2011).
For Android TM:
Android2.1, Android2.2, Android2.3
For iPhone 
R:
iOS3, iOS4
“LUMIX LINK” can be used for the following.
•
Save images sent from this camera on your smartphone.•Send images saved on your smartphone to the WEB service or AV device.•Forward images sent from this camera to the WEB service or AV device.
LUMIX LINK 
						

							Wi-Fi
- 128 -
How to Use the [Manual Setup] Menu
Set the SSID and authentication type for the wireless access point (broadband router) you 
are connecting to manually before connecting.
Preparation: 
Check the “SSID”, “Encryption Type” and “Encryption Key” for the wireless access point 
(broadband router) you are using.
Select [Manual Setup] in the [Wi-Fi Setup] menu.  (P36)
Touch [ ] ([Wireless settings]).
Touch [Add].
[Wireless settings]
Touch connection method.
Connection methodDescription of settings
[WPS (Push-Button)]
Save push button type wireless access point (broadband 
router) that is compatible with Wi-Fi Protected SetupTM with 
a WPS mark.
•
Access points can be saved during playback by pressing and 
holding down the [Wi-Fi] button on the camera for at least 
3 seconds. Follow the on-screen instructions and make the 
settings.
[WPS (PIN)]
Save PIN code type wireless access point (broadband 
router) that is compatible with Wi-Fi Protected Setup with a 
WPS mark.
[Search Wireless AP]Search for a wireless access point (broadband router) that 
can be used. 
						

							- 129 -
Wi-Fi
Press the wireless access point (broadband router) WPS button until it switches to 
WPS mode.•
A message is displayed when the wireless access point (broadband router) has been 
saved.
•Refer to the wireless access point (broadband router) instruction manual for details.
1Touch the wireless access point (broadband router) you are connecting to.
2Enter the PIN code displayed on the camera screen into the wireless access 
point (broadband router).
3Touch [Next].
•A message is displayed when the wireless access point (broadband router) has been 
saved.
•Refer to the wireless access point (broadband router) instruction manual for details.
When connecting with [WPS (Push-Button)]
When connecting with [WPS (PIN)] 
						

							Wi-Fi
- 130 -
1Touch the wireless access point (broadband 
router) you are connecting to.
•
Touching [Update] will search for a wireless access 
point (broadband router) again.
2(If network authentication is encrypted) Enter the 
encryption key and touch [Set].
•
A message is displayed when the wireless access point 
(broadband router) has been saved.
∫Connect with [Add wireless AP]
Connect with [Add wireless AP] if the wireless access 
point (broadband router) you want to connect to is not displayed in the list in the screen of 
step 
1 of “When connecting with [Search Wireless AP]”.
1Touch [Add wireless AP] in the screen for step 1 of “When connecting with 
[Search Wireless AP]”.
2Enter the SSID of the wireless access point (broadband router) you are 
connecting to and touch [Set].
•
For details on how to enter characters, refer to “Entering Text” section on  P72.3Touch network authentication type.
•For information on network authentication, see the manual of the wireless access point 
(broadband router).
4Touch encryption type.
•The type of settings that can be changed may vary depending on the details of network 
authentication settings.
¢ A message is displayed when the access point has been saved.
5(When an option other than [No Encryption] is selected) Enter the encryption 
key and touch the [Set].
•
A message is displayed when the wireless access point (broadband router) has been 
saved.
When connecting with [Search Wireless AP]
Network authentication 
typeEncryption types that can be set
[WPA2-PSK]/[WPA-PSK] [TKIP]/[AES]
[Common Key] [WEP]
[Open] [No Encryption]
¢/[WEP]