Panasonic Dmc Fz1000 Owners Manual

181
7. Shutter and Drive Settings
6Press 3/4 to select the recording method, and then press [MENU/SET].
7Press the shutter button halfway.
•The recording screen will be displayed. You can also 
perform the same operation by pressing and holding 
[ ] until the recording screen is displayed.
8Press the shutter button fully.
•Up to 9999 frames can be recorded.
9Move the subject to decide on the composition.
•Repeat recording in the same way.
•If the camera is turned off during recording, a message for...

7. Shutter and Drive Settings
182
12Press  3/4  to select [OK] and then press [MENU/
SET].
•
Confirmation screen is displayed. It is executed when [Yes] 
is selected.
•Motion pictures can also be created from [Stop Motion 
Video] in the [Playback] menu.  (P240)
∫Changing the settings of Stop Motion Animation
You can change the settings in [Time Lapse/Animation] in the [Rec] menu.
∫ Adding pictures to the Stop Motion Animation group
Selecting [Add to Picture Group] in step 
6 will display group pictures...

183
7. Shutter and Drive Settings
•Automatic recording may not take place at set intervals because recording takes time under 
certain recording conditions, such as when the flash is used for recording.
•When a picture quality different from the aspect ratio of the original pictures is selected, black 
strips will be displayed on the top and bottom or the left and right of the motion picture.
•When a picture quality with a picture size larger than the original pictures is selected, the 
resolution of the...

184
8.Functions Customized for Various 
Subjects and Purposes
Making Multiple Exposures on One Picture 
([Multi Exp.])
Applicable modes: 
Gives an effect like multi exposure. (up to 4 times equivalent per a single image)
1Select the menu.
2Press  3/4  to select [Start] and then press [MENU/
SET].
3Decide on the composition, and take the first picture.
•After taking the picture, press the shutter button halfway 
down to take the next picture.
•Press  3/4 to select the item and then press [MENU/SET] 
for...

185
8. Functions Customized for Various Subjects and Purposes
∫ About Automatic Gain Control setting
Select [Auto Gain] on the screen shown in step2 and set it.
∫ Combining RAW images in the card
On the screen shown in step
2, set [Overlay] to [ON].
After [Start], images in the card will be displayed. Select the RAW images, press [MENU/
SET], and continue recording.
•
[Overlay] is available only for RAW images taken with this unit.
•Image is not recorded until completion.
•The recording information...

8. Functions Customized for Various Subjects and Purposes
186
Disabling Operational Sounds and the Output 
of Light at once 
([Silent Mode])
Applicable modes: 
This function is useful for recording images in  a quiet environment, public facility, etc. or 
recording images of subjects such as babies or animals.
Select the menu.
Settings: [ON]/[OFF]
•
Operational sounds are muted, and the flash and the AF Assist lamp are forced off.
The following settings are fixed.
–[Shutter Type]: [ESHTR]
–[Flash Mode]:...

187
8. Functions Customized for Various Subjects and Purposes
Taking Clear Pictures by Registering Faces 
([Face Recog.])
Applicable modes: 
Face Recognition is a function which finds a face resembling a registered face and 
prioritizes focus and exposure automatically.  Even if the person is located towards the 
back or on the end of a line in a group photo, the camera can still take a clear picture.
Select the menu.
Settings: [ON]/[OFF]/[MEMORY]
•
The following functions will also work with the Face...

8. Functions Customized for Various Subjects and Purposes
188
•[Face Recog.] only works when the AF Mode is set to [ š].
•During the Burst Mode, [Face Recog.] picture information can be attached to only the first 
picture.
•When group pictures are played back, the name of the first picture of the set is displayed.
•Face Recognition may take more time to select and recognize distinctive facial features than 
regular Face/Eye Detection.
•Even when face recognition information has been  registered, pictures...

189
8. Functions Customized for Various Subjects and Purposes
You can register information such as names and birthdays for face images of up to 6 
people.
1Press  3/4 to select [MEMORY] and then press [MENU/SET].
2Press  3/4 /2 /1  to select the Face Recognition 
frame that is not registered, and then press [MENU/
SET].
•
[New] will not display if there are 6 people already 
registered. Delete a person already registered to register a 
new person.
3Take the picture adjusting the face with the guide....

8. Functions Customized for Various Subjects and Purposes
190
4Press  3/4  to select the item and then press [MENU/SET].
•You can register up to 3 face images.
[Name] It is possible to register names.1
Press  4 to select [SET] and then press [MENU/SET].
2 Enter the name.
•
For details on how to enter characters, refer to “Entering Text” 
section on  P55.
[Age] It is possible to register the birthday.1
Press  4 to select [SET] and then press [MENU/SET].
2 Press  2/1 to select the items (Year/Month/Day),...