Panasonic Dmc Fz1000 Owners Manual
Here you can view all the pages of manual Panasonic Dmc Fz1000 Owners Manual. The Panasonic manuals for Digital Camera are available online for free. You can easily download all the documents as PDF.
Page 161
![Page 161
161
6. Focus and Brightness (Exposure) Settings
¢1 When the [ISO Limit Set] (P162) of [Rec] menu is set to anything except [OFF], it is set
automatically within the value set in [ISO Limit Set].
¢ 2 Only available when [Extended ISO] is set.
Characteristics of the ISO sensitivity
•
For the focus range of flash when [AUTO] is set, refer to P201.•[ ] is not available in Shutter-Priority AE Mode and Manual Exposure Mode.
•When [Multi Exp.] is set, the maximum setting is [3200].•When [Direct Focus Area]...](http://img.usermanuals.tech/thumb/58/65613/w300_dmc-fz1000_en_adv_om_d-160.png "Page 161
161
6. Focus and Brightness (Exposure) Settings
¢1 When the [ISO Limit Set] (P162) of [Rec] menu is set to anything except [OFF], it is set
automatically within the value set in [ISO Limit Set].
¢ 2 Only available when [Extended ISO] is set.
Characteristics of the ISO sensitivity
•
For the focus range of flash when [AUTO] is set, refer to P201.•[ ] is not available in Shutter-Priority AE Mode and Manual Exposure Mode.
•When [Multi Exp.] is set, the maximum setting is [3200].•When [Direct Focus Area]...")
161 6. Focus and Brightness (Exposure) Settings ¢1 When the [ISO Limit Set] (P162) of [Rec] menu is set to anything except [OFF], it is set automatically within the value set in [ISO Limit Set]. ¢ 2 Only available when [Extended ISO] is set. Characteristics of the ISO sensitivity • For the focus range of flash when [AUTO] is set, refer to P201.•[ ] is not available in Shutter-Priority AE Mode and Manual Exposure Mode. •When [Multi Exp.] is set, the maximum setting is [3200].•When [Direct Focus Area]...
Page 162
![Page 162
6. Focus and Brightness (Exposure) Settings
162
Applicable modes:
It will select optimal ISO sensitivity with set value as limit depending on the brightness of
the subject.
Settings: [200]/[400]/[800]/[1600]/[3200]/[6400]/[12800]/[OFF]
•
It will work when the [Sensitivity] is set to [AUTO] or [ ].
Not available in these cases:
•
[ISO Limit Set] is disabled in the following cases:–[Clear Nightscape]/[Cool Night Sky]/[Warm Glowing Nightscape]/[Handheld Night Shot]
(Scene Guide Mode)
–When recording...](http://img.usermanuals.tech/thumb/58/65613/w300_dmc-fz1000_en_adv_om_d-161.png "Page 162
6. Focus and Brightness (Exposure) Settings
162
Applicable modes:
It will select optimal ISO sensitivity with set value as limit depending on the brightness of
the subject.
Settings: [200]/[400]/[800]/[1600]/[3200]/[6400]/[12800]/[OFF]
•
It will work when the [Sensitivity] is set to [AUTO] or [ ].
Not available in these cases:
•
[ISO Limit Set] is disabled in the following cases:–[Clear Nightscape]/[Cool Night Sky]/[Warm Glowing Nightscape]/[Handheld Night Shot]
(Scene Guide Mode)
–When recording...")
6. Focus and Brightness (Exposure) Settings 162 Applicable modes: It will select optimal ISO sensitivity with set value as limit depending on the brightness of the subject. Settings: [200]/[400]/[800]/[1600]/[3200]/[6400]/[12800]/[OFF] • It will work when the [Sensitivity] is set to [AUTO] or [ ]. Not available in these cases: • [ISO Limit Set] is disabled in the following cases:–[Clear Nightscape]/[Cool Night Sky]/[Warm Glowing Nightscape]/[Handheld Night Shot] (Scene Guide Mode) –When recording...
Page 163
![Page 163
163
6. Focus and Brightness (Exposure) Settings
Selecting the Method for Measuring Brightness
([Metering Mode])
Applicable modes:
Type of optical measurement to measure brightness can be changed.
•
Those menu items are shared by the [Rec] menu and the [Motion Picture] menu. When the
setting for either of the two is changed, the setting for the other is also changed.
> [Rec] > [Metering Mode]
[]
(Multiple) This is the method in which the
camera measures the most suitable
exposure by judging the...](http://img.usermanuals.tech/thumb/58/65613/w300_dmc-fz1000_en_adv_om_d-162.png "Page 163
163
6. Focus and Brightness (Exposure) Settings
Selecting the Method for Measuring Brightness
([Metering Mode])
Applicable modes:
Type of optical measurement to measure brightness can be changed.
•
Those menu items are shared by the [Rec] menu and the [Motion Picture] menu. When the
setting for either of the two is changed, the setting for the other is also changed.
> [Rec] > [Metering Mode]
[]
(Multiple) This is the method in which the
camera measures the most suitable
exposure by judging the...")
163 6. Focus and Brightness (Exposure) Settings Selecting the Method for Measuring Brightness ([Metering Mode]) Applicable modes: Type of optical measurement to measure brightness can be changed. • Those menu items are shared by the [Rec] menu and the [Motion Picture] menu. When the setting for either of the two is changed, the setting for the other is also changed. > [Rec] > [Metering Mode] [] (Multiple) This is the method in which the camera measures the most suitable exposure by judging the...
Page 164
![Page 164
164
7.Shutter and Drive Settings
Setting the Shutter Type
Applicable modes:
You can use either of the two shutters to take pictures: the mechanical shutter or the
electronic shutter.
¢ 1 The mechanical shutter sound cannot be muted.
¢ 2 Electronic shutter sound settings can be changed in [Shutter Vol.]. (P49)
Select the menu.
Mechanical shutterElectronic Shutter
Description The camera starts an exposure
electronically, and ends it with the
mechanical shutter. The camera starts and ends an
exposure...](http://img.usermanuals.tech/thumb/58/65613/w300_dmc-fz1000_en_adv_om_d-163.png "Page 164
164
7.Shutter and Drive Settings
Setting the Shutter Type
Applicable modes:
You can use either of the two shutters to take pictures: the mechanical shutter or the
electronic shutter.
¢ 1 The mechanical shutter sound cannot be muted.
¢ 2 Electronic shutter sound settings can be changed in [Shutter Vol.]. (P49)
Select the menu.
Mechanical shutterElectronic Shutter
Description The camera starts an exposure
electronically, and ends it with the
mechanical shutter. The camera starts and ends an
exposure...")
164 7.Shutter and Drive Settings Setting the Shutter Type Applicable modes: You can use either of the two shutters to take pictures: the mechanical shutter or the electronic shutter. ¢ 1 The mechanical shutter sound cannot be muted. ¢ 2 Electronic shutter sound settings can be changed in [Shutter Vol.]. (P49) Select the menu. Mechanical shutterElectronic Shutter Description The camera starts an exposure electronically, and ends it with the mechanical shutter. The camera starts and ends an exposure...
Page 165
![Page 165
165
7. Shutter and Drive Settings
•When [ ] is displayed on the screen, pict ures will be taken with the electronic shutter.
•When [Burst Rate] is set to [SH], pictures will be taken with the electronic shutter.•When [Silent Mode] is set to [ON], pictures will be taken with the electronic shutter.•When a moving subject is recorded with the electronic shutter, the subject may appear
distorted on the picture.
•When the electronic shutter is used under fluorescent or LED lighting, etc., horizontal
stripes...](http://img.usermanuals.tech/thumb/58/65613/w300_dmc-fz1000_en_adv_om_d-164.png "Page 165
165
7. Shutter and Drive Settings
•When [ ] is displayed on the screen, pict ures will be taken with the electronic shutter.
•When [Burst Rate] is set to [SH], pictures will be taken with the electronic shutter.•When [Silent Mode] is set to [ON], pictures will be taken with the electronic shutter.•When a moving subject is recorded with the electronic shutter, the subject may appear
distorted on the picture.
•When the electronic shutter is used under fluorescent or LED lighting, etc., horizontal
stripes...")
165 7. Shutter and Drive Settings •When [ ] is displayed on the screen, pict ures will be taken with the electronic shutter. •When [Burst Rate] is set to [SH], pictures will be taken with the electronic shutter.•When [Silent Mode] is set to [ON], pictures will be taken with the electronic shutter.•When a moving subject is recorded with the electronic shutter, the subject may appear distorted on the picture. •When the electronic shutter is used under fluorescent or LED lighting, etc., horizontal stripes...
Page 166
![Page 166
7. Shutter and Drive Settings
166
Select a Drive Mode
Applicable modes:
You can change what the camera will do when you press the shutter button.
Rotating the drive mode dial.
Not available in these cases:
•
Not available with [Panorama Shot] in Scene Guide Mode.
Single When the shutter button is pressed, only one picture is
recorded.
Burst
(P167) Recordings are made in succession while the shutter button
is pressed.
Auto Bracket
(P171)Each time the shutter button is pressed, recordings are made...](http://img.usermanuals.tech/thumb/58/65613/w300_dmc-fz1000_en_adv_om_d-165.png "Page 166
7. Shutter and Drive Settings
166
Select a Drive Mode
Applicable modes:
You can change what the camera will do when you press the shutter button.
Rotating the drive mode dial.
Not available in these cases:
•
Not available with [Panorama Shot] in Scene Guide Mode.
Single When the shutter button is pressed, only one picture is
recorded.
Burst
(P167) Recordings are made in succession while the shutter button
is pressed.
Auto Bracket
(P171)Each time the shutter button is pressed, recordings are made...")
7. Shutter and Drive Settings 166 Select a Drive Mode Applicable modes: You can change what the camera will do when you press the shutter button. Rotating the drive mode dial. Not available in these cases: • Not available with [Panorama Shot] in Scene Guide Mode. Single When the shutter button is pressed, only one picture is recorded. Burst (P167) Recordings are made in succession while the shutter button is pressed. Auto Bracket (P171)Each time the shutter button is pressed, recordings are made...
Page 167
![Page 167
167
7. Shutter and Drive Settings
Taking Pictures using Burst Mode
Applicable modes:
Pictures are taken continuously while the shutter button is pressed.
•
Pictures taken with a burst speed of [SH] will be recorded as a single burst group (P225).
1Set the drive mode dial to [ ] .
2Focus on the subject and take a picture.
•Hold down the shutter button fully to activate the Burst
Mode.
∫Changing the burst speed
1Select the menu.
2Press 3/4 to select the burst speed and then press [MENU/SET].
>
[Rec] >...](http://img.usermanuals.tech/thumb/58/65613/w300_dmc-fz1000_en_adv_om_d-166.png "Page 167
167
7. Shutter and Drive Settings
Taking Pictures using Burst Mode
Applicable modes:
Pictures are taken continuously while the shutter button is pressed.
•
Pictures taken with a burst speed of [SH] will be recorded as a single burst group (P225).
1Set the drive mode dial to [ ] .
2Focus on the subject and take a picture.
•Hold down the shutter button fully to activate the Burst
Mode.
∫Changing the burst speed
1Select the menu.
2Press 3/4 to select the burst speed and then press [MENU/SET].
>
[Rec] >...")
167 7. Shutter and Drive Settings Taking Pictures using Burst Mode Applicable modes: Pictures are taken continuously while the shutter button is pressed. • Pictures taken with a burst speed of [SH] will be recorded as a single burst group (P225). 1Set the drive mode dial to [ ] . 2Focus on the subject and take a picture. •Hold down the shutter button fully to activate the Burst Mode. ∫Changing the burst speed 1Select the menu. 2Press 3/4 to select the burst speed and then press [MENU/SET]. > [Rec] >...
Page 168
![Page 168
7. Shutter and Drive Settings
168
•The Burst speed may become slower depending on the following settings.
–[Picture Size] (P131) /[Quality] (P132)/[Sensitivity] (P160)/Focus Mode (P139)/[Focus/
Release Priority] (P149)
•Refer to P132 for information about RAW files.
[SH]¢2
(Super high
speed)[H]
(High
speed)[M]
(Middle speed)[L]
(Low speed)
Burst
speed
(pictures/ second)AFS 5012 72
AFF/AFC —772
Live View during Burst
Mode None None Available Available
¢
1
With RAW files —10¢3, 410¢3, 410¢3, 4...](http://img.usermanuals.tech/thumb/58/65613/w300_dmc-fz1000_en_adv_om_d-167.png "Page 168
7. Shutter and Drive Settings
168
•The Burst speed may become slower depending on the following settings.
–[Picture Size] (P131) /[Quality] (P132)/[Sensitivity] (P160)/Focus Mode (P139)/[Focus/
Release Priority] (P149)
•Refer to P132 for information about RAW files.
[SH]¢2
(Super high
speed)[H]
(High
speed)[M]
(Middle speed)[L]
(Low speed)
Burst
speed
(pictures/ second)AFS 5012 72
AFF/AFC —772
Live View during Burst
Mode None None Available Available
¢
1
With RAW files —10¢3, 410¢3, 410¢3, 4...")
7. Shutter and Drive Settings 168 •The Burst speed may become slower depending on the following settings. –[Picture Size] (P131) /[Quality] (P132)/[Sensitivity] (P160)/Focus Mode (P139)/[Focus/ Release Priority] (P149) •Refer to P132 for information about RAW files. [SH]¢2 (Super high speed)[H] (High speed)[M] (Middle speed)[L] (Low speed) Burst speed (pictures/ second)AFS 5012 72 AFF/AFC —772 Live View during Burst Mode None None Available Available ¢ 1 With RAW files —10¢3, 410¢3, 410¢3, 4...
Page 169
![Page 169
169
7. Shutter and Drive Settings
Focusing in Burst Mode
The method for achieving focus varies depending on the focus mode (P139) and the
[Focus/Release Priority] (P149) setting in the [Custom] menu.
¢1 When the subject is dark or the burst speed is set to [SH], the focus is fixed on the first
picture.
¢ 2 The burst speed may become slower because the camera is continuously focusing on the
subject.
¢ 3 Burst speed takes priority, and focus is estimated within possible range.
•We recommend using the...](http://img.usermanuals.tech/thumb/58/65613/w300_dmc-fz1000_en_adv_om_d-168.png "Page 169
169
7. Shutter and Drive Settings
Focusing in Burst Mode
The method for achieving focus varies depending on the focus mode (P139) and the
[Focus/Release Priority] (P149) setting in the [Custom] menu.
¢1 When the subject is dark or the burst speed is set to [SH], the focus is fixed on the first
picture.
¢ 2 The burst speed may become slower because the camera is continuously focusing on the
subject.
¢ 3 Burst speed takes priority, and focus is estimated within possible range.
•We recommend using the...")
169 7. Shutter and Drive Settings Focusing in Burst Mode The method for achieving focus varies depending on the focus mode (P139) and the [Focus/Release Priority] (P149) setting in the [Custom] menu. ¢1 When the subject is dark or the burst speed is set to [SH], the focus is fixed on the first picture. ¢ 2 The burst speed may become slower because the camera is continuously focusing on the subject. ¢ 3 Burst speed takes priority, and focus is estimated within possible range. •We recommend using the...
Page 170
![Page 170
7. Shutter and Drive Settings
170
Not available in these cases:
•
The Burst Mode is disabled in the following cases.–[Glistening Water]/[Glittering Illuminations]/[H andheld Night Shot]/[Soft Image of a Flower]/
[Panorama Shot] (Scene Guide Mode)
–[Rough Monochrome]/[Silky Monochrome]/[Miniature Effect]/[Soft Focus]/[Star Filter]/
[Sunshine] (Creative Control Mode)
–When White Balance Bracket is set
–When recording motion pictures–When recording using the flash–When recording with [iHandheld Night Shot]...](http://img.usermanuals.tech/thumb/58/65613/w300_dmc-fz1000_en_adv_om_d-169.png "Page 170
7. Shutter and Drive Settings
170
Not available in these cases:
•
The Burst Mode is disabled in the following cases.–[Glistening Water]/[Glittering Illuminations]/[H andheld Night Shot]/[Soft Image of a Flower]/
[Panorama Shot] (Scene Guide Mode)
–[Rough Monochrome]/[Silky Monochrome]/[Miniature Effect]/[Soft Focus]/[Star Filter]/
[Sunshine] (Creative Control Mode)
–When White Balance Bracket is set
–When recording motion pictures–When recording using the flash–When recording with [iHandheld Night Shot]...")
7. Shutter and Drive Settings 170 Not available in these cases: • The Burst Mode is disabled in the following cases.–[Glistening Water]/[Glittering Illuminations]/[H andheld Night Shot]/[Soft Image of a Flower]/ [Panorama Shot] (Scene Guide Mode) –[Rough Monochrome]/[Silky Monochrome]/[Miniature Effect]/[Soft Focus]/[Star Filter]/ [Sunshine] (Creative Control Mode) –When White Balance Bracket is set –When recording motion pictures–When recording using the flash–When recording with [iHandheld Night Shot]...