Panasonic Dmc Fz200 Owners Manual

							- 151 -
Recording
Applicable modes: 
This prevents the recording of wind-noise automatically.
Settings: [AUTO]/[OFF]Note
•
Sound quality may be different than usual when [Wind Cut] is set.•It is fixed to [OFF] in the following cases.–[Miniature Effect] (Creative Control Mode)
–When the [Zoom Mic] is set to [ON]
Applicable modes: 
Coupled to the zoom operation, it will clearly record far sounds with tele, and surrounding 
sounds with wide.
Settings: [ON]/[OFF]
Note
•
When set to [ON] and performing zoom, the operation sound may be recorded enhanced in 
accordance with the surrounding sounds. Also, au dio recording level will be lower compared to when 
[OFF].
•The stereo effect of the audio is reduced when the picture is enlarged.•It is fixed to [OFF] in the following cases.
–[Miniature Effect] (Creative Control Mode)
[Wind Cut]
  (DMC-FZ200) 
–[High Speed Video] (Creative Video Mode)
[Zoom Mic]
 (DMC-FZ200) 
–[High Speed Video] (Creative Video Mode) 
						

							- 152 -
Playback/Editing
Having Fun with Recorded Pictures
The brightness and color of the pictures taken can be balanced.
•With [Auto Retouch], a new edited picture is created. Check that there is free space on the built-in 
memory or the card.
[Auto Retouch] cannot be used if the card’s Write-Protect switch is set to [LOCK].
¢ These pictures are examples to show the effect.
1Press 2/ 1 to select a picture, and then press 3 .
2Press 3/4 to select [Auto Retouch], and then press [MENU/SET].
3Press 3/4 to select [ON], and then press [MENU/SET].
•Confirmation screen is displayed. It is executed when [Yes] is selected.
Note
•Depending on the picture, noise may be emphasized by [Auto Retouch].•Effects may be difficult to see depending on the picture.•It may not be possible to perform [Auto Retouch] on pictures which have already been retouched.
•[Auto Retouch] may not be performed on pictures recorded with other equipment.•[Auto Retouch] is not possible in the following cases:–Motion pictures
–3D pictures–Pictures taken in [Panorama Shot] in Scene Mode
[Auto Retouch] 
						

							- 153 -
Playback/Editing
You can add your desired effects to the pictures that you have taken.
•With [Creative Retouch], a new edited picture is created. Check that there is free space on the 
built-in memory or the card.
[Creative Retouch] cannot be used if the card’s Write-Protect switch is set to [LOCK].
1Press 2/ 1 to select a picture, and then press 3 .
2Press 3/4 to select [Creative Retouch], and then press [MENU/SET].
3Press 3/4 to select an item, and then press [MENU/SET].
•You can select the item from the following options that are also available in the Creative 
Control mode. Read  P117 for details on the respective effects.
[Expressive]/[Retro]/[High Key]/[Low Key]/[Sepia][Dynamic Monochrome]/[Impressive Art]/
[High Dynamic]/[Cross Process]/[Toy Effect]/[Miniature Effect]/[Soft Focus]/[Star Filter]/[One 
Point Color]
•Confirmation screen is displayed. It is executed when [Yes] is selected.•If you press [MENU/SET] while the following items are selected, you can add the image 
effect that matches your preference.
Note
•Effects may be difficult to see depending on the picture.
•The image effect may appear weak compared to the effect given by the Creative Control Mode.•[Creative Retouch] may not be performed on pictures recorded with other equipment.•[Creative Retouch] is not possible in the following cases:
–Motion pictures–3D pictures–Pictures taken in [Panorama Shot] in Scene Mode
[Creative Retouch] 
–[Cross Process]:You can select the image effect from Greenish, Bluish, 
Yellowish or Reddish.
–
[Toy Effect]:You can select the image effect from Orange emphasized, 
Standard, Blue emphasized.
–
[One Point Color]:Set the color you want to leave. 
						

							- 154 -
Playback/Editing
Playing Back Burst Pictures (DMC-FZ200) 
∫About the burst picture group
Pictures taken with burst 
speed set to [ ] or [ ] are recorded as a 
single burst picture group.
The burst icon [
˜] will be displayed for the burst picture group.
•
Deleting and editing in a group unit is possible. (For example, if you delete a 
burst picture group with [ ˜], all the pictures in that group are deleted.)
Note
•Burst pictures recorded after the number of burst pictures has exceeded 50000 will not be grouped.
•Burst pictures recorded on other cameras may not be recognized as a burst picture group. •Burst pictures will not be grouped if recorded without setting the clock.•If you delete all pictures except one, that picture will be saved as a single picture instead of as a 
burst picture group.
Press  2/1  to select a picture with a burst icon [ ˜], and then press  3.
∫ Operations when continuously playing back the burst picture group
The cursor displayed during playback is the same as  3/4/ 2/1.
¢ These operations can be performed only in the Pause Mode.
1Select a picture with a burst icon [ ˜], and then press  4.
2Press  2/1  to select the picture.
•Press 4 again to return to the normal playback screen.•The same playback controls used for normal pictures can be used for pictures within the burst 
picture group. (Such as Multi Playback, Playback Zoom and deleting images)
Continuously playing back burst pictures
3
Play/Pause
4St op
2Fast rewind, Previous picture¢
1Fast forward, Next picture¢
Playing back each burst picture 
						

							- 155 -
Playback/Editing
Editing Burst Pictures (DMC-FZ200) 
•The following editing menu can be used.–[Upload Set]/[Title Edit]/[Text Stamp]/[Resize]/[Cropping]¢/[Leveling]¢/[Favorite]/[Print Set]/
[Protect]/[Copy]
¢  Cannot be used for the entire burst picture group.
1Press [MENU/SET] during playback to display the [Playback] menu.  (P52)2Press 3/4  to select item, and press  1.3Select [Single] or [Multi] and then press [MENU/SET].
4Select an image with burst icon [ ˜], and perform editing.
1Select a picture with a burst icon [ ˜], and then press  4.2Press [MENU/SET] to display the [Playback] menu.
3Press  3/4  to select item, and press  1.4Select [Single] or [Multi] and then press [MENU/SET].
5Select the picture, and perform editing.
∫ About display of [Favorite], [Print Set] and [Protect] icons during playback of burst 
picture groups
By setting [Favorite]  (P170), [Print Set]  (P171), or [Protect]  (P173) setting to a picture in the 
Burst Picture Group, number of settings (number of  settings and total number when [Print Set] 
is set) is displayed on the icon  for the first picture of each group.
Note
•
For details on the various ways of editing, refer to “Using the [Playback] menu”.  (P161)•Pictures for which you have perf ormed [Text Stamp], [Resize], [Cro pping] or [Leveling] will be saved 
separately from burst pictures.
Editing in burst picture group units (All pictures in the burst picture group)
Editing single pictures within a burst picture group
Initial screen for burst 
picture group
(first burst picture)
[Favorite][Print Set][Protect]
A Total number of all pictures stored within the burst picture group.
B Number of pictures in given burst picture group subject to a setting.
C Total number of prints set over all burst picture groups.
•For example, if 3 pictures are to be printed from each of 2 burst pictures within the group, a 6 
will appear here.
SLF26
22
A
SLF26
22
B
SLF26
22
C
BSLF26
22
B 
						

							- 156 -
Playback/Editing
Various methods of playback
You can play back the recorded pictures in various methods.
1Press [MENU/SET] during playback.
2Press 1.
3Press 3/4 to select the item and then press [MENU/SET].
•Following items can be selected.
¢The playback method for the 3D pictures can be switched. This item is only displayed 
during HDMI output. Refer to  P180 for details about the playback method.
You can play back the pictures you have tak en in synchronization with music, and you can do 
this in sequence while leaving a fixed interval between each of the pictures.
You can also put together a slide show compos ed of only still pictures, only motion pictures, 
only 3D pictures etc.
We recommend this feature when you view your pictures by connecting the camera to a TV.
[Normal Play]  (P45) [Filtering Play] (P159)
[2D/3D Settings]
¢[Calendar]  (P160)
[Slide Show]  (P156)
[Slide Show]
1Select the group to play back by pressing  3/4, and then press [MENU/
SET].
2Press 3/ 4 to select the item and then press [MENU/
SET].
•Refer to  P180 for the method to play back [3D Play] pictures in 3D.•During [Category Selection], press  3/4/2 /1 to select a category, 
and then press [MENU/SET]. Refer to  P159 for category details.
3Press 3 to select [Start] and then press [MENU/SET].
4Press 4 to finish the slide show.
•Normal playback resumes after the slide show finishes. 
						

							- 157 -
Playback/Editing
∫Operations performed during slide show
The cursor displayed during playback is the same as  3/4/ 2/1.
¢ Operable only in the following cases.
–in the Pause Mode–during motion picture playback–during panorama picture playback
∫Changing the slide show settings
You can change the settings for slide show playback by selecting [Effect] or [Setup] on the slide 
show menu screen.
[Effect]
This allows you to select the screen effects when switching from one picture to the next.
[NATURAL], [SLOW], [SWING], [URBAN], [OFF], [AUTO]
•
When [URBAN] has been selected, the picture may appear in black and white as a screen effect.•[AUTO] can be used only when [Category Selection] has been selected. The pictures are played 
back with the recommended effects in each category.
•Some [Effect] will not operate when playing back pictures displayed vertically.•Screen effects do not operate during a [3D Play] slide show.
3Play/Pause
4St op
2Back to previous picture¢
1Ahead to next picture¢
[W]Reduce volume level
[T]Increase volume level
  (DMC-FZ200) 
–during Burst Picture Group playback
 (DMC-FZ200) 
•[Effect] is fixed to [OFF] during the [Video Only] slide show, or during a slide show of [ ] in 
[Category Selection].
•Even if [Effect] is set, it does not work during a slide show of burst picture group.
  (DMC-FZ60) 
•During the [Video Only] slide show, [Effect] is fixed to [OFF].
WT 
						

							- 158 -
Playback/Editing
[Setup]
[Duration] or [Repeat] can be set.
•
[Duration] can be set only when [OFF] has been selected as the [Effect] setting.•The [Duration] setting is not applicable to the following images during a slide show.
–Motion pictures–Panorama pictures
SettingsDescription of settings
[Duration] [1 SEC.]/[2 SEC.]/[3 SEC.]/[5 SEC.]
[Repeat] [ON]/[OFF]
[Sound] [AUTO]: Music is played when the still pictures are played back, 
and audio is played when the motion pictures are played 
back.
[Music]: Music is played back.
[Audio]: Audio (only for motion pictures) is played back.
[OFF]: There will be no sound.
  (DMC-FZ200) 
–Burst Picture Group 
						

							- 159 -
Playback/Editing
Pictures are classified into only still pictures, only motion pictures, or only 3D pictures etc., and 
played back.
∫ About the categories to be sorted
It will be sorted as following when [Category Selection] is set.
¢ 1Press  3/4 /2 /1 to select the person to play back and then press [MENU/SET].
¢ 2 The whole group with pictures taken with burst settings [ ] and [ ] will be treated as face 
recognition pictures.
[Filtering Play]
SettingsDescription of settings
[Picture Only] Only still pictures are played back.
[Video Only] Only motion pictures are played back.
[3D Play] Only 3D pictures are played back.
•Refer to 
P180 for the method to play back [3D Play] pictures in 3D.
[Category Selection] This mode allows you to search images by Scene Mode or other categories 
(such as [Portrait], [Scenery] or [Night Scenery]) and sort the pictures into 
each of the categories. You can then play back the pictures in each 
category.
Press 
3/4 /2 /1  to select the category and 
then press [MENU/SET] to set.
•
Only the category for which pictures have been 
found can be selected.
[Favorite] You can play back the pictures you have set as [Favorite]  (P170).
Recording information e.g. Scene Modes
[Face Recog.]¢ 1
*[Portrait], [i-Portrait], [Soft Skin], [Night Portrait], [i-Night Portrait], [Baby1]/[Baby2], 
[i-Baby]
,[Scenery], [i-Scenery], [Panorama Shot], [Sunset], [i-Sunset], [Glass Through]
.[Night Portrait], [i-Night Portrait], [Night Scenery], [i-Night Scenery], [Handheld Night 
Shot], [iHandheld Nite Shot]
[Sports], [Panning]
Î[Baby1]/[Baby2], [i-Baby]
í[Pet]
1[Food]
[Travel Date]
(DMC-FZ200) 
¢ 2Pictures taken with burst speed set to [ ] or [ ] 
						

							- 160 -
Playback/Editing
You can display pictures by recording date.Note
•
The recording date of the picture selected in the playback screen becomes the date selected when 
the calendar screen is first displayed.
•If there are multiple pictures with the same record ing date, the first picture recorded on that day is 
displayed.
•You can display the calendar between January 2000 and December 2099.•If the date is not set in the camera, the recording date is set as January 1st, 2012.
•If you take pictures after setting the travel destination in [World Time], the pictures are displayed by 
the dates at the travel destination in Calendar Playback.
[Calendar]
1Press 3/ 4/2/1 to select the date to be played back.
•If there were no pictures recorded during a month, that month is not 
displayed.
2Press [MENU/SET] to display the pictures that were 
recorded on the selected date.
•Press [ ] to return to the calendar screen.
46/ .0/ 56& 8&% 5)6 3* 45