Panasonic Dmc Fz200 Owners Manual

							- 161 -
Playback/Editing
Using the [Playback] menu
You can setup pictures to be uploaded to image sharing sites and perform editing like cropping 
recorded pictures, as well as set up the protection of recorded images, etc.
•
With [Text Stamp], [Resize], [Cropping] or [Leveling], a new edited picture is created. A new picture 
cannot be created if there is no free space on the built-in memory or the card so we recommend 
checking that there is free space and then editing the picture.
It is possible to setup the images to be uploaded to the image sharing sites (Facebook/
YouTube) on this unit.
•
You can only upload motion pictures to YouTube, while you may upload both motion pictures and still 
pictures to Facebook.
•This cannot be done to the images in the built-in memory. Copy the images to a card  (P175), 
and then perform the [Upload Set].
1Select [Upload Set] on the [Playback] menu. (P52)
2Press 3/ 4 to select [Single] or [Multi] and then press [MENU/SET].
[Upload Set]
3Select the picture, and then press 
[MENU/SET] to set.
•The setting is canceled when 
[MENU/SET] is pressed again.
•Exit the menu after it is set.
[Multi] setting
Press [DISP.] to set (repeat), and then 
press [MENU/SET] to set. [Single]
[Multi]
Press  2/1  to select 
the picture. Press 
3/4 /2 /1  to 
select the pictures.
•
The setting is canceled when [DISP.] is pressed again.•Confirmation screen is displayed. It is executed when [Yes] is selected. 
Exit the menu after it is executed.
123
4
56 
						

							- 162 -
Playback/Editing
∫Upload to the image sharing sites
An upload tool built-in to the camera “LUMIX Image Uploader” is automatically copied to the 
card when you setup [Upload Set].
Perform the upload operation after connecting the camera to a PC  (P182). For details, refer to 
P185 .
∫ Canceling all the [Upload Set] settings
1Select [Upload Set] on the [Playback] menu.2Press  3/4  to select [Cancel] and then press [MENU/SET].
•Confirmation screen is displayed. It is executed when [Yes] is selected. 
Exit the menu after it is executed.
Note
•Setting may not be possible for pictures recorded with other cameras.•It cannot be set with a card with less than 512 MB of memory.
  (DMC-FZ200) 
•The pictures that were taken with the [Quality] set to [ ] cannot be set to [Upload Set]. 
						

							- 163 -
Playback/Editing
You can add text (comments) to pictures. After text has been registered, it can be stamped in 
prints using [Text Stamp] (P164).
1Select [Title Edit] on the [Playback] menu.  (P52)
2Press 3/4 to select [Single] or [Multi] and then press [MENU/SET].
4Enter the text.  (P132)
•Exit the menu after it is set.
Note
•To delete the title, erase all the text in the text input screen.
•You can print out texts (comments) using the “PHOTOfunSTUDIO” bundled software on the 
CD-ROM (supplied).
•You cannot use [Title Edit] for the following pictures.–Motion pictures–3D pictures
–Pictures recorded with other equipment
[Title Edit]
3Select the picture, and then press 
[MENU/SET] to set.
•[ ’] is displayed for pictures with titles 
already registered.
[Multi] setting
Press [DISP.] to set (repeat), and then 
press [MENU/SET] to set.
•
The setting is canceled when [DISP.] is 
pressed again.
[Single] [Multi]
Press  2/1  to select 
the picture. Press 
3/4 /2 /1  to 
select the pictures.
  (DMC-FZ200) 
•
You can set up to 100 pictures at one time with [Multi].
  (DMC-FZ60) 
•You can set up to 50 pictures at one time with [Multi].
  (DMC-FZ200) 
–Pictures taken with [ ], [ ] or [ ]
123
4
56 
						

							- 164 -
Playback/Editing
You can stamp the recording date/time, name, location, Travel Date or title onto the recorded 
pictures.
1Select [Text Stamp] on the [Playback] menu. (P52)
2Press 3/4 to select [Single] or [Multi] and then press [MENU/SET].
4Press 3/4 to select text stamp items, and then press  1.
5Press 3/4 to select the settings, and then press [MENU/SET].
[Text Stamp]
3Select the picture, and then press 
[MENU/SET] to set.
•[‘ ] is displayed on pictures already with 
date or text stamped.
[Multi] setting
Press [DISP.] to set (repeat), and then 
press [MENU/SET] to set.
•
The setting is canceled when [DISP.] is 
pressed again.
[Single] [Multi]
Press  2/1  to select 
the picture. Press 
3/4 /2 /1  to 
select the pictures.
SettingsDescription of settings
[Shooting Date] [W/O TIME]:
Stamp the year, month and day.
[WITH TIME]: Stamp the year, month, day, hour and minutes.
[OFF]
[Name] []:
Stamps names registered in name settings for [Face Recog.].
[]:
Stamps names registered in name settings for [Baby1]/
[Baby2] or [Pet] in Scene Mode.
[OFF]
[Location] [ON]:
Stamps the travel destination name set under [Location].
[OFF]
[Travel Date] [ON]:
Stamps the Travel Date set under [Travel Date].
[OFF]
[Title] [ON]:
Stamps the title input in the [Title Edit].
[OFF]
123
4
56 
						

							- 165 -
Playback/Editing
6Press [MENU/SET].
•Confirmation screen is displayed. It is executed when [Yes] is selected. 
Exit the menu after it is executed.
Note
•When you print pictures stamped with text, the date will be printed over the stamped text if you 
specify printing of the date at the photo shop or on the printer.
•The picture quality may deteriorate when text stamping is carried out.
•Depending on the printer being used, some characters may be cut at printing. Check before printing.•When text is stamped onto the images smaller than 0.3 M, it is difficult to read it.•Text and dates cannot be stamped on the pictures in the following cases.
–Motion pictures–Pictures taken in [Panorama Shot] in Scene Mode–3D pictures
–Pictures recorded without setting the clock and title–Pictures with date or text stamped–Pictures recorded with other equipment
  (DMC-FZ200) 
•You can set up to 100 pictures at one time in [Multi].
  (DMC-FZ60) 
•You can set up to 50 pictures at one time in [Multi].
  (DMC-FZ200) 
–Pictures taken with [ ], [ ] or [ ] 
						

							- 166 -
Playback/Editing
Recorded motion picture can be divided in two. It is recommended for when you want to divide a 
part you need with a part you do not need.
It cannot be restored once divided.
Note
•
[Video Divide] may not be performed on motion pictures recorded with other equipment.•Motion pictures cannot be divided at a location  close to the start or end of the motion picture.
•With [MP4] motion pictures, the order of pictures will change if divided.
It is recommended to search these motion pictures  by using [Calendar] or [Video Only] in the 
[Filtering Play].
•Motion pictures with a short recording time cannot be divided.
[Video Divide]
1Select [Video Divide] on the [Playback] menu. (P52)
2Press 2/ 1 to select the motion picture to divide, and then press [MENU/
SET].
3Press 3 at the location to divide.
•Motion picture is played back from the same location when  3 is 
pressed again.
•You can finely adjust the location for division by pressing 2 /1 while 
the motion picture is paused.
4Press 4.
•Confirmation screen is displayed. It is executed when [Yes] is selected. 
Exit the menu after it is executed.
•Motion picture may be lost if the card or battery is removed while processing the dividing.
3s 
						

							- 167 -
Playback/Editing
To allow easy posting to web pages, attachment to e-mail etc., picture size (number of pixels) is reduced.
1Select [Resize] on the [Playback] menu. (P52)
Note
•
The picture quality of the resized picture will deteriorate.
•It may not be possible to resize pictures recorded with other equipment.•The [Resize] feature is disabled during the following conditions:–Motion pictures–Pictures taken in [Panorama Shot] in Scene Mode–3D pictures–Pictures with date or text stamped
[Resize]
2Press 3/ 4 to select [Single] or [Multi] and then press [MENU/SET].
3Select the picture and size.
[Single] setting
1Press 2/1  to select the picture, and then press [MENU/
SET].
2Press  2/1  to select the size, and then press [MENU/
SET].
•
Confirmation screen is displayed. It is executed when [Yes] is 
selected. 
Exit the menu after it is executed.
[Multi] setting
1Press  3/4  to select the size, and then press 
[MENU/SET].
2Press  3/4 /2 /1 to select the picture, and then press 
[DISP.].
•
Repeat this step for each picture, and press [MENU/SET] to set.•Confirmation screen is displayed. It is executed when [Yes] is 
selected. 
Exit the menu after it is executed.
  (DMC-FZ200) 
•You can set up to 100 pictures at one time in [Multi].
  (DMC-FZ60) 
•You can set up to 50 pictures at one time in [Multi].
  (DMC-FZ200) 
–Pictures taken with [ ], [ ] or [ ]
3
123
4
56 
						

							- 168 -
Playback/Editing
You can enlarge and then crop the important part of the recorded picture.
1Select [Cropping] on the [Playback] menu. (P52)
4Press [MENU/SET].
•Confirmation screen is displayed. It is executed when [Yes] is selected. 
Exit the menu after it is executed.
Note
•The picture quality of the cropped picture will deteriorate.•It may not be possible to crop pictures recorded with other equipment.•Information regarding the Face Recognition in the original picture will not be copied to images 
having undergone [Cropping].
•The [Cropping] feature is disabled during the following conditions:–Motion pictures
–Pictures taken in [Panorama Shot] in Scene Mode–3D pictures–Pictures with date or text stamped
[Cropping]
2Press 2/ 1 to select the picture, and then press [MENU/SET].
3Use the zoom lever and press  3/4/2/1 to select the parts to be 
cropped.
Zoom lever (T): Enlargement
Zoom lever (W): Reduction
3 /4 /2/ 1: Move
  (DMC-FZ200) 
–
Pictures taken with [ ], [ ] or [ ]
WT 
						

							- 169 -
Playback/Editing
Minute tilting of the image can be adjusted.
1Select [Leveling] on the [Playback] menu. (P52)
2Press 2/1 to select the picture, and then press [MENU/SET].
3Press 2/1 to adjust the tilting, and press [MENU/
SET].
1 : clockwise
2 : counter-clockwise
•
Up to 2 o can be adjusted.
•Confirmation screen is displayed. It is executed when [Yes] is selected. 
Exit the menu after it is executed.
Note
•Quality of image may become coarse when leveling is performed.
•Leveling may not be performed on images recorded with other equipment.•Information regarding the Face Recognition in the original picture will not be copied to images 
having undergone [Leveling].
•The [Leveling] feature is disabled during the following conditions:–Motion pictures–Pictures taken in [Panorama Shot] in Scene Mode
–3D pictures–Pictures with date or text stamped
[Leveling]
  (DMC-FZ200) 
–Pictures taken with [ ], [ ] or [ ]
1.6 Ã 
						

							- 170 -
Playback/Editing
You can do the following if a mark has been added to pictures and they have been set as 
favorites.–
Play back only the pictures set as favorites. ([Favorite] in [Filtering Play])
–Play back the pictures set as favorites only as a slide show.–Delete all the pictures not set as favorites. ([All Delete Except Favorite])
1Select [Favorite] on the [Playback] menu.  (P52)
2Press 3/4 to select [Single] or [Multi] and then press [MENU/SET].
∫Canceling all the [Favorite] settings1Select [Favorite] on the [Playback] menu.2Press  3/4  to select [Cancel] and then press [MENU/SET].
•Confirmation screen is displayed. It is executed when [Yes] is selected. 
Exit the menu after it is executed.
Note
•You can set up to 999 pictures as favorites.•You may not be able to set pictures taken with other equipment as favorites.
[Favorite]
3Select the picture, and then press 
[MENU/SET].
•The settings are canceled when [MENU/
SET] is pressed again.
•Exit the menu after it is set.
[Single] [Multi]
Press  2/1  to select 
the picture. Press 
3/4 /2 /1  to 
select the pictures.
  (DMC-FZ200) 
•
The [Favorite] feature is disabled during the following conditions:–Pictures taken with [ ]
123
4
56