Panasonic Dmc Fz47 Owners Manual
Have a look at the manual Panasonic Dmc Fz47 Owners Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 10737 Panasonic manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
![Page 136
Playback/Editing
- 136 -
To allow easy posting to web pages, attachment to e-mail etc., picture size (number of
pixels) is reduced.
Select [RESIZE] on the [PLAYBACK] Mode menu. (P46)
Note
•You can set up to 50 pictures at one time in [MULTI].•The picture quality of the resized picture will deteriorate.•It may not be possible to resize pictures recorded with other equipment.•The [RESIZE] feature is disabled during the following conditions:–Motion pictures–Pictures that were previously stamped with [TEXT...](http://img.usermanuals.tech/thumb/58/65501/w64_dmc-fz47_adv_en_om_d-135.png "Page 136
Playback/Editing
- 136 -
To allow easy posting to web pages, attachment to e-mail etc., picture size (number of
pixels) is reduced.
Select [RESIZE] on the [PLAYBACK] Mode menu. (P46)
Note
•You can set up to 50 pictures at one time in [MULTI].•The picture quality of the resized picture will deteriorate.•It may not be possible to resize pictures recorded with other equipment.•The [RESIZE] feature is disabled during the following conditions:–Motion pictures–Pictures that were previously stamped with [TEXT...")
![Page 137
- 137 -
Playback/Editing
You can enlarge and then crop the important part of the recorded picture.
Select [CROPPING] on the [PLAYBACK] Mode menu. (P46)
Press [MENU/SET].
•Confirmation screen is displayed. It is executed when [YES] is selected.
Exit the menu after it is executed.
Note
•The picture quality of the cropped picture will deteriorate.•It may not be possible to crop pictures recorded with other equipment.•The [CROPPING] feature is disabled during the following conditions:–Motion...](http://img.usermanuals.tech/thumb/58/65501/w64_dmc-fz47_adv_en_om_d-136.png "Page 137
- 137 -
Playback/Editing
You can enlarge and then crop the important part of the recorded picture.
Select [CROPPING] on the [PLAYBACK] Mode menu. (P46)
Press [MENU/SET].
•Confirmation screen is displayed. It is executed when [YES] is selected.
Exit the menu after it is executed.
Note
•The picture quality of the cropped picture will deteriorate.•It may not be possible to crop pictures recorded with other equipment.•The [CROPPING] feature is disabled during the following conditions:–Motion...")
![Page 138
Playback/Editing
- 138 -
Minute tilting of the image can be adjusted.
Select [LEVELING] on the [PLAYBACK] Mode menu. (P46)
Press 2/1 to select the picture, and then press [MENU/SET].
Press 2/1 to adjust the tilting, and press [MENU/
SET].
1 : clockwise
2 : counter-clockwise
•
Up to 2 o can be adjusted.•Confirmation screen is displayed. It is executed when [YES] is selected.
Exit the menu after it is executed.
Note
•Quality of image may become coarse when leveling is performed.•Leveling may not be...](http://img.usermanuals.tech/thumb/58/65501/w64_dmc-fz47_adv_en_om_d-137.png "Page 138
Playback/Editing
- 138 -
Minute tilting of the image can be adjusted.
Select [LEVELING] on the [PLAYBACK] Mode menu. (P46)
Press 2/1 to select the picture, and then press [MENU/SET].
Press 2/1 to adjust the tilting, and press [MENU/
SET].
1 : clockwise
2 : counter-clockwise
•
Up to 2 o can be adjusted.•Confirmation screen is displayed. It is executed when [YES] is selected.
Exit the menu after it is executed.
Note
•Quality of image may become coarse when leveling is performed.•Leveling may not be...")
![Page 139
- 139 -
Playback/Editing
This mode allows you to automatically display pictures vertically if they were recorded
holding the camera vertically.
Select [ROTATE DISP.] on the [PLAYBACK] Mode menu. (P46)
Note
•When you play back pictures on a PC, they canno t be displayed in the rotated direction unless
the OS or software is compatible with Exif. Exif is a file format for still pictures which allows
recording information etc. to be added. It was established by “JEITA (Japan Electronics and
Information...](http://img.usermanuals.tech/thumb/58/65501/w64_dmc-fz47_adv_en_om_d-138.png "Page 139
- 139 -
Playback/Editing
This mode allows you to automatically display pictures vertically if they were recorded
holding the camera vertically.
Select [ROTATE DISP.] on the [PLAYBACK] Mode menu. (P46)
Note
•When you play back pictures on a PC, they canno t be displayed in the rotated direction unless
the OS or software is compatible with Exif. Exif is a file format for still pictures which allows
recording information etc. to be added. It was established by “JEITA (Japan Electronics and
Information...")
![Page 140
Playback/Editing
- 140 -
You can do the following if a mark has been added to pictures and they have been set as
favorites. –
Play back only the pictures set as favorites. ([FAVORITE PLAY])–Play back the pictures set as favorites only as a slide show.–Delete all the pictures not set as favorites. ([ALL DELETE EXCEPT Ü])
Select [FAVORITE] on the [PLAYBACK] Mode menu. (P46)
Press 3/4 to select [SINGLE] or [MULTI] and then press [MENU/
SET].
∫ Canceling all the [FAVORITE] settings
1Select [FAVORITE] on...](http://img.usermanuals.tech/thumb/58/65501/w64_dmc-fz47_adv_en_om_d-139.png "Page 140
Playback/Editing
- 140 -
You can do the following if a mark has been added to pictures and they have been set as
favorites. –
Play back only the pictures set as favorites. ([FAVORITE PLAY])–Play back the pictures set as favorites only as a slide show.–Delete all the pictures not set as favorites. ([ALL DELETE EXCEPT Ü])
Select [FAVORITE] on the [PLAYBACK] Mode menu. (P46)
Press 3/4 to select [SINGLE] or [MULTI] and then press [MENU/
SET].
∫ Canceling all the [FAVORITE] settings
1Select [FAVORITE] on...")
![Page 142
Playback/Editing
- 142 -
∫Canceling all the [PRINT SET] settings
1Select [PRINT SET] on the [PLAYBACK] Mode menu.2Press 3/4 to select [CANCEL] and then press [MENU/SET].
•Confirmation screen is displayed. It is executed when [YES] is selected.
Exit the menu after it is executed.
∫ To print the date
After setting the number of prints, set/cancel printing with the recording date by pressing
[DISPLAY].
•
Depending on the photo printing store or the printer, the date may not be printed even if you set...](http://img.usermanuals.tech/thumb/58/65501/w64_dmc-fz47_adv_en_om_d-141.png "Page 142
Playback/Editing
- 142 -
∫Canceling all the [PRINT SET] settings
1Select [PRINT SET] on the [PLAYBACK] Mode menu.2Press 3/4 to select [CANCEL] and then press [MENU/SET].
•Confirmation screen is displayed. It is executed when [YES] is selected.
Exit the menu after it is executed.
∫ To print the date
After setting the number of prints, set/cancel printing with the recording date by pressing
[DISPLAY].
•
Depending on the photo printing store or the printer, the date may not be printed even if you set...")
![Page 143
- 143 -
Playback/Editing
You can set protection for pictures you do not want to be deleted by mistake.
Select [PROTECT] on the [PLAYBACK] Mode menu. (P46)
∫Canceling all the [PROTECT] settings1Select [PROTECT] on the [PLAYBACK] Mode menu.2Press 3/4 to select [CANCEL] and then press [MENU/SET].
•Confirmation screen is displayed. It is executed when [YES] is selected.
Exit the menu after it is executed.
Note
•The protect setting may not be effective on other equipment.•Even if you protect pictures in...](http://img.usermanuals.tech/thumb/58/65501/w64_dmc-fz47_adv_en_om_d-142.png "Page 143
- 143 -
Playback/Editing
You can set protection for pictures you do not want to be deleted by mistake.
Select [PROTECT] on the [PLAYBACK] Mode menu. (P46)
∫Canceling all the [PROTECT] settings1Select [PROTECT] on the [PLAYBACK] Mode menu.2Press 3/4 to select [CANCEL] and then press [MENU/SET].
•Confirmation screen is displayed. It is executed when [YES] is selected.
Exit the menu after it is executed.
Note
•The protect setting may not be effective on other equipment.•Even if you protect pictures in...")
![Page 144
Playback/Editing
- 144 -
You can delete or change the information relating to Face Recognition for the selected
picture.
Select [FACE REC EDIT] on the [PLAYBACK] Mode menu. (P46)
Note
•Deleted information regarding the [FACE RECOG.] cannot be restored.•When all Face Recognition information in a picture has been canceled, the picture will not be
categorised using Face Recognition in [CATEGORY PLAY].
•You cannot edit the Face Recognition information of protected pictures.
[FACE REC EDIT]
Press 3/4 to...](http://img.usermanuals.tech/thumb/58/65501/w64_dmc-fz47_adv_en_om_d-143.png "Page 144
Playback/Editing
- 144 -
You can delete or change the information relating to Face Recognition for the selected
picture.
Select [FACE REC EDIT] on the [PLAYBACK] Mode menu. (P46)
Note
•Deleted information regarding the [FACE RECOG.] cannot be restored.•When all Face Recognition information in a picture has been canceled, the picture will not be
categorised using Face Recognition in [CATEGORY PLAY].
•You cannot edit the Face Recognition information of protected pictures.
[FACE REC EDIT]
Press 3/4 to...")
![Page 145
- 145 -
Playback/Editing
You can copy the data of the pictures you have taken from the built-in memory to a card or
from a card to the built-in memory.
Select [COPY] on the [PLAYBACK] Mode menu. (P46)
Press 3/4 to select the copy destination and then press [MENU/
SET].
(When [ ] is selected) Press 2/1 to select the picture and then
press [MENU/SET].
•Confirmation screen is displayed. It is executed when [YES] is selected.
Exit the menu after it is executed.
•Do not turn the camera off at any point...](http://img.usermanuals.tech/thumb/58/65501/w64_dmc-fz47_adv_en_om_d-144.png "Page 145
- 145 -
Playback/Editing
You can copy the data of the pictures you have taken from the built-in memory to a card or
from a card to the built-in memory.
Select [COPY] on the [PLAYBACK] Mode menu. (P46)
Press 3/4 to select the copy destination and then press [MENU/
SET].
(When [ ] is selected) Press 2/1 to select the picture and then
press [MENU/SET].
•Confirmation screen is displayed. It is executed when [YES] is selected.
Exit the menu after it is executed.
•Do not turn the camera off at any point...")
- 141 - Playback/Editing DPOF “Digital Print Order Format” is a system that allows the user to select which pictures to print, how many copies of each picture to print and whether or not to print the recording date on the pictures when using a DPOF compatible photo printer or photo printing store. For details, ask at your photo printing store. When you want to use a photo printing store to print pictures recorded on the built-in memory, copy them to a card (P145) and then set the print setting. For more information visit: http://panasonic.jp/dc/dpof_110/white_e.htm Select [PRINT SET] on the [PLAYBACK] Mode menu. (P46) Press 3/4 to set the number of prints, and then press [MENU/SET] to set. •When [MULTI] has been selected, repeat steps 3 and 4 for each picture.•Exit the menu after it is set. [PRINT SET] Press 3/4 to select [SINGLE] or [MULTI] and then press [MENU/ SET]. Select the picture, and then press [MENU/SET]. [SINGLE] [MULTI] Press 2/1 to select the picture. Press 3/4 /2 /1 to select the pictures.
Playback/Editing - 142 - ∫Canceling all the [PRINT SET] settings 1Select [PRINT SET] on the [PLAYBACK] Mode menu.2Press 3/4 to select [CANCEL] and then press [MENU/SET]. •Confirmation screen is displayed. It is executed when [YES] is selected. Exit the menu after it is executed. ∫ To print the date After setting the number of prints, set/cancel printing with the recording date by pressing [DISPLAY]. • Depending on the photo printing store or the printer, the date may not be printed even if you set to print the date. For further information, ask at your photo printing store or refer to the operating instructions for the printer. •The date cannot be printed on pictures stamped with text. Note •The number of prints can be set from 0 to 999.•Depending on the printer, the date print settings of the printer may take precedence so check if this is the case. •It may not be possible to use the print settings with other equipment. In this case, cancel all the settings, and reset the settings. •[PRINT SET] cannot be set for motion pictures.•If the file is not based on the DCF standard, the DPOF print setting cannot be set.
- 143 - Playback/Editing You can set protection for pictures you do not want to be deleted by mistake. Select [PROTECT] on the [PLAYBACK] Mode menu. (P46) ∫Canceling all the [PROTECT] settings1Select [PROTECT] on the [PLAYBACK] Mode menu.2Press 3/4 to select [CANCEL] and then press [MENU/SET]. •Confirmation screen is displayed. It is executed when [YES] is selected. Exit the menu after it is executed. Note •The protect setting may not be effective on other equipment.•Even if you protect pictures in the built-in memo ry or a card, they will be deleted if the built-in memory or the card is formatted. •Even if you do not protect pictures on a card, they cannot be deleted when the card’s Write-Protect switch is set to [LOCK]. [PROTECT] Press 3/4 to select [SINGLE] or [MULTI] and then press [MENU/ SET]. Select the picture, and then press [MENU/SET] to set. [MULTI] setting •Repeat these steps for each picture.•The settings are canceled when [MENU/SET] is pressed again. •Exit the menu after it is set. [SINGLE] [MULTI] Press 2/1 to select the picture. Press 3/4 /2 /1 to select the pictures.
Playback/Editing - 144 - You can delete or change the information relating to Face Recognition for the selected picture. Select [FACE REC EDIT] on the [PLAYBACK] Mode menu. (P46) Note •Deleted information regarding the [FACE RECOG.] cannot be restored.•When all Face Recognition information in a picture has been canceled, the picture will not be categorised using Face Recognition in [CATEGORY PLAY]. •You cannot edit the Face Recognition information of protected pictures. [FACE REC EDIT] Press 3/4 to select [REPLACE] or [DELETE] and then press [MENU/ SET]. Press 2/1 to select the picture and then press [MENU/SET]. Press 2/1 to select the person and then press [MENU/SET]. (When [REPLACE] is selected) Press 3/4/2/1 to select the person to replace and then press [MENU/SET]. •Confirmation screen is displayed. It is executed when [YES] is selected. Exit the menu after it is executed.
- 145 - Playback/Editing You can copy the data of the pictures you have taken from the built-in memory to a card or from a card to the built-in memory. Select [COPY] on the [PLAYBACK] Mode menu. (P46) Press 3/4 to select the copy destination and then press [MENU/ SET]. (When [ ] is selected) Press 2/1 to select the picture and then press [MENU/SET]. •Confirmation screen is displayed. It is executed when [YES] is selected. Exit the menu after it is executed. •Do not turn the camera off at any point during the copying process. Note •If a picture exists with the same name (folder numbe r/file number) as the picture to be copied in the copy destination when [ ] is selected, a new folder is created and the picture is copied. If a picture exists with the same name (folder numbe r/file number) as the picture to be copied in the copy destination when [ ] is selected, that picture is not copied. •It may take time to copy the picture data.•[PRINT SET], [PROTECT] or [FAVORITE] settings will not be copied. Perform the settings again after copying is finished. •Motion picture recorded in [AVCHD] cannot be copied. [COPY] : All the picture data in the built-in memory are copied onto the card at one time. : One picture at a time is copied from the card to the built-in memory.
Connecting to other equipment - 146 - Connecting to other equipmentPlaying Back Pictures on a TV Screen Pictures recorded with this unit can be played back on a TV screen. Confirm the terminals on your TV and use a cable compatible with the terminals. Image quality may vary with the connected terminals. 1 High quality 2 HDMI socket3Video socket Connect the camera and a TV. •Check the direction of the terminals and plug in/out straight holding onto the plug. (It may result in malfunction by the deforming of the terminal if it is plugged in obliquely or in wrong direction.) A HDMI mini cable (optional) B HDMI socket C AV cable (optional) D Yellow: to the video input socket E White: to the audio input socket F Align the marks, and insert. Preparations: Turn this unit and the TV off. To connect with an HDMI mini cable (optional) • Always use a genuine Panasonic HDMI mini cable (RP-CDHM15, RP-CDHM30; optional). Part numbers: RP-CDHM15 (1.5 m) (5 feet), RP-CDHM30 (3.0 m) (10 feet) •Check the [HDMI MODE]. (P57)•Audio will be played back as stereo (2ch).•No picture is displayed on the screen.•For more details about VIERA Link (HDMI) playback, refer to P148. To connect with an AV cable (optional) • Always use a genuine Panasonic AV cable (DMW-AVC1; optional).•Check the [TV ASPECT]. (P56)•Audio will be played back in monaural.•The viewfinder cannot be displayed. AV OUT/DIGITAL AV OUT/DIGITALAV OUT/DIGITAL
- 147 - Connecting to other equipment Turn on the TV and select the input to match the terminal in use. Turn the camera on and then press [(]. Note •Depending on the [ASPECT RATIO], black bands may be displayed on the top and bottom or the left and right of the pictures. •Change the screen mode on your TV if the picture is displayed with the top or bottom cut off.•Output from the HDMI mini cable has priority when both AV cable and HDMI mini cable are connected. •The connection with the USB connection cable will take priority when you connect the USB connection cable simultaneously with the HDMI mini cable. •When you play back a picture vertically, it may be blurry.•When pictures are displayed, they may not be displayed properly depending on the type of TV.•Read the operating instructions for the TV. The recorded still pictures can be played back on a TV with an SD Memory Card slot. •Proper playback (aspect ratio) will be dependent on the TV used for viewing.•Motion pictures recorded with [AVCHD] can be played back on Panasonic TVs (VIERA) with the AVCHD logo mark. •For cards compatible with playback, refer to the operating instructions of the TV.
Connecting to other equipment - 148 - Connect this unit to a Panasonic TV compatible with VIERA Link with a HDMI mini cable (optional) (P146). Turn the camera on and then press [ (]. Operate with the remote control for the TV. •Operate with reference to the operation icons displayed on the screen. Panasonic TV compatible with VIERA Link Using VIERA Link (HDMI) What is the VIERA Link (HDMI) (HDAVI Control™)? •VIERA Link™ is a new name for EZ Sync™.•This function allows you to use your remote control for the Panasonic TV for easy operations when this unit has been connected to a VIERA Link compatible device using a HDMI mini cable (optional) for automatic linked operations. (Not all operations are possible.) •VIERA Link is a unique Panasonic function built on a HDMI control function using the standard HDMI CEC (Consumer Electronics Control) specification. Linked operations with HDMI CEC compatible devices made by other companies are not guaranteed. When using devices made by other companies that are compatible with VIERA Link, refer to the operating instructions for the respective devices. •This unit is compatible with VIERA Link Ver.5. VIERA Link Ver.5 is the newest Panasonic version and is also compatible with existing Panasonic VIERA Link devices. (As of December 2010) Preparations: Set the [VIERA Link] to [ON]. (P57) 1 [SUB MENU] 2 [OK] 3 [RETURN] ¢The shape of the remote control varies depending on the region. Operate following the TV instructions displayed on screen.
- 149 - Connecting to other equipment Note •To play back the audio of the motion pictures, set the [SOUND] in the Slide Show setting screen to [AUTO] or [AUDIO]. •Operation icons are hidden, if no operation is performed for a while when the operation icons are displayed. Operation icons are displayed when one of the following buttons is pressed while the operation icons are not displayed. –3/ 4/2 /1, [OK], [SUB MENU], [RETURN], Red button, Green button, Yellow button•It is recommended to connect this unit to an HDMI terminal other than the HDMI1 if there are 2 or more HDMI input terminals on the TV. •Operation using the button on this unit will be limited. ∫ Other linked operations Turning the power off: If you use the remote control for the TV to turn off the power, the power on this unit also turns off. Automatic input switching: • If you connect with a HDMI mini cable and then turn on the power on this unit, and then press [ ( ], the input channel on the TV automatically switches to this unit’s screen. If the TV’s power is in standby status, it will turn on automatically (if [Set] has been selected for the TV’s [Power on link] setting). •Depending on the HDMI terminal on the TV, the input channel may not switch automatically. In this case, use the remote control for the TV to switch the input channel. (For details on how to switch input, please read the operating instructions for the TV.) •If VIERA Link does not work properly, refer to page 185. Note •If you are unsure whether or not the TV you are using are compatible with VIERA Link, read the operating instructions for the TV. •Available linked operations between this unit and a Panasonic TV is different depending on the types of Panasonic TVs even if they are compatible with VIERA Link. Refer to the operating instructions of the TV for the operations that support on the TV. •Operation is not possible with a cable that is not based on the HDMI standard.•Always use a genuine Panasonic HDMI mini cable (RP-CDHM15, RP-CDHM30; optional). Part numbers: RP-CDHM15 (1.5 m) (5 feet), RP-CDHM30 (3.0 m) (10 feet) •[HDMI MODE] for this unit is determined automatically when the VIERA Link is operating.
Connecting to other equipment - 150 - Playing back 3D pictures Connecting the camera to a 3D compatible television and playing back pictures taken in 3D allows you to enjoy 3D pictures for extra impact. It is also possible to play back the recorded 3D pictures by inserting an SD card into the 3D compatible television with an SD card slot. Connect the unit to a 3D compatible television using the HDMI mini cable and display the playback screen. (P146) •When [VIERA Link] (P57) is set to [ON] and the camera is connected to a TV supporting VIERA Link, input of the TV will be switched automatically and playback screen will be displayed. Refer to P148 for details. •For the pictures recorded in 3D, [3D] will appear on the thumbnail display at playback. ∫ Play back as a 3D slide show by selecting only the still pictures recorded in 3D Select [3D PLAY] in [SLIDE SHOW] in the [PLAYBACK MODE] menu. (P127) ∫ Play back in 3D by selecting only the still pictures recorded in 3D Select [3D PLAY] in [MODE PLAY] in the [PLAYBACK MODE] menu. (P129) ∫ Switch the playback method for the still pictures recorded in 3D 1Select the picture recorded in 3D.2Select [2D/3D SETTINGS] on the [PLAYBACK MODE] menu and then press [MENU/SET]. (P46) • Playback method will switch to 3D if it is play ing back in 2D (conventional image), or it will switch to 2D if it is playing back in 3D. •If you feel tired, uncomfortable or otherwis e strange when playing back pictures recorded in 3D, set to 2D. Playing back 3D pictures For current information regarding devices that can play back 3D pictures recorded with this unit, please refer to the below support site. http://panasonic.jp/support/global/cs/dsc/ (This Site is English only.) Preparations: Set the [HDMI MODE] to [AUTO] or [1080i]. (P57) Set the [3D PLAYBACK] to [ ]. (P58)