Panasonic Dmc Fz47 Owners Manual

							- 41 -
Basic
You can create a single still picture from a recorded motion picture.
Press 3 to pause motion picture playback.
Press [MENU/SET].
•Confirmation screen is displayed. It is executed when [YES] is selected. 
Exit the menu after it is executed.
Note
•The picture is saved with the following recording sizes.
•You may not be able to save still pictures from a motion picture taken on other equipment.•Still pictures created from a motion picture may be coarser than with normal picture quality.
Creating Still Pictures from a Motion Picture
[AVCHD]Picture size[MP4]Picture size
[FSH]/[SH] 2 M (16:9) [FHD]/[HD]
2 M (16:9)
[VGA] 0.3 M (4:3) 
						

							Basic
- 42 -
Deleting Pictures
Once deleted, pictures cannot be recovered.
•Pictures on the built-in memory or the card, which are being played back will be deleted.•Pictures that are not in the DCF standard or those that are protected cannot be deleted.
Press [(].
To delete a single picture
Select the picture to be deleted, and then press [ ‚].
•Confirmation screen is displayed. 
Picture is deleted by selecting [YES]. 
						

							- 43 -
Basic
Note
•Do not turn the camera off while deleting. Use a battery with sufficient battery power or the AC 
adaptor (optional).
•Depending on the number of pictures to be deleted, it may take some time to delete them.
To delete multiple pictures (up to 50) or all the pictures
Press [‚ ].
Press  3/4 to select [DELETE MULTI] or [DELETE ALL] and then 
press [MENU/SET].
•[DELETE ALL]  > Confirmation screen is displayed. 
Pictures are deleted by selecting [YES].
•It is possible to delete all pictures except the ones set as favorite when 
[ ALL DELETE EXCEPT Ü] is selected with the [DELETE ALL] set.
(When [DELETE MULTI] is selected) 
Press  3/4/2/ 1 to select the picture, 
and then press [DISPLAY] to set.  
(Repeat this step.)
•[ ] appears on the selected pictures. If 
[DISPLAY] is pressed again, the setting is 
canceled.
(When [DELETE MULTI] is selected) Press [MENU/SET].
•Confirmation screen is displayed.
Pictures are deleted by selecting [YES]. 
						

							Basic
- 44 -
Setting the Menu
The camera comes with menus that allow you to choose the settings for taking pictures 
and playing them back as you like and menus that enable you to have more fun with the 
camera and use it more easily.
In particular, the [SETUP] menu contains some important settings relating to the camera’s 
clock and power. Check the settings of this menu before proceeding to use the camera.
∫ Types of menus
Menu Description of settings
! [REC]
  (P104  to 122)This menu lets you set the Coloring, Sensitivity, Aspect 
Ratio, Number of pixels and ot her aspects of the pictures 
you are recording.
 [MOTION PICTURE]
  (P123  to 126)This menu lets you set the [REC MODE], [REC 
QUALITY], and other aspects for motion picture 
recording.
 [PLAYBACK MODE]
  (P127  to 129)This menu lets you select the setting of the playback 
methods such as playback or slide show of only the 
pictures set as [FAVORITE].
( [PLAYBACK]
  (P130  to 145)This menu lets you set the Protection, Cropping or Print 
Settings, etc. of recorded pictures.
 [SETUP]
  (P48  to 59)This menu lets you perform the clock settings, select the 
operating beep tone settings and set other settings 
which make it easier for you to operate the camera. 
						

							- 45 -
Basic
∫Switching to other menus
e.g.: Switching to the [SETUP] menu from [REC] Mode menu
1Press [MENU/SET].
2Press  2.
3Press  4 or rotate the rear dial to select the 
[SETUP] menu icon [ ].
4Press  1 or the rear dial.
•Select a menu item next and set it. 
						

							Basic
- 46 -
•If you set [MENU RESUME] (P58) in the [SETUP] menu to [ON], the screen shows the last 
selected menu item when the camera was turned off.
It is set to [ON] at the time of purchase.
Example: In the [REC] menu, change [AF MODE] from [ Ø] (1-area-focusing) to [ š] 
(Face Detection)
Press [MENU/SET].
∫ Close the menu
Press [MENU/SET] or press the shutter button halfway.
Note
•
There are functions that cannot be set or used depending on the modes or menu settings being 
used on the camera due to the specifications.
Setting menu items
Press  3/4 or rotate the rear dial to select 
the menu item.
•Select the item at the very bottom, and press  4 or 
rotate the rear dial right to move to the next screen.
Press  1 or the rear dial.
•Depending on the menu item, its setting may not 
appear or it may be displayed in a different way.
Press 3/4 or rotate the rear dial to select 
the settings.
Press [MENU/SET] or the rear dial to set. 
						

							- 47 -
Basic
By using the Quick Menu, some of the menu settings can be easily found.
•The features that can be adjusted using Quick Menu are determined by the mode or a display 
style the camera is in. Items that cannot be used are displayed in gray.
Using the Quick Menu
Press [Q.MENU] when recording.
Press  3/4/2/ 1 to select the menu item 
and the setting and then press [MENU/
SET] to close the menu.
•You can set the following items in detail by pressing 
[DISPLAY].
[WHITE BALANCE]/[AF MODE] 
						

							Basic
- 48 -
About the Setup Menu
[CLOCK SET], [ECONOMY] and [AUTO REVIEW] are important items. Check their 
settings before using them.
For details on how to select the [SETUP] menu settings, refer to P46.
•
Refer to P22  for details.
•Setup/cancel of summer time [ ] can be performed by pressing  3 at the time the area is 
selected.
•The daylight saving time setting for the home area does not advance the current time. Advance 
the clock setting by one hour.
•If you cannot find the travel destination in the areas displayed on the screen, set by the time 
difference from the home area.
U  [CLOCK SET] —
 [WORLD TIME]
Set the time in your home area and travel destination.
You can display the local times at the travel destinations and 
record them on the pictures you take.
After selecting [DESTINATION] or [HOME], press 2/1  to 
select an area, and press [MENU/SET] to set.
•
Set [HOME] first thing after purchasing. [DESTINATION] can be set 
after setting up [HOME].
“  [DESTINATION]:
Travel destination area
A Current time of the destination area
B Time difference from home area
–  [HOME]:
Your home area
C Current time
D Time difference from GMT 
(Greenwich Mean Time)
B
A
D
C 
						

							- 49 -
Basic
•The number of days that have passed since the departure date can be printed out using the 
“PHOTOfunSTUDIO” bundled software on the CD-ROM (supplied).
•The travel date is calculated using the date in the clock setting and the departure date you set. 
If you set [WORLD TIME] to the travel destination, the travel date is calculated using the date in 
the clock setting and the travel destination setting.
•The travel date setting is memorized even if the camera is turned off.•The number of days that have passed since the departure date is not recorded before the 
departure date.
•[TRAVEL DATE] cannot be set for motion pictures recorded with [AVCHD].•[LOCATION] cannot be recorded when taking motion pictures.•[TRAVEL DATE] cannot be set in the Intelligent Auto Mode. Setting of other Recording Mode 
will be reflected.
— [TRAVEL DATE]
Departure date and return date of the travel as well as the name 
of the travel destination can be set.
You can display the number of days that have passed when 
playing back the pictures and stamp it on the recorded pictures 
with [TEXT STAMP] (P134) .
[TRAVEL SETUP]:
[OFF]: Elapsed days are not recorded.
[SET]: Departure date and return date are set. Elapsed days 
(how many days after) of the travel are recorded.
•
The travel date is automatically canceled if the current date is after 
the return date. If the [TRAVEL SETUP] is set to [OFF], [LOCATION] 
will be also set to [OFF].
[LOCATION]:
[OFF]
[SET]: Travel destination is recorded at the time of recording.
•
For details on how to enter characters, refer to “Entering Text” on 
P103 .
r [BEEP]
This allows you to set the beep and shutter sound.
r  [BEEP LEVEL]:
[s ] (Muted)
[t ] (Low)
[u ] (High)  [SHUTTER VOL.]:
[] (Muted)
[] (Low)
[] (High)
 [BEEP TONE]:
[]/[]/[]  [SHUTTER TONE]:
[]/[]/[]
123123 
						

							Basic
- 50 -
•When you connect the camera to a TV, the volume of the TV speakers does not change.
•Refer to P96 for details.
•Refer to P104 for details about the [REC] Mode menu.
•It will adjust the LCD monitor when the LCD monitor is in use, and the viewfinder when the 
viewfinder is in use.
•Some subjects may appear differently from actuality on the LCD monitor/viewfinder. However, 
this does not affect the recorded pictures.
u [VOLUME]Adjust the volume of the speaker to any of 7 levels.
 
[CUST. SET MEM.]Up to 3 current camera settings can be registered as custom 
settings.
[]/[ ]/[ ]
 
[Fn BUTTON SET]
Certain of the menus can be assigned to the 4  button. You may 
find it convenient to register a menu that you often use.
[PHOTO STYLE]/[ASPECT RATIO]/[QUALITY]/
[METERING MODE]/[WHITE BALANCE]/[I.DYNAMIC]/
[GUIDE LINE]/[ REC AREA]/[REMAINING DISP.]
  [LCD Display]/
[VIEWFINDER]
Brightness, color, or red or blue tint of the LCD monitor/viewfinder 
is adjusted.
1Select the settings by pressing 
3/ 4, and adjust with  2/1  or the 
rear dial.
2Press [MENU/SET] to set.