Panasonic Dmc Fz47 Owners Manual

							- 31 -
Basic
Applicable modes: 
Taking Pictures Using the Automatic Function 
(Intelligent Auto Mode)
The camera will set the most appropriate settings to match the subject and the recording 
conditions so we recommend this mode for beginners or those who want to leave the 
settings to the camera and take pictures easily.
•
The following functions are activated automatically.–Scene Detection/Backlight Compensation/Intelligent ISO sensitivity control/Auto White 
Balance/Face Detection/[QUICK AF]/[I.DYNAMIC]/[I.RESOLUTION]/[i.ZOOM]/
[STABILIZER]/[AF ASSIST LAMP]/[RED-EYE REMOVAL]/[CONTINUOUS AF]/[ZOOM MIC]
•Image quality is fixed to [A].
Set the mode dial to [ ].
Press the shutter button halfway to focus 
and then press it fully to take the picture.
A Focus indication•The AF area B  is displayed around the subject’s face 
by the Face Detection function. In other cases, it is 
displayed at the point on the subject which is in focus.
•You can set the AF tracking¢ by pressing [FOCUS]. 
For details, refer to  P114. (AF tracking is canceled by 
pressing [FOCUS] again.)
¢ You cannot use AF Tracking Function when 
[COLOR EFFECT] is set to [B/W] or [SEPIA].
CUSTM
CUSTM
AB 
						

							Basic
- 32 -
Following menus can be set.
•
For the setting method of the menu, refer to P46.
¢ Settings may be different from other Recording Modes.
•Menus specific to Intelligent Auto Mode–[COLOR EFFECT] can set the color effects of [STANDARD], [Happy], [B/W] or [SEPIA]. 
When [Happy] is selected, it is possible to automatically take a picture with a higher level of 
brilliance for the color brightness and vividness.
–When [MOTION DEBLUR] is set to [ON], [ ] is displayed on the recording screen. The 
camera automatically sets an optimal shutter speed according to the motion of the subject to 
reduce blur on the subject. (In such a case, the number of pixels may be reduced.)
∫About the flash
•Open the flash when the flash is to be used.  (P65)•When [ ] is selected, [ ], [ ], [ ] or [ ] is set depending on the type of subject 
and brightness.
•When [ ] or [ ] is set, Digital Red-Eye Correction is enabled.•Shutter speed will be slower during [ ] or [ ].
 Changing the settings
MenuItem
[REC][PICTURE SIZE]¢/[BURST]/[COLOR EFFECT]/
[MOTION DEBLUR]/[FACE RECOG.]
[MOTION PICTURE] [REC MODE]/[REC QUALITY]
[SETUP] [CLOCK SET]/[WORLD TIME]/[BEEP]
¢/[LANGUAGE]/
[STABILIZER DEMO.] 
						

							- 33 -
Basic
When the camera identifies the optimum scene, the icon of the scene concerned is 
displayed in blue for 2 seconds, after which its color changes to the usual red.
When taking pictures
When recording motion pictures
•
[¦ ] is set if none of the scenes are applicable, and the standard settings are set.•When [ ], [ ] or [ ] is selected, the camera automatically detects a person’s face, and it 
will adjust the focus and exposure.  (Face Detection)
•If a tripod is used, for instance, and the camera has judged that camera shake is minimal when 
the Scene Mode has been identified as [ ], the shutter speed will be set to a maximum of 
8 seconds.Take care not to move the camera while taking pictures.
•When [FACE RECOG.] is set to [ON], and the face similar to the registered face is detected, [R] 
is displayed in the top right of [ ], [ ] and [ ].
•Due to conditions such as the ones below, a different scene may be identified for the same 
subject.
–Subject conditions: When the face is bright or dark, the size of the subject, the color of the 
subject, the distance to the subject, the contrast of the subject, when the subject is moving
–Recording conditions: Sunset, Sunrise, Under lo w brightness conditions, When the camera is 
shaken, When zoom is used
•To take pictures in an intended scene, it is recommended that you take pictures in the 
appropriate Recording Mode.
•The Backlight Compensation–Backlight refers to when light comes from the ba ck of a subject. In this case, the subject will 
become dark, so this function compensates the backlight by brightening the whole of the 
picture automatically.
Scene Detection
¦
>[i-PORTRAIT] [i-SCENERY]
[i-MACRO] [i-NIGHT PORTRAIT]
¢1
[i-NIGHT SCENERY][i-SUNSET]
[i-BABY]
¢2
¢ 1 Only when [ ] is selected.
¢ 2 When [FACE RECOG.] is set to [ON], [ ] will be displayed for birthdays of 
registered faces already set only when the face of a person 3 years old or 
younger is detected.
¦>[i-PORTRAIT] [i-SCENERY]
[i-LOW LIGHT] [i-MACRO] 
						

							Basic
- 34 -
Applicable modes: 
Recording Motion Pictures
Note
•Built-in memory can only store data as the [VGA] of [MP4].•The available recording time displayed on the screen may not decrease regularly.•Depending on the type of the card, the card access indication may appear for a while after 
recording motion pictures. This is not a malfunction.
•Motion pictures cannot be recorded during [3D PHOTO MODE] in Scene Mode.•ISO sensitivity will operate as [AUTO] in Motion  Picture Recording other than Creative Video. 
Also, [ISO LIMIT SET] will not function.
•There is a risk that the sound of zoom and button operations and the rubbing of the lens cap 
string will be recorded, and so care is necessary.
•The screen may be blacked out momentarily, or the unit may record noise due to static 
electricity or electromagnetic waves etc. depending on the environment of the motion picture 
recording.
•When operating the zoom in recording motion pictures, it may take time to come into focus.•If the Extended Optical Zoom was used before pressing the motion picture button, those 
settings will be cleared, so the focus range will change dramatically.
•Even if the aspect ratio setting is the same in  still and motion pictures, the angle of view may 
change at the start of the motion picture recording.
When [ REC AREA]  (P52) is set to [ON], angle of view during motion picture recording is 
displayed.
•If you end motion picture recording after a short time when using [MINIATURE EFFECT] of the 
Creative Control Mode, the camera may go on recording for a certain period. Please continue 
to hold the camera until the recording finishes.
•It is recommended to use a fully charged battery or AC adaptor (optional) when recording 
motion pictures.
•If while recording motion pictures using the AC adaptor and the power supply is cut off due to a 
power outage or if the AC adaptor is disconnected etc., the motion picture being recorded will 
not be recorded.
Start recording by pressing the motion picture 
button.
A  Available recording time
B  Elapsed recording time
•You can record motion pictures fitting each Recording Mode.•Release the motion picture button right after you press it.•The recording state indicator (red)  C will flash while recording 
motion pictures.
•Focus can be achieved during recording by pressing [FOCUS].•It is recommended that you close the flash when recording 
motion pictures.
•For the setting of the [REC MODE] and [REC QUALITY], refer 
to  P123 .
Stop the recording by pressing the motion picture 
button again.
CUSTM
C
A
B 
						

							- 35 -
Basic
•It will be recorded in following categories for certain Recording Modes. A motion picture 
recording matching each Recording Mode will be performed for the ones not listed below.
Selected Recording ModeRecording Mode while recording motion picture
•Program AE Mode•Aperture-Priority AE Mode•Shutter-Priority AE Mode•Manual Exposure Mode•[SPORTS]•[PANORAMA ASSIST], [PET], 
[HI-SPEED BURST], [FLASH BURST], 
[FIREWORKS], [PHOTO FRAME] in Scene Mode Normal motion picture
•[OUTDOOR PORTRAIT], [INDOOR PORTRAIT] 
in [PORTRAIT]
•[BABY1]/[BABY2] in Scene Mode
Portrait Mode
•[NIGHT PORTRAIT]•[STARRY SKY] in Scene Mode
Low Light Mode
∫
About the recording format for recording motion pictures
This unit can record motion pictures in either AVCHD or MP4 formats.
AVCHD:
You can record high definition quality images with this format. It is suitable for viewing on 
a large format TV or for saving to disc.
MP4:
This is a simpler video format best used  when extensive editing is needed, or when 
uploading videos to the internet.
∫ About the compatibility of the recorded motion pictures
Motion pictures recorded in [AVCHD] or [MP4] may be played back with poor picture or 
sound quality or playback may not be possible even when played back with equipment 
compatible with these formats. Also, the recording information may not be displayed 
properly. In this case, use this unit.
•
There is no compatibility between [MP4] and [AVCHD] (including [AVCHD Lite]) formats.•For details on AVCHD and MP4 compatible dev ices, refer to the support sites below.http://panasonic.jp/support/global/cs/dsc/(This Site is English only.) 
						

							Basic
- 36 -
Still pictures can be recorded even while recording a motion picture. (simultaneous 
recording)
During motion picture recording, press the shutter button fully to record a 
still picture.
•The picture is saved with the following conditions.
Note
•During motion picture recording, if you press t he shutter button halfway, the camera will refocus 
and the refocus movement will be recorded to the motion picture being recorded. To prioritize 
the motion picture image, recording still pictures by fully pressing the shutter button, or creating 
still pictures after motion picture recording is recommended.  (P41)
•Recordable pixels and recordable number of pictures are displayed by pressing the shutter 
button halfway.
•Recording of motion picture will continue after taking the still picture.•The quality of pictures taken with simultaneous recording may differ compared to normal [3.5M] 
pictures.
•You can record up to 5 pictures per motion picture recording.•The flash setting is fixed to [Œ].•Zooming may stop when a picture is recorded while zooming.•Only one picture is recorded when Auto Bracket or White Balance Bracket is set.•Simultaneous recording is not possible in the following cases:–When [REC MODE] is set to [VGA] in [MP4]–In Creative Video Mode
Recording still pictures while recording motion pictures
[AVCHD]Picture size[MP4]Picture size
[FSH]/[SH] 3.5 M (16:9) [FHD]/[HD]3.5 M (16:9) 
						

							- 37 -
Basic
Playing Back Pictures ([NORMAL PLAY])
∫To finish playback
Press [
(] again, press the motion picture button or press the shutter button 
halfway.
Note
•
This camera complies with the DCF standard “D esign rule for Camera File system” established 
by JEITA “Japan Electronics and Information Technology Industries Association” and with Exif 
“Exchangeable Image File Format”. Files which do not comply with the DCF standard cannot 
be played back.
•The lens barrel retracts about 15 seconds after switching from Recording Mode to Playback 
Mode.
•Pictures recorded with other camera may not be able to play back on this unit.
Press [( ]. 
						

							Basic
- 38 -
Press 2 or 1.
AFile number
B Picture number
•Speed of picture forwarding/rewinding ch anges depending on the playback status.•If you press and hold 2/1, you can play back the pictures in succession.
Rotate the zoom lever towards [ L] (W).
1 screen >12 screens >30 screens >Calendar 
screen display
•
Rotate the zoom lever towards [ Z] (T) to return to the previous screen.•Pictures displayed using [ ] cannot be played back.
∫ To return to normal playback
Press  3/4 /2 /1  to select a picture and then press [MENU/SET].
Selecting a picture
2: Play back the previous picture
1 : Play back the next picture
Displaying Multiple Screens (Multi Playback)
C Number of the selected picture and the total number of 
recorded pictures
BA
WT
C 
						

							- 39 -
Basic
∫Switching the displayed image while maintaining the Playback Zoom
You can switch the displayed image while maintaining the same zoom magnification and 
zoom position for the Playback Zoom.
Rotating the rear dial to select the picture during Playback Zoom.
•
The zoom position returns to the center in the following images.–Images with different aspect ratios–Images with different numbers of recorded pixels–Images with a different rotation direction (when [ROTATE DISP.] is set to [ON])
∫ Enlarge the focus point (display focus point)
This unit will remember the focus point during the recording, and it can be enlarged with 
that point as a center.
Press [FOCUS] during image playback.
•
Focus point may not be the center of enlargement when it is at the edge of the image.•It will return to the original enlargement if [FOCUS] is pressed again.•Following pictures cannot be enlarged because there is no focus point:–Picture that was taken without focusing–Picture that was taken with Manual Focus–Picture that was taken with a different camera
Using the Playback Zoom
Rotate the zoom lever towards [ Z] (T).
1k > 2k> 4k> 8k > 16k
•When you rotate the zoom lever towards [ L] (W) after 
enlarging the picture, the magnification becomes lower.
•When you change the magnification, the zoom position 
indication  A appears for about 1 second, and the position of 
the enlarged section can be moved by pressing  3/4/ 2/1.
•The more a picture is enlarged, the more its quality 
deteriorates.A
WT 
						

							Basic
- 40 -
Playing Back Motion Pictures
This unit was designed to play motion pictures using the AVCHD, MP4 and QuickTime 
Motion JPEG formats that were taken with this model (only).
∫ Operations performed during Motion Picture Playback
The cursor displayed during playback is the same as  3/4 /2/ 1.
¢ The fast forward/rewind speed increases if you press  1/2 again.
Note
•When using a high capacity card, it is possible  that fast rewinding may be slower than usual.•To playback the motion pictures recorded by this unit on a PC, use the “QuickTime” or the 
“PHOTOfunSTUDIO” software on the CD-ROM (supplied).
•Motion pictures recorded with other camera may not be able to play back on this unit.•Motion pictures recorded with [MINIATURE EFFECT] in Creative Control Mode play back at 
approximately 10 times speed.
Press  2/1 to select a picture with a motion picture 
icon (such as [ ]/[ ]), and then press  3 to play 
back.
A Motion picture icon
B The motion picture recording time
•After playback starts, the elapsed playback time is displayed on the 
screen.
For example, 8 minutes and 30 seconds is displayed as [8m30s].
•Some information (recording information, etc.) is not displayed for 
motion pictures recorded in [AVCHD].
3Play/Pause
4Stop
2Fast rewind¢
Frame-by-frame rewind (while pausing)
1Fast forward¢
Frame-by-frame forward (while pausing)
[W]Reduce volume level
[T]Increase volume level
AB
WT