Panasonic Dmc G1 Operating Instructions Manual

51VQT1U32
Basic
You can display pictures by recording date.Note

The recording date of the picture selected in the playback screen becomes the date selected 
when the calendar screen is first displayed.
If there are multiple pictures with the same recording date, the first picture recorded on that day 
is displayed.
You can display the calendar between January 2000 and December 2099.If the date is not set in the camera, the recording date is set as January 1st, 2008.If you take pictures after setting the...

VQT1U3252
Basic
∫Switching the displayed image while maintaining the playback zoom
You can switch the displayed image while ma intaining the same zoom magnification and 
zoom position for the playback zoom.
Switch to picture select operation by pressing 
the front dial during playback zoom, and select 
pictures with  2/1.
It will switch between picture select operation and move 
zoom position operation every time the front dial is pressed 
during playback zoom.
Note
You can also delete the recording...

53VQT1U32
Basic
∫When [DELETE ALL] has been selected with the [FAVORITE] (P111) setting
The selection screen is displayed again. Select [DELETE ALL] or 
[ ALL DELETE EXCEPT Ü], press  3 to select [YES] and delete the pictures. 
([ALL DELETE EXCEPT Ü] cannot be selected if no pictures have been set as 
[FAVORITE].)
Note

Do not turn the camera off while deleting (while [ ‚] is displayed). Use a battery with a sufficient 
power or the AC adaptor (P132).
If you press [MENU/SET] while deleting pictures using...

VQT1U3254
Advanced (Recording pictures)
Advanced (Recording pictures)Switching the display of the LCD Monitor/
Viewfinder
Press [DISPLAY] to change.
When the menu screen appears, the [DISPLAY] button is not activated.
With the [LCD DISP.STYLE] (P105) of the [CUSTOM MENU] menu, you can choose the 
displayed screen on the LCD monitor to display in [ ] (LCD monitor style) or [ ] 
(viewfinder style).
When [ ] is set
When [ ] is set
Switching the displayed information
LCD monitor display
ANormal display¢1, 2...

55VQT1U32
Advanced (Recording pictures)
With the [LVF DISP.STYLE] (P105) of the [CUSTOM MENU] menu, you can choose the 
displayed screen on the viewfinder to display in [ ] (viewfinder style) or [ ] (LCD 
monitor style).
When [ ] is set
When [ ] is set
¢ 1 Guide lines are displayed when the [GUIDE LINE] of the [CUSTOM MENU] menu is set to 
anything except [OFF].
It is possible to move the position of the guide line using the quick menu when it is set to 
[ ]. (P56)
¢ 2 Histograms are displayed when the...

VQT1U3256
Advanced (Recording pictures)
∫Set the position of the guide line with [ ]
Set the [GUIDE LINE] in the [CUSTOM MENU] menu to [ ]. (P106)
1 Press [Q.MENU] to display the quick menu. (P29)
2 Press  2/1  to select guide line, and then press [MENU/
SET].

You can also use the front dial to set.Selected item will be displayed in orange in the quick menu 
screen, and the guide line itself will be displayed in orange when 
the guide line is selected.
3 Press  3/4 /2/ 1 to set the position.
4 Press...

57VQT1U32
Advanced (Recording pictures)
∫Set the position of the histogram
Set the [HISTOGRAM] in the [CUSTOM MENU] menu to [ON]. (P105)
1 Press [Q.MENU] to display the quick menu. (P29)
2 Press  2/1 to select histogram, and then press [MENU/
SET].

You can also use the front dial to set.Selected item will be displayed in orange in the quick menu 
screen, and the histogram itself will be displayed in orange when 
the histogram is selected.
3 Press  3/4/2 /1  to set the position.
4 Press [MENU/SET] to...

VQT1U3258
Advanced (Recording pictures)
[REC] mode: 
Taking Pictures using the Built-in Flash
ATo open the flashSlide the flash open lever.
BTo close the flashPress the flash until it clicks.
Be sure to close the flash when not in use.The flash setting is fixed to [ Œ] while the flash is 
closed.
Set the built-in flash to match the recording.
Open the flash.
Select [FLASH] in the [REC] mode menu. (P27)
Press 3/ 4 to select a mode and press [MENU/
SET].
For information about flash settings that can be...

59VQT1U32
Advanced (Recording pictures)
¢The flash is activated twice. The interval between the first and second flash is longer 
when [ ], [ ] or [ ] is set. The subject should not move until the second 
flash is activated.
Flash interval depends on the brightness of the subject.
∫About the digital red-eye correction
When the flash is used with the Red-eye reduction ( [ ], [ ], [ ] ) selected, it will 
automatically detect and correct the red-eye in the image data. 

It may not be able to correct the...

VQT1U3260
Advanced (Recording pictures)
The flash setting may change if the recording mode is changed. Set the flash setting again if 
necessary.
The flash setting is memorized even if the camera is turned off. However, the advanced scene 
mode or the scene mode flash setting is reset to the initial setting when the advanced scene 
mode or the scene mode is changed.
∫The available flash range to take pictures
The available flash range is an approximation.
¢ When the [ISO LIMIT SET] (P104) is set to...