Panasonic Dmp Bd45 Operating Instructions

							21VQT2H86
Playback
Linked operations with 
the TV 
(VIERA LinkTM “HDAVI ControlTM”)
Preparation
1Set “VIERA Link” to “On” (>27). (The default setting is 
“On”.)
2Set the “HDAVI Control” operations on the connected 
equipment (e.g., TV).
3Turn on all “HDAVI Control” compatible equipment and 
select this unit’s input channel on the connected TV so 
that the “HDAVI Control” function works properly.
Also when the connection or settings are changed, 
repeat this procedure.
When the following operations are performed, the television 
will automatically switch the input channel and display the 
corresponding action. When the television is off, the television 
will automatically turn on.
– When play starts on the unit
– When an action that uses the display screen is performed
(e.g., Direct Navigator screen)
All connected equipment compatible with “HDAVI Control”, 
including this unit, automatically turns off when you switch the 
television off.
Playing music continuously even after turning off power 
to the television
When the unit is connected to a Panasonic TV (VIERA) that 
supports HDAVI Control 2 or later and an amplifier/receiver 
supports VIERA Link. 
1While playing music
Press [SUB MENU].
2Press [3,4] to select “TV Power” and press [OK].Only TV supports “HDAVI Control 2” or later
By using the TV remote control, you can play discs using the 
“Control Panel” and display the Top Menu or Pop-up Menu, 
etc.
1Press [SUB MENU].
2Select an item, then 
press [OK].
≥The sub menu may not appear 
while the Top Menu for BD-Video or DVD-Video is 
displayed.
	≥The buttons that you can use for this unit vary depending on the TV. For 
details, refer to the operating instructions of the TV.
≥The operation of this unit may be interrupted when you press incompatible 
buttons on the TV remote control.
≥This unit supports “HDAVI Control 5” function.
“HDAVI Control 5” is the newest standard (current as of December, 2009) 
for Panasonic’s HDAVI Control compatible equipment. This standard is 
compatible with Panasonic’s conventional HDAVI equipment.
≥VIERA Link “HDAVI Control”, based on the control functions provided by 
HDMI which is an industry standard known as HDMI CEC (Consumer 
Electronics Control), is a unique function that we have developed and 
added. As such, its operation with other manufacturers’ equipment that 
supports HDMI CEC cannot be guaranteed.
≥Please refer to individual manuals for other manufacturers’ equipment 
supporting VIERA Link function.
Automatic input switching
Power on link
Power off link
What is VIERA Link “HDAVI Control”?
VIERA Link
TM is a new name for EZ SyncTM.
VIERA Link “HDAVI Control” is a convenient function 
that offers linked operations of this unit, and a 
Panasonic TV (VIERA) or amplifier/receiver under 
“HDAVI Control”. 
You can use this function by connecting the 
equipment with an HDMI cable. See the operating 
instructions for connected equipment for operational 
details.
Easy control only with VIERA 
remote control
Control Panel
Screen Aspect
Top Menu
Pop-up Menu
SUB
MENUOKRETURN
VQT2H86~Body_eng.fm  21 ページ  ２０１０年１月１８日　月曜日　午前１０時２５分 
						

							22VQT2H86
Enjoying VIERA CASTTM 
[BD65] [BD655]
You can access a selection of Internet services from the 
Home screen with VIERA CAST, for example YouTube, 
Picasa Web Albums. (Current as of December 2009)
Preparation≥Network connection (>10)
≥Network setting (>12)
1Press [VIERA CAST].
Message is displayed. Please read these instructions 
carefully and then press [OK].
2Press [3,4,2,1] to select the item and 
press [OK].
Operable buttons: 
[3,4,2,1], [OK], [RETURN], colored buttons, 
numbered buttons
VIERA CAST Home screen;
To return to VIERA CAST Home screen
Press [VIERA CAST].
To exit from VIERA CAST
Press [EXIT], [FUNCTION MENU] or [TOP MENU/DIRECT 
NAVIGATOR].
	≥In the following cases, settings are possible using “Internet Content 
Settings” (>28)
– When restricting the use of VIERA CAST.
– When the audio is distorted.
– When wrong time is displayed
≥If using slow Internet connection, the video may not be displayed 
correctly. A high-speed Internet service with a speed of at least 6 Mbps is 
recommended.
≥Be sure to update the firmware when a firmware update notice is 
displayed on the screen. If the firmware is not updated, you will not be 
able to use the VIERA CAST
TM function. (>14)
≥VIERA CASTTM home screen is subject to change without notice.
≥The services through VIERA CASTTM are operated by their respective 
service providers, and service may be discontinued either temporarily or 
permanently without notice. Therefore, Panasonic will make no warranty 
for the content or the continuity of the services.
≥All features of websites or content of the service may not be available.
≥Some content may be inappropriate for some viewers.
≥Some content may only be available for specific countries and may be 
presented in specific languages.
Featured VideosFeatured Photos
Weather28ÃNew York, NY
W 17mphSettings
BloombergXXX
XXX
XXX7465.95
778.94
1442.82-89.68
-9.47998
-25.15TELEVISION15min. delayTop Movie Rental
   XXXXXX
Top TV Show
   XXXXXX
COMING SOON
COMING
SOON
Images are for illustration purposes, contents may 
change without notice.
DMP-BD65_45_VQT2H86_eng.book  22 ページ  ２００９年１２月５日　土曜日　午後７時１７分 
						

							23VQT2H86
Playback
Settings
Settings
Playback menu
1Press [DISPLAY].
2Press [3,4] to select the menu and press 
[1].
3Press [3,4,2,1] to select the item and 
press [1].
4Press [3,4] to select the setting.
Some items can be changed by pressing [OK].
To exit the screen
Press [DISPLAY].
Depending on the condition of the unit (playing, stopped, 
etc.) and media contents, there may be some items that 
you cannot select or change.
Regarding Language, Audio attribute and video attribute : 
(>37)
Signal Type
Video
The recording method of original video appears.
Soundtrack
Show or change the soundtrack.
Subtitle
Turn the subtitle on/off, and change the language depending 
on the media.
Subtitle Style
Select the subtitle style.
Audio channel
Select the audio channel number.
(>17, “Changing audio”)
Angle
Select the number of the angle.
Some items may be changed only on the disc specific menu. 
(>16)
Video
Audio
Play
Disc
Subtitle StyleAngle
SubtitleOff Main1ENG
- -
Signal Type
Menus Items Settings e.g., BD-Video
Disc
Primary Video
VideoThe recording method of original video 
appears.
SoundtrackSelect the type of audio or language.
Secondary Video
VideoSelect on/off of images. The recording 
method of original video appears.
SoundtrackSelect on/off of audio and the language.
DMP-BD65_45_VQT2H86_eng.book  23 ページ  ２００９年１２月９日　水曜日　午後８時５１分 
						

							24VQT2H86
Repeat Play
(Only when the elapsed time is being displayed on the unit’s 
display.)
Select the item which you want to repeat. The items displayed 
differ depending on the type of media.
Select “Off” to cancel.
Random
Select whether or not to play random.
Picture
Select the picture quality mode during play.
≥If you select “User”, you can make further adjustments. 
Press [1] to select “Picture Adjustment” and press [OK].
	≥3D NR:
Reduces the rough noise in the background to give a greater feeling of 
depth.
When “24p Output” is set to “On”, this function may not operate. (
>27)
≥Integrated NR:
Smoothes block noise and reduces the smudging that appears around 
contrasting sections of the picture.
Detail ClarityThe picture is sharp and detailed.
Progressive
Select the method of conversion for progressive output to suit 
the type of material being played.
≥When the content is distorted change the settings from 
“Auto“ to “Video”.
24p
Movies and other material recorded on DVD-Video at 24p are 
output at 24p.
≥Only when you have selected “On” in “24p Output” (>27)
Sound Effects*1, *2
Select the sound effect.
≥Re-master : (>17)
≥Night Surround :
Enjoy a movie with powerful sound even when the volume is 
kept low at night. The audio is set in such a way that it can 
be heard easily.
Dialog Enhancer*2
The volume of the center channel is raised to make dialog 
easier to hear.
*1Not every function can be set individually.*2This function is effective for audio from the HDMI terminal or the OPTICAL 
terminal only when “Digital Audio Output” is set to “PCM” (>26). 
(However, in this case, audio is output as 2ch from the OPTICAL 
terminal.)
Play
Video
Audio
DMP-BD65_45_VQT2H86_eng.book  24 ページ  ２０１０年１月１８日　月曜日　午前１０時８分 
						

							25VQT2H86
Settings
Setup menu
Change the unit’s settings if necessary. The settings remain 
intact even if you switch the unit to standby.
1Press [FUNCTION MENU] and press 
[3,4] to select “Other Functions” and 
press [OK].
2Press [3,4] to select “Setup” and press 
[OK].
3Press [3,4] to select the menu and press 
[OK].
4Press [3,4] to select the item and press 
[OK].
If there are any other items, repeat these steps.
5Press [3,4,2,1] to select the option 
and press [OK].
≥There may be differences in operation methods. If this happens, follow the 
on-screen instructions for the operation.
DVD-Video Ratings
Set a ratings level to limit DVD-Video play.
≥Follow the on-screen instructions. Enter a 4-digit password 
with the numbered buttons when the password screen is 
shown. 
BD-Video Ratings
Set an age limit of BD-Video play.
≥Follow the on-screen instructions. Enter a 4-digit password 
with the numbered buttons when the password screen is 
shown. 
Audio Language
Choose the language for audio.
≥If “Original” is selected, the original language of each disc 
will be selected.
≥Enter a code (>37) with the numbered buttons when you 
select “Other ¢¢¢¢”.
Subtitle Language
Choose the language for subtitle.
≥If “Automatic” is selected and the language selected for 
“Audio Language” is not available, subtitles of that language 
will automatically appear if available on that disc.
≥Enter a code (>37) with the numbered buttons when you 
select “Other ¢¢¢¢”.
Menu Language
Choose the language for disc menus.
≥Enter a code (>37) with the numbered buttons when you 
select “Other ¢¢¢¢”.
BD-Live Internet Access [BD65] [BD655] (>18)
You can restrict Internet access when BD-Live functions are 
used. 
≥If “Allow (Limited)” is selected, Internet access is permitted 
only for BD-Live contents which have content owner 
certificates.
About the password
The password of the following items are common.
Don’t forget your password.
≥“DVD-Video Ratings”
≥“BD-Video Ratings”
≥“Lock” (>28)
OKRETURN
Setup
Disc
Video
Audio
Display
TV / Device Connection
Network
Others
Disc
DMP-BD65_45_VQT2H86_eng.book  25 ページ  ２００９年１２月５日　土曜日　午後７時１７分 
						

							26VQT2H86
Still Mode (paused video)
Select the type of picture shown when you pause playback.
Seamless Play
The chapters segment in playlists are played seamlessly.
≥Select “On”, when the picture freezes for a moment at the 
chapters segment in playlists.
Black Level Control
Select lighter or darker for adjusting the black level control to 
the desired setting for picture enhancement.
Dynamic Range Compression
You can listen at low volumes but still hear dialog clearly.
(Dolby Digital, Dolby Digital Plus and Dolby TrueHD only)
≥“Auto” is effective only when playing Dolby TrueHD.
Digital Audio Output (>32)
Press [OK] to show the following settings.
PCM Down Conversion
Select how to output audio with a sampling frequency of 
96 kHz for the PCM output from the DIGITAL AUDIO OUT.
≥If “On” is selected, the signals that are converted to 48 kHz 
are output.
≥If “Off” is selected, and the connected equipment does not 
support 96 kHz, the sound will not be output normally.
≥Signals are converted to 48 kHz despite the settings across 
in the following cases:
– when the signals have a sampling frequency of 192 kHz
– when the disc has copy protection
– when “BD-Video Secondary Audio” is set to “On”
Downmix
Select the downmix system of multi-channel to 2 channel 
sound.
≥Select “Surround encoded”, when the connected equipment 
supports the virtual surround function.
≥There is no effect on “Bitstream” via HDMI AV OUT and 
DIGITAL AUDIO OUT.
≥The audio will be output in “Stereo” in the following cases.
– AVCHD playback
– Playback of secondary audio (including the button click 
sound).
7.1ch Audio Reformatting [BD65] [BD655]
Surround sound with 6.1ch or less is automatically expanded 
and played back at 7.1ch.
≥If “Off” is selected, sound is played over the original number 
of channels. (Note that in the case of 6.1ch audio, playback 
will be at 5.1ch.)
Audio reformatting is enabled in the following cases:
≥When you have selected “PCM” in “Digital Audio Output”.
≥When the audio is Dolby Digital, Dolby Digital Plus, Dolby 
TrueHD or LPCM.
Status Messages
Choose whether to show status messages automatically.
On-screen Language
Choose the language for these menus and on-screen 
messages.
Screen Saver Function
This is to prevent burn-in on the screen.
≥When this is set to “On”:
If there is no operation for 10 minutes or more, Direct 
Navigator screen switches to FUNCTIONS screen 
automatically.
≥While playing and pausing, etc., this function is not 
available.
≥As for Music [CD-DA] or MP3, regardless of the setting, if 
there is no operation for a while, Direct Navigator screen 
switches to the other states automatically.
FL Display
Changes the brightness of the unit’s display.
≥If “Auto” is selected the display is dimmed during playback 
and bright except during playback.
License
Information about the software used by this unit is displayed. 
Video
AutoAutomatically selects the type of picture shown.
FieldSelect if jittering occurs when “Auto” is selected.
FrameSelect if small text or fine patterns cannot be seen 
clearly when “Auto” is selected.
Audio
Dolby D/Dolby D +/Dolby TrueHD
DTS/DTS-HD
Select the audio signal to output.≥Select “PCM”, when the connected equipment cannot 
decode the respective audio format.
≥Not making the proper settings may result in noise.
BD-Video Secondary AudioSelect whether to mix or not mix the primary audio and
secondary audio (including the button click sound). (>18)
≥If “Off” is selected, the unit outputs the primary audio only.
Display
DMP-BD65_45_VQT2H86_eng.book  26 ページ  ２００９年１２月９日　水曜日　午後８時５１分 
						

							27VQT2H86
Settings
TV Aspect
Set to match the type of television connected.
HDMI Connection
Press [OK] to show the following settings.
Component Video Resolution [BD65] [BD655]
This sets the video output resolution when connected via the 
COMPONENT VIDEO OUT terminal.
≥
Even if you select “720p” or “1080i”, the video output 
resolution is restricted to “480p” when images of DVD-Video 
discs are output from the COMPONENT VIDEO OUT 
terminals.
TV / Device Connection
When connected to a 4:3 aspect television and playing 16:9 
ratio image:
4:3 Pan & 
Scan
The sides are cut off so 
the picture fills the screen. 
When playing BD-Video, 
video is output as “4:3 
Letterbox”.
4:3 Letterbox
Black bands appear at the 
top and bottom of the 
picture.
When connected to a 16:9 widescreen television and 
playing 4:3 ratio image:
16:9Video is displayed as a 4:3 ratio image in the 
center of the screen.
16:9 FullVideo is displayed as a horizontally 
stretched 16:9 image.
HDMI Video Mode [BD65] [BD655]
Select “On” when video is output from HDMI AV OUT 
terminal.
OnImages are output from the HDMI terminal in the 
resolution set in “HDMI Resolution”.
OffImages are output in the resolution set in 
“Component Video Resolution”.
HDMI ResolutionThe items supported by the connected devices are 
indicated on the screen as “¢”. When any item without “¢” 
is selected, the images may be distorted.
≥If “Auto” is selected, automatically selects the output 
resolution best suited to the connected television.
≥To enjoy high definition video up-converted to 1080p, you 
need to connect the unit directly to 1080p compatible 
HDTV (High Definition Television). If this unit is connected 
to an HDTV through other equipment, it must also be 
1080p compatible.
24p OutputWhen this unit is connected to a TV supporting 1080/24p 
output using an HDMI cable, movies and other material 
recorded at 24p are output at 24p.
≥When playing DVD-Video, set to “On” and then also set 
“24p” in “Video” (>24) to “On”.
≥When BD-Video images other than 24p are played, 
images are output at 60p.
HDMI RGB Output RangeThe signal is enhanced to reproduce clear video, when 
connected to a device that only supports RGB output.
HDMI Audio OutputThis setting selects whether or not to output audio from 
HDMI.
≥Select “Off” when the TV is connected to this unit via an 
HDMI terminal, and this unit is also connected to other 
devices, such as an amplifier/receiver via an OPTICAL 
terminal.
VIERA LinkSet to use “HDAVI Control” function when connected with 
an HDMI cable to a device that supports “HDAVI Control”.
≥Select “Off” when you do not want to use “HDAVI Control”.
Deep Color OutputThis setting is for selecting whether to use Deep Color 
output when a television that supports Deep Color is 
connected.
Contents Type FlagDepending on the playback content, the TV will output 
adjusting to the optimal method when a TV that supports 
this function is connected.
DMP-BD65_45_VQT2H86_eng.book  27 ページ  ２００９年１２月５日　土曜日　午後７時１７分 
						

							28VQT2H86
Network Easy Setting (>12)
Network Settings
Perform network-related settings individually.
Press [OK] to show the following settings.
Off Timer
Select how long the unit remains on when it is not being used.
Remote Control Code
Change the remote control code, when other Panasonic 
products react to this remote control.
Quick Start
Speed of startup from power off is increased.
≥Internal control unit will be powered when it is set to “On”, so 
contents of the following will be different from the time it is 
set to “Off”.
– Idle power consumption will increase. (about the power 
consumption  >36)
Easy Setting
You can execute basic settings (“On-screen Language”, “TV 
Aspect”, “Quick Start”)
Restore Default Settings
This returns all values in the Setup menu and the  playback 
menu, except for “Remote Control Code”, “On-screen 
Language”, “IP Address/DNS Settings”, “Proxy Server 
Settings”, “Lock” [BD65]  [BD655] , “DVD-Video Ratings” and 
“BD-Video Ratings” to the default settings.
System Information
Display firmware version of this unit, wireless LAN module of 
your Wireless LAN Adaptor  [BD65] [BD655] .
Firmware Update [BD65] [BD655] (>14)
Press [OK] to show the following settings.
Network [BD65] [BD655]
LAN Connection ModeSelect connection method.
Access Point Connection SettingThis allows the Wireless router (Access point) and 
connection settings to be set and the current connection 
settings and connection state to be checked when a 
wireless connection is used.
Connection Setting
The Wireless router (Access point) connection wizard will 
be displayed.
IP Address/DNS SettingsThis is for checking the state of the network connection and 
setting the IP address and DNS-related.
Press [OK] to show the respective setting.
≥“Connection Speed Setting is enabled only when “Auto 
Detect Connection Speed” is turned “Off”.
Proxy Server Settings
This is for checking the state of connection with the Proxy 
server and performing settings.
Press [OK] to show the respective setting.
Internet Content Settings (>22) (VIERA CAST)
Press [OK] to show the following settings.
Lock
You can restrict the usage of VIERA CAST.
≥Follow the on-screen instructions. Enter a 4-digit 
password with the numbered buttons when the 
password screen is shown. 
Audio Auto Gain Control
Volume that is different depending on the contents is 
adjusted automatically to the standard volume while using 
the VIERA CAST.
≥ Depending on contents, this function effect will not 
work.
≥ Select “Off” when the audio is warped.
Time Zone
By selecting the time zone, it is possible to set the unit’s 
time to match your location.
≥ Some VIERA CAST contents require the time zone to 
be set. Set the time zone if necessary.
DST
Select “On” when using Daylight Saving time.
MAC Address
Displays the MAC address of this unit.
Others
Automatic Update CheckWhen this equipment remains connected to the Internet, it 
will check for the latest firmware version when it is turned on 
and you can update it if necessary.
Update NowYou can update the firmware manually.
VQT2H86~Body_eng.fm  28 ページ  ２００９年１２月１１日　金曜日　午前１０時３５分 
						

							29VQT2H86
Settings
Reference
Reference
Troubleshooting guide
Before requesting service, please perform the 
following steps.
The following do not indicate a problem with this unit:
≥Regular disc rotating sounds.
≥Image disturbance during search.
∫Unit doesn’t respond to remote control 
or front panel buttons.
Press and hold [POWER Í/I] on the main unit for 3 seconds.
– If still unable to power the unit off, disconnect the power 
cord, wait 1 minute, then reconnect the power cord.
∫Cannot eject disc.
The unit may have a problem.
1While the unit is off, press and hold [OK], [B] and [Y] on 
the remote control at the same time for more than 
5 seconds.
– “00 RET” is displayed on the unit’s display.
2Repeatedly press [1] (right) on the remote control or 
[POWER Í/I] on the unit until “06 FTO” is displayed on 
the units display.
3Press [OK] on the remote control or [28)
To return all settings to the factory preset.
¾Reset the unit as follows:
1While the unit is off, press and hold [OK], [B] and [Y] on 
the remote control at the same time for more than 
5 seconds.
– “00 RET” is displayed on the unit’s display.
2Repeatedly press [1] (right) on the remote control or 
[POWER Í/I] on the unit until “08 FIN” is displayed on the 
units display.
3Press and hold [OK] on the remote control or [28)
¾It may be necessary to set the manufacturer code or the 
remote control code again after changing the batteries for 
remote control. (>14)
The TV tuner mode is not displayed when the 
TV is switched on.
¾This phenomenon may occur, depending on the TV 
setting, when “Quick Start” is set to “On”.
– Depending on the TV, this phenomenon may be prevented 
by reconnecting the HDMI cable to a different HDMI input 
terminal or by changing the HDMI auto connection setting.
You have forgotten your ratings password.
You want to cancel the ratings level.
¾The ratings level returns to the factory preset.
1While the unit is on, press and hold [OK], [B] and [Y] on 
the remote control at the same time for more than 
5 seconds.
– “00 RET” is displayed on the unit’s display.
2Repeatedly press [1] (right) on the remote control or 
[POWER Í/I] on the unit until “03 VL” is displayed on the 
units display.
3Press [OK] on the remote control or [14)
4
Make the following checks and visit our 
website for more information.
For USA : 
http://www2.panasonic.com/consumer-electronics/support/
Enter the model number.
For Canada : 
http://www.panasonic.ca
4
Even so, you still have trouble,
Visit our website to find a service center.You can find a service center near you easily on our 
website.
Other support information:
“Customer Services Directory (United States and Puerto 
Rico)” (>39) or “Limited Warranty (Only for 
CANADA)” (>40).
General operation
DMP-BD65_45_VQT2H86_eng.book  29 ページ  ２００９年１２月９日　水曜日　午後８時５１分 
						

							30VQT2H86
The images from this unit do not appear on 
the television.
Picture is distorted.
¾An incorrect resolution is selected in “Component Video 
Resolution” [BD65] [BD655] or “HDMI Resolution”. Reset 
the setting as follows:
1While the unit is on, press and hold [OK], [B] and [Y] on 
the remote control at the same time for more than 
5 seconds.
– “00 RET” is displayed on the unit’s display.
2Repeatedly press [1] (right) on the remote control or 
[POWER Í/I] on the unit until “04 PRG” is displayed on 
the units display.
3Press and hold [OK] on the remote control or [27)
– When Dolby Digital Plus, Dolby TrueHD, and DTS-HD audio 
are not output in bitstream, select “Yes” in “Restore Default 
Settings” and make proper settings. (>28)
Video is not output in high definition.
¾Confirm that the “HDMI Video Mode” [BD65] [BD655], 
“HDMI Resolution”, and “Component Video Resolution” 
[BD65] [BD655] in the Setup menu are set properly. (>27)
No subtitles.
¾When progressive output is on, closed captions cannot be 
displayed.
The subtitles overlap closed captions 
recorded on discs.
¾Turn off the subtitles or turn off the closed caption setting 
on the TV. (>23)
A black band is displayed around the edge of 
the screen.
The aspect ratio of the screen is abnormal.
¾Confirm the “TV Aspect” is set properly. (>27)¾Adjust the aspect setting on the television.
(Adjustment using “Screen Aspect” (>17) on the unit is 
also possible)
Cannot switch audio.
¾When connecting an amplifier/receiver using an OPTICAL 
terminal or an HDMI terminal, you cannot switch the audio 
if “Digital Audio Output” is set to “Bitstream”. Set “Digital 
Audio Output” to “PCM” or connect using AUDIO OUT 
terminal. (>9, 26)
Cannot hear the desired audio type.
¾Check the connections and the “Digital Audio Output” 
settings. (>26)
¾To output audio from a device connected with an HDMI 
cable, set “HDMI Audio Output” to “On” in the Setup 
menu. (>27)
Disc cannot be played.
¾The disc is dirty. (>4)
The contents of the USB device cannot be 
read. 
[BD65] [BD655]
¾USB devices connected using USB extension cable other 
than the included with the Wireless LAN Adaptor 
DY-WL10 (optional) or a USB hub may not be recognized 
by this unit.
¾If inserted during playback the USB device may not be 
recognized by this unit.
Still pictures (JPEG) do not play back 
normally.
¾The images that were edited on the PC, such as 
Progressive JPEG, etc., may not play back.
I can’t play back BD-Live. [BD65] [BD655]
¾The SD card is write-protected. (>7)¾Confirm that this unit is connected to the broadband 
Internet. (>10)
¾Confirm the “BD-Live Internet Access” settings. (>25)¾Confirm an SD Card is inserted into the SD Card slot. 
(>15)
I can’t connect to the network.
¾Confirm the network connection and settings. (>10, 28)¾Check the operating instructions for each device and 
connect accordingly.
PictureAudio
Playback
Network [BD65] [BD655]
DMP-BD65_45_VQT2H86_eng.book  30 ページ  ２０１０年１月１８日　月曜日　午前１０時８分