Panasonic DP 3530 User Manual

							51
Making Copies
or Same vertical and
horizontal ratio
25% - 400%
or
or KeypadDifferent vertical and
horizontal ratio
25% - 400%
or
or Keypad
or
Number
of Copies
Number
of CopiesFit to paper length or
width
Fit to paper length
and width
Paper Size
(Paper Tray)
or Same vertical and
horizontal void value
5 - 99 mm
or
or KeypadDifferent vertical and
horizontal void value
5 - 99 mm
or
or Keypad
or
Number
of Copies
Number
of Copies5 - 99 mm
or
or Keypad
NOTE●Zoom Ratio
If using the keypad to set the zoom ratio,  press the CLEAR key first to reset the current zoom
ratio.
3
4
345
3
4
34
Downloaded From ManualsPrinter.com Manuals 
						

							52
Making Copies
Zoom/Effects
■ Margin
Shifts image to right, left, up or down.
or
■ Centering
Copy image can be centered automatically on
selected paper.
Opening the ADF
■ Image Repeat
Creates continuous copy image on one sheet.
Minimum original size: 20 x 20 mm
Opening the ADF
The dotted line can be set to
“None” or “Print” by Function mode
(See page 67).
■ Inverse
Negative/Positive image can be created for
special effects.
or
NOTE●In Centering and Image Repeat mode, make copies with the ADF open.
●Remove the originals from the ADF before selecting the Centering and Image Repeat mode.
An incorrect position detection of the original may occur when a strong light shines onto the
glass during the Centering and Image Repeat mode.
Also an image which the copier interprets as a black pattern in the Centering and Image
Repeat modes.
12
12
12
12
Downloaded From ManualsPrinter.com Manuals 
						

							53
Making Copies
or
Number
of Copies
or Keypad Margin area5 - 99 mm
If a part of the copied image
is missing when using the
Margin mode, change the
Margin Reduction setting to
Yes. (See page 67)
Number
of CopiesPaper Size
(Paper Tray)
Number
of CopiesPaper Size
(Paper Tray)
Number
of Copies
34
34
34
3
Downloaded From ManualsPrinter.com Manuals 
						

							54
Making Copies
Zoom/Effects
■ Stamping (Page Numbering)
Page numbers can be automatically stamped
on each page.
1/8-1-
ADF only∗
■ Stamping (Date Stamp)
The date can be automatically stamped on each
page.
ADF only∗
■ Stamping (Issue Number Stamping)
An issue number can be automatically stamped
on each page.
ADF only∗
01/05/2003
001
NOTE∗When copying with the Stamping mode combined with N in 1 mode, the Stamping mode can be
used from the platen. The page numbering
format can be changed in
function mode.
Default format is -n-.
(See page 67)
12
12
12
Downloaded From ManualsPrinter.com Manuals 
						

							55
Making Copies
DP-6030
Number of Copies
(Max. 999)
●Multiple copy sets will be
sorted automatically.
ORIENTATION
Stamping position
or
Stamping start page
From 1, 2 or 3
DP-6030
Number of Copies
(Max. 999)
●Multiple copy sets will be
sorted automatically.
ORIENTATION
Stamping position
Changing the stamp date
DP-6030
Number of Copies
(Max. 999)
●Multiple copy sets will be
sorted automatically.
ORIENTATION
Stamping position
Stamping the Issue Number
From 3rd page
From 2nd page
From 1st page
or
or
34
34
34
or
Keypad
Downloaded From ManualsPrinter.com Manuals 
						

							56
Making Copies
Insertion/Overlay
OHP2 21
+(2)(1)
+
OHP(2)OHP2OHP(1)(2)(1)21
+(2)(1)
+
OHP1
OHP1
OHP2 21
+
OHP(2)OHP2OHP(1)(2)(1)21
+
OHP1
OHP1
+
+
InsertionInsertion
■ Cover
Adds Cover Page(s) to copies.
Blank page
Copied page
2 211+
3243+4
121
Original Blank
page
Original Copied
pageCopied
page
ADF only
■ Page Insertion
Inserts Blank/Copied pages between copies.
Blank page
Copied page
Original Blank
page
Original Copied
page
ADF only
■ OHP Interleaving
Inserts Blank/Copied pages between OHP film.
Blank page
Copied page
Original Blank
page
Original Copied
page
ADF only
■ Presentation
Inserts Blank/Copied pages between OHP film
and make copied sets for handouts.
Blank page
Copied page
Original Blank
page
OriginalCopied
page
ADF only
NOTE●Certain types of transparency film may not be compatible and may damage your machine.
Consult with an authorized Panasonic dealer for advice regarding non-standard paper types.
(Panasonic has tested  3M PP2500 transparency film and found it to be compatible.)
Hand-
outs
Hand-
outs
12
12
12
12
Downloaded From ManualsPrinter.com Manuals 
						

							57
Making Copies
Paper Size∗
Paper Tray Cover Page mode
Cover (Front) Cover (Front+Back)
Blank
CopyNumber of Copies
(Max. 999)
Paper Size∗
Paper Tray Page Insertion mode
Blank
CopyNumber of Copies
(Max. 999)
Paper Size∗
Paper Tray OHP Interleaving mode
Blank
Copy
Number of Copies
(Max. 999)
Paper Size∗
Paper Tray Presentation mode
Blank
CopyNumber of Copies
for handouts
(Max. 999)
Set the insert page position with
Keypad∗∗
If selecting other position, move
the sheet with 
 /  button, then
set the insert page position with Keypad
NOTE∗The size and orientation of the printed copy and recording paper should match.
∗∗Blank page to be inserted before the indicated selected page number.
Load OHP film onto
the Sheet Bypass
Load OHP film onto
the Sheet Bypass
34
345
435
435
Downloaded From ManualsPrinter.com Manuals 
						

							58
Making Copies
Insertion/Overlay
■ Overlay
Overlays a second image onto the first by using
a second original.
1st-page
■ File Edit
Up to three∗
 editing functions
available in the Form Overlay
feature.
∗
:To Add a new file∗
(HDD = Max. 5 files)
∗
:To Erase a
registered file
∗
:To Change the
title of a file
or
(Register only)
Select a file
■ Form Overlay
Overlay an image stored in memory onto the copy.
or
File
NOTE●The File Edit function for selecting a file is only available when the optional Hard Disk Drive
(See page 81) is installed.
When the optional Hard Disk Drive is not installed, only one file can be selected.
●When an overlay image is not stored in memory, Form Overlay function is not selectable.
or
∗One image file can be registered.
With the optional Hard Disk Drive (DA-HD60)
installed, up to 5 image files can be registered.
If the selected File Key already contains a
registered file image, the new image will overwrite
the current image.
∗∗Without the optional Hard Disk Drive (HDD) installed: After
pressing the FILE EDIT button, the machine skips Step 3
and proceeds to Step 4 (Erase Mode).
12
123
12
∗∗
Downloaded From ManualsPrinter.com Manuals 
						

							59
Making Copies
Density for 1st page imageNumber of Copies
(Max. 999)
or
Select the overlay image to store
into memory for later use.
or
Density for
registered
image
REGISTER
or
File Name
ERASE
FILE NAME EDIT
Enter the file name
Select a fileNumber of Copies
(Max. 999)
From Platen:
If “Another Original? message is
displayed, touch the YES or “NO”
button.
Ex: 2 originals
Touch YES button.
Place the next original on the Platen.
3Press Start Key.
4Touch NO button. To cancel the registration,
touch CANCEL button.
From Platen:
Same procedures
as for Form Overlay
345
45
4
67
45
34
Downloaded From ManualsPrinter.com Manuals 
						

							60
Making Copies
Other Features
■ Job Memory
Five Copy Jobs can be stored in Memory
(M1 to M5) for recall at a later time.To store a job in memory
M1, M2, M3, M4, M5 Set up the copy job
to be stored.
12
NOTE:
When the M5 Key is used, the Double
Exposure Mode should be set to Off
in the Copier Settings 19 Double
Exposure. (See page 67)
NOTE●JOB MEMORY mode will not be deleted even if the power switches are turned Off.
●When storing a new job into a programmed memory location, the previously stored job will be
overwritten and erased.
●M1, M2 can use as manual skyshot mode by setting the user function mode.
■ Double Exposure
From 2-Sided originals to 1-Sided 2 in 1
copies (side-by-side image).∗1
•Front Side of Original
•Original Size:
Free, maximum Invoice size
•Opening the ADF
•Fit original to the Original
Guide.
Back Side
of Original
NOTE:
●When opening the ADF.
●An incorrect position detection of the original may occur
when a strong light shines on the glass during this mode.
●An incorrect exposure may occur when there is a black
line at the edge of the original or an image which the
machine interprets as a black pattern in this mode.
●The final copy may be affected if colored background
original(s) do not have a white edge or if it is less than 2
mm wide. Original Size:
Maximum InvoiceCopy Size: Letter-R
ex. Invoice
NOTE:
A
B
CA
B
CD
E
F
Front Side
ImageBack Side
Image
12
56
Original Guide
(See NOTE)
∗
2
∗1When selecting the Double Exposure, it will
be displayed as 2 in 1 at Job Settings, and
N in 1 of Function Select Key will also be
displayed.
∗2Double Exposure function set by M5 key is
unable to store with other Job Memory.
Downloaded From ManualsPrinter.com Manuals