Panasonic DP 3530 User Manual

							81
Accessories
Accessories
Components
■The DP-3530/4530/6030 is a digital photocopier which can produce images with great clarity.
Furthermore, its copying functionality can also be greatly enhanced by the addition of the following options and
supplies.
We hope you find that the wide ranging capabilities will make your office-place more productive and efficient.
■ OptionsImage Memory
(DA-SM16B/64B/28B)
●16/64/128 MB
●To increase the memory capacity for
electronic sorting.
Hard Disk Drive (HDD) Unit
(DA-HD60)
●For PS Printing (for Fonts)
Security Print/Mailbox
Tandem copy/Concurrent copy
I-FAX without mail server
1,000 Station Address Book
Print Job Spooling
OneRIP
Account Management
Expansion Board
(DA-EM600)
●Expansion F-ROM (8 MB)
Network Scanner Module
(DA-NS600)
Printer Controller Module
(DA-PC602)
●Printer Controller for PCL6∗
Multi Page Description Language
Controller Module
(DA-MC602)
●Printer Controller for PS∗
/PCL6
Fax Communication Board
(DA-FG600)
Internet Fax/E-Mail Module
(DA-NF600)
NOTE∗PCL6 is a Page Description Language of the Hewlett-Packard Company.
PS is a Page Description Language of the Adobe Corporation.
●Contact your authorized service provider for details on combinations of options. 2-Bin Finisher
(DA-FS330 for DP-3530)
(DA-FS600 for DP-4530/6030)
(See pages 48 and 82)
1-Bin Saddle-Stitch Finisher
(DA-FS355A for DP-3530/4530)
(See pages 48 and 82)
2-Bin Saddle-Stitch Finisher
(DA-FS605 for DP-4530/6030)
(See pages 48 and 82)
Punch Unit for DA-FS600/605
(DA-SP31)
(See page 82)
Punch Unit for
DA-FS355
(DA-SP41)
(See page 82)
Exit Tray
(DA-XT600)
System Console
(DA-DS603/604)
●To increase the paper feed
sources and capacity.
DA-DS603: Paper Tray x 1
DA-DS604: Paper Tray x 2
(550 sheets)
3000-Sheet Tray (LCT)
(DA-MA301)
●To increase the paper feed
capacity.
(3000 sheets)
Letter-R/Legal Size Adaptor for
LCT
(DA-TK31)
Downloaded From ManualsPrinter.com Manuals 
						

							82
Accessories
Finisher
Bin
Finisher
1. Components
DA-FS600/FS605
Punch Unit
(Option: DA-SP31)
For punching 3 holes on
copies.
DA-FS355A
1 Bin
2 Bin
Saddle Stitcher Tray
(DA-FS605)
When using the Booklet
copy mode (see page 44).
Punch Unit (Option: DA-SP41)
For punching 3 holes on copies. Saddle Stitcher Tray
When using the Booklet
copy mode (see page 44).
12
■ DA-FS600/FS605 with optional Punch Unit (DA-SP31)
5. Dispose the Punch Hole Residue
12
■ DA-FS355A with optional Punch Unit (DA-SP41)
12
■ DA-FS330
Punch Unit
Front Cover
Punch Hole
Residue Container
Downloaded From ManualsPrinter.com Manuals 
						

							83
Accessories
Trash Box
DA-FS330
1 Bin
2 Bin
Letter size only
Electronic Shift
Stapling
2. Operation
(See page 48)
3. Replacing the Staple
Cartridge
(See pages 18-21)
4. Bin Capacity
(See pages 92 and 93)
453
453
453
Punch Unit
Front Cover
Return the finisher to original
position.
Dispose the punch hole
residue.
Downloaded From ManualsPrinter.com Manuals 
						

							84
Network Scanner (Option)
■ Document Scanning
When the Panasonic Document Management
System (PDMS) is installed and configured
on your PC, document(s) can be scanned from
the DP-3530/4530/6030 to PC.
When using the network scanner, it is necessary first
to make the Panasonic Communication Utility software
start on your PC.
or
Original Size
if original size is not shown
Registering your PC/Document Scanning
12
8
5
■ Registering your PC
When the Panasonic Document Management System
(PDMS) included on the CD-ROM is installed, start
the Panasonic Communication Utility and, register
your PC by setting the network scanner.1
 Right-click on the icon.
 Select Scanner Configuration....
Downloaded From ManualsPrinter.com Manuals 
						

							85
Network Scanner
(Option)
Select a destination (PC)∗
∗  A destination will be indicated
“ROUTING MENU” : refer to optional
Document Distribution System (DA-WR10).
NOTE:
If the Panasonic Communication Utility software
is not started on your PC, a destination is not
shown on the Touch Panel Display.
Select a Mode if required
Resolution∗
Exposure
Original mode2-Sided Original
Thin Original
PC Screen
Refer to PDMS Operating
Instructions on the
CD-ROM.
34
5
910
∗150dpi: Text mode only.
6
File name
(Max. 20 characters)
  Ex.: Jack
7
8
Select a file
format
8
When “CUSTOM” is selected.
When
“DATE/TIME”
is selected.
2
Select “Auto Registration”.
Set the PC and Key Name to be saved on the machine.
When the DP-3530/4530/6030 is installed on a different subnet
mask∗
 of the network (LAN), Select Add Device then, register the
machine by following the steps below.
3Click OK.Right-click on the Panasonic
Communications Utility icon, and select
one of the Scanner Reception
Notifications (Pop up Display or Icon
Display).
Click Add.
Input the machines Device Name and IP Address.
Click OK.
Returns to the screen on the left.
3Click OK.
Returns to the Scanner Configuration screen above.
When the DP-3530/4530/6030 is installed on a different subnet mask∗ ∗∗ ∗
∗
 of the network.NOTE:
∗Consult your system administrator for
detail of your subnet mask.
3
Downloaded From ManualsPrinter.com Manuals 
						

							86
Problem Solving
Troubleshooting
CheckAction
Unit Does Not Operate
Check if the Power Switches (Main Power
Switch on the back and Power Switch on the
Left Side of the machine) are turned ON and if
the power cord is plugged into the AC outlet. Does the display light?
Press Energy Saver key on the control panel. Does the Energy Saver key flash (or light)
and displays are turned OFF?
(See page 62)
Perform actions in accordance with each
message. Does any of the U## codes and messages
appear on the display?
(U1, U4, U6, U7, U11....etc.)
Add Staples (See pages 18-21)
Remove all jammed staples. (See pages 19, 21) Does the Add Staples indicator and message
appear on the display?
Add paper. (See pages 14, 16, 17) Does the Add Paper indicator and message
appear on the display? ()
Remove the misfed paper. (See pages 20 - 29) Does the paper misfeed indicator and
message appear on the display? ()
Turn the Power Switch on the Left Side and
the Main Power Switch on the Back of the
machine to the OFF and ON. If the error code
does not clear, call your Service provider. Does E#-## indicator and message appear
on the display?
Turn the Power Switch on the Left Side and
the Main Power Switch on the Back of the
machine to the OFF and ON. The machine would not accept the next job
during operation, instructed job would not be
accepted for a long time period or job would
not be completed.
Light Copies
Touch the “DARKER” button. Does the exposure indicator say “LIGHTER”?
Replace the Toner Bottle.
(See pages 16 and 17) Does the Add Toner indicator and message
appear on the display? (
)
Downloaded From ManualsPrinter.com Manuals 
						

							87
Problem Solving
CheckAction
Marked Copies
Clean the Platen Glass or Sheet.
(See below) Is the copier Platen Glass or Platen Sheet
dirty?
Cover the original with a sheet of white paper
before copying or lighten the exposure setting. Is the original an OHP film or a dark original?
■ If the measures outlined above do not solve the problem, call your Service provider.
Copier Care
■ As a rule, clean weekly.
Platen Sheet
Platen (Glass)Platen Glass/Platen Sheet
 Wipe marks off with a cloth and a neutral detergent.
 Wipe again with a dry cloth.
Downloaded From ManualsPrinter.com Manuals 
						

							88
Problem Solving
Replacing the Battery/Set the Date and Time
The copier has an internal battery (Product No.:
CR2032) which maintains the date and time.
In the event the battery requires replacement,
the following message will be displayed.Data LED
Turn the Power Switch on
the Left Side of the
machine to the OFF
position and open the Front
Cover.
Scroll to 05/10
NOTE●The service life of the battery is approximately 1 year under normal use.
12
12
5
Remove a Screw and Holder.
Setting the Date and Time (if required):
CAUTION
Keep button batteries and small parts out of reach of children to
prevent chocking or poisoning. If a button battery is swallowed
accidentally, get medical treatment immediately.
Downloaded From ManualsPrinter.com Manuals 
						

							89
Problem Solving
1
2
Data LEDTurn the Power Switch
on the Left Side of the
machine to the ON
position and close the
Front Cover.
ID Code
(Department Code)
TimeMonth, Day, Year,
Time
Month/Day/Year/Time
CAUTION
denotes hazards that could result in minor injury or damage to the machine.
●THIS PRODUCT CONTAINS A LITHIUM BATTERY. REPLACE ONLY WITH THE SAME OR EQUIVALENT TYPE.
IMPROPER USE OR REPLACEMENT MAY CAUSE OVERHEATING, RUPTURE OR EXPLOSION RESULTING IN
INJURY OR FIRE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS OF YOUR LOCAL
SOLID WASTE OFFICIALS AND LOCAL REGULATIONS.
345
34
5
67
Used
New
Reinstall a Holder and Screw.
Downloaded From ManualsPrinter.com Manuals 
						

							90
Others
Type Semi Console
Platen Type Fixed
Acceptable Originals Sheets, Books (max. Ledger)
Copying Method Laser Electrophotography
Fixing Method Heat Roller Fixing
Imaging Method Dry-Type Two components imaging
Resolution Maximum: 600 dpi
Operation Panel Touch Panel Display
Maximum Copy Size Ledger - Invoice via Paper Tray
Void Area Max.  0.2″ (5 mm)
Warm Up Time DP-4530/6030 : Approx. 180 seconds (68°F/20°C)
DP-3530 : Approx.   30 seconds (68°F/20°C)
First Copy Time DP-3530 : Approx. 5.8 seconds
DP-4530 : Approx. 4.5 seconds
DP-6030 : Approx. 3.5 seconds
(Letter , from 1st Tray, platen)
Multi-Copy Speed DP-3530 : 35 cpm (Letter size)
DP-4530 : 45 cpm (Letter size)
DP-6030 : 60 cpm (Letter size)
Enlargement Ratios Preset: 121%, 129%, 155%, 200%
Variable: from 101 - 400% in 1% increments
Reduction Ratios Preset: 79%, 77%, 65%, 61%, 50%
Variable: from 99 - 25% in 1% increments
Paper Feed Paper Tray (1550 sheets + 550 sheets) + Sheet Bypass (50 sheets)
+ System Console (1100 sheets)
Paper Weight Paper Tray: 16 - 24 lb (Bypass: 15 - 35 lb)
Quantity Selector Maximum: 999 sheets (Optional Exit Tray capacity is 250 sheets)
Electrical Consumption 120V AC, 60Hz, 12A
Energy Consumption 1.45 kW
Dimensions (W × D × H) 23.6″ (W) × 29.8″ (D) × 35.4″ (H) (600 × 758 × 900 mm)
Weight 289.2 lb (131 kg) : DP-4530/6030
282.6 lb (128 kg) : DP-3530
Operating Environment Temperature: 50 - 86°F (10 - 30°C) Relative Humidity: 30 - 80%
(However, the humidity should be 70% or less at a temperature of 86°F (30°C),
and the temperature should be 80°F (27°C) or less at a humidity level of 80%.)
■ DP-3530/4530/6030 (Copier)
Specifications
●Specifications are subject to change without notice.
Modes Power Consumption Warm Up Time
Normal Operation Approximately 160 Wh (3530)
Approximately 210 Wh (4530) N/A
Approximately 240 Wh (6030)
Power Saver Mode Approximately 125 Wh (3530)
Approximately 170 Wh (4530) Min. 30 sec. recovery (3530/4530/6030)
Approximately 180 Wh (6030)
Sleep Mode Approximately 20 Wh 30 sec. recovery (3530)
180 sec. recovery (4530/6030)
Shutdown Mode Approximately 4 Wh 30 sec. recovery (3530)
180 sec. recovery (4530/6030)
Downloaded From ManualsPrinter.com Manuals