Panasonic HC V770 Owners Manual

							- 171 -
∫
About the screen indications in the Live Cast Mode
≥Recording is performed in Intelligent Auto Mode.
≥ In Live Cast Mode, [REC FORMAT] is set to [AVCHD], and [REC MOD E] (l173 ) is set to [PH]/
[HA]/[HG]/[HE].
≥ If you record an image when the LCD monitor of this unit is clo sed with the screen facing outward, 
the LCD monitor turns off.
≥ If this unit is on the e-mail send er block list of destination devices or if their firewall setting is 
enabled, the Wi-Fi function may not work correctly when you sen d an e-mail. If this occurs, check 
the network settings.
≥ When the live broadcast cannot be watched on a USTREAM applicat ion for TVs or smartphones, 
cancel the Password for the Program, and restart the broadcast.
≥ Image content may be leaked to third parties depending on the U STREAM image publication 
method settings. Set the publication range and Password using U STREAM if required.
Touch   to display the live broadcast setting 
screen.
≥/ /  will disappear when no touch function is 
performed for a specific period of time. To display them again,  
touch the screen. /
Live broadcast indication
Image quality (l 172)
1h23m Elapsed time of the live broadcast
10fps Frame rate ( l172 )
Number of people watching the live 
broadcast
≥ Up to 9999 viewers can be 
indicated. The indication does not 
appear when the number is 0.
E-mail delivery setting
Live broadcast microphone setting 
( l 173 )
≥ The indication appears when 
[Microphone On Air] is set to 
[OFF].
Configuring the live broadcast settings

R 1h20mR 1h20mR 1h20m
A [EXIT] 
						

							- 172 -
∫
To configure the e-mail delivery settings
You can make the delivery setting of a broadcast notification e -mail and the setting for the 
scheduled time and date of the broadcast indicated in the e-mai l.
1Touch [Send E-mail].
2 Touch [ON] or [OFF].
3
(When [ON] is selected)To set the scheduled broadcast date.
∫ To set the image quality
1 Touch [IMAGE QUALITY].
2 Touch the desired image quality.
≥Frame rate in parentheses are when recorded in simultaneously.
≥ Depending on the line status of the broadband line, mobile rout er (tethering), etc. to which this 
unit is connected, the image and sound may be interrupted or th e connection may be lost. Set the 
image quality on this unit by referring to the recommended opti mal speeds (upstream) above.
≥ For information on the optimal speed, contact your service prov ider, etc.
≥ If the image being broadcast appears as if frames were dropped  or stops when [AUTO] is set, 
change [IMAGE QUALITY] according to your environment.
≥ If the selected image quality has an image quality higher than  the one you are using, images will 
appear as if the frame rate is low.
≥ Operation cannot be guaranteed for all devices.
≥ Even with a broadband line, the recommended optimal speed may n ot be reached depending on 
your environment.
≥ Narrowband lines such as analog modems cannot be used.
≥ If the line for the smartphone is switched, communication may be interrupted. In that case, 
connect again.
[ON]:Enables e-mailing.
[OFF]:Disables e-mailing.
[Set to Sending E-mail 
Time]:Allows you to set the date on which   is touched.
[Manual Setting]:Allows you to set the desired time and date.
≥The setting method is the same as [CLOCK SET]. ( l21)
Image 
QualityPicture sizeFrame rateScreen 
indicationsRecommended optimal  speed (upstream)
[High] 1280k720 5 to 30 fps
(5 to 10 fps) 3 Mbps or higher
[Medium] 640k360 5 to 30 fps
(5 to 10 fps) 1 Mbps or higher
[Low] 320k176 5 to 30 fps
(5 to 15 fps) 500 kbps or higher
[AUTO] Use this option to check the image quality and automatically se
t the item. 
						

							- 173 -
∫
To save in USTREAM
1 Touch [Save in USTREAM].
2 Touch [ON] or [OFF].
∫To set the image quality of a motion picture you simultaneously  
broadcast and record
1 Touch [REC MODE].
2 Touch desired recording mode.
∫Broadcasting live with no sound
1 Touch [Microphone On Air].
2 Touch [OFF].
≥If you broadcast and record a motion picture simultaneously whe n this item is set to [OFF], the 
sound of the broadcast will not be recorded.
[ON]:Live motion pictures are saved on USTREAM.
[OFF]:Select this option not to save on USTREAM.
[PH]/[HA]/[HG]/[HE]
[ON]:Sound is output during live broadcasts.
[OFF]:Sound is not output during live broadcasts. 
						

							- 174 -
≥To use the following Wi-Fi func tions, you need to install the smartphone application “Image App”.
j [TWIN CAMERA] ( l192 )
j [Link to Cell] ( l145 )
j [Baby Monitor] ( l152 )
j [Home Cam] ( l155 )
* The supported OS versions are current as of December 2014 and  subject to change.
≥ Use the latest version.
≥ Refer to [Help] in the “Image App” menu about function of Image  App.
≥ The service may not be able to be used properly depending on th e type of smartphone being 
used. For information on the “Image App”, check the support web site below.
http://panasonic.jp/support/global/cs/e_cam
(This Site is English only.)
≥ When downloading the app on a mobile network, high packet commu nication fees may be 
incurred depending on the details of your contract.
Wi-Fi
Install the “Image App”
About the “Image App”
The “Image App” is an application provided by Panasonic.
For Android appsFor iOS apps
OS Android 2.3.3 or later*iOS 6.0 or later*
(iPhone 3GS is not supported.)
Installation 
procedure1Connect your Android 
device to a network.
2 Select “Google Play™ 
Store”.
3 Enter “Panasonic Image 
App” into the search 
box.
4 Select “Panasonic 
Image App” and install 
it.
≥The icon will be added 
to the menu.
1 Connect your iOS 
device to a network.
2 Select “App Store
SM”.
3 Enter “Panasonic Image 
App” into the search 
box.
4 Select “Panasonic 
Image App” and install 
it.
≥The icon will be added 
to the menu. 
						

							- 175 -
To use the Wi-Fi function, connect this unit to a wireless access point or smartphone via Wi-Fi.
≥ Depending on the Wi-Fi connection method, available Wi-Fi funct ions differ.
≥ If you select [History], you can set up a Wi-Fi connection that  uses the connection settings of a 
previously used Wi-Fi function. ( l183)
∫ About the status indicator and the connection status icon when 
connected to Wi-Fi
≥For information on how to set up a Wi-Fi connection for the Wir eless Twin Camera function, refer 
to page 194 ; for information on the connection status icons, refer to  199.
Wi-Fi
Setting Up a Wi-Fi Connection
Wi-Fi connection 
methods Connecting to a wireless access 
point (
l178) Setting up a direct connection to a 
smartphone (
l181 )
Available Wi-Fi 
functions ≥
[Link to Cell] ( l148 )
≥ [Baby Monitor] ( l152 )
≥ [Home Cam] ( l155 )
≥ [DLNA Play] ( l162)
≥ [Copy] ( l164)
≥ [Live Cast] ( l168 ) ≥
[Link to Cell] ( l147 )
A Lit green
≥ The status indicator is lit green while this unit is 
connected to a destination device after completing a 
Wi-Fi connection.
≥ When Wi-Fi is disconnected, the status indicator is lit 
red again.
B The connection status icon
When connected to wireless access point:  connected to Wi-Fi/  not connected to Wi-Fi
≥ The display will change as follows according to the 
radio wave intensity:   (Weak)  #  #  # 
 (Strong).
When directly connected:  connected to Wi-Fi/  not connected to Wi-Fi

 
						

							- 176 -
Using the [Wi-Fi Setup Wizard] to set up a connection
With the smartphone application “Image App”, you can transfer t he following information between 
the smartphone and this unit by using the NFC or QR code functi on.
≥ Set [Direct Connection Password] in [Wi-Fi Setup] to [ON]. ( l187 )
(The default setting is [OFF].)
* Acquire a Login ID and Password for the “LUMIX CLUB” on this u nit in advance.
≥ Install the smartphone application “Image App” on your smartpho ne. (l174)
≥ Set the NFC function of the smartphone to ON.
1Press Wi-Fi button on this unit and touch [Wi-Fi Setup]. 
2Touch [Wi-Fi Setup Wizard].
3Touch [YES].
4Start up the smartphone application “Image App”.
5Touch the smartphone on   of this unit.≥Touch the NFC touch area while the NFC mark is displayed on the  smartphone screen.
≥ If this is the first time the sm artphone is connecting to this  unit, touch [YES] on the screen of this 
unit, and then touch the smartphone on   of this unit again.
≥ When the connection is complete, the setup screen is displayed  on the smartphone.
6Follow the on-screen instructions of the smartphone to set up a connection.≥When the settings is complete, the smartphone and this unit are  connected directly, allowing you 
to use remote operations. ( l147 )
Set on the smartphone and 
transfer to this unit ≥
Clock information
≥ Information on wireless access points (SSIDs and Passwords)
≥ “LUMIX CLUB” Login ID, Password
*
Transfer from this unit to the 
smartphone ≥
Device ID for home monitoring
If the device is Android (NFC-compatible) 
						

							- 177 -
1Press Wi-Fi button on this unit and touch [Wi-Fi Setup]. 
2Touch [Wi-Fi Setup Wizard].
3Touch [YES].
4Touch [QR code] or [Wi-Fi].
When [QR code] is selected
1 Start up the smartphone application “Image App”.
2 On the smartphone, select [QR code], and scan the QR code displ ayed on the 
screen of this unit.
≥ The setup screen is displayed on the smartphone.
≥ When using an iOS device, perform the following operations:
1 Select the option that allows you to install the app on the pro file screen of the “Image App”, and 
follow the on-screen instructions to complete the installation.
2 Press the home button to close the displayed screen.
3 Touch [NEXT] on the screen of t his unit to display its SSID.
4 After selecting the network name (SSID) of this unit from the W i-Fi setup of the smartphone, 
start up “Image App”.
3 Follow the on-screen instructions of the smartphone to set up a connection.≥When the settings is complete, the smartphone and this unit are  connected directly, allowing you 
to use remote operations. ( l147 )
When [Wi-Fi] is selected≥If you are using an Android device, start up the smartphone app lication “Image App”.
1(If the device is Android)
On the smartphone, select [Wi-Fi], and select the SSID displaye d on this unit.(If the device is iOS)
On the smartphone, select the SSID displayed on this unit from  the Wi-Fi setup menu.
2(If the device is Android)
Enter the Password displayed on this unit.(If the device is iOS)
After entering the Password displayed on this unit, start up the “Image App”.
3 Follow the on-screen instructions of the smartphone to set up a connection.
≥When the settings is complete, the smartphone and this unit are  connected directly, allowing you 
to use remote operations. ( l147 )
Connecting with Android (non-NFC-compatible) or iOS device 
						

							- 178 -
Connecting to a wireless access point
Check if the wireless access point you are using is compatible with WPSjIf the wireless access poin t is compatible with WPS:
Proceed to the following [WPS Connection]
j If the wireless access point is not compatible with WPS:
“Searching for wireless access points to set up a connection” ( l179 )
1Press Wi-Fi button on this unit. 
2Touch [Wi-Fi Setup].
3Touch [Wireless Settings].
4Touch the part with no display of a wireless 
access point.
≥For information on how to delete wireless access points or 
change the search order of wireless access points, please 
refer to [Wireless Settings] on page  186.
5Touch [WPS Connection].
6Set the wireless access point to waiting for WPS.≥For further details, please read the operating instructions for  the 
wireless access point. (When using a tethering connection, plea se 
read the operating instructions for the smartphone.)
≥ A message is displayed when the connection is complete. Touch 
[ENTER], and exit [Wireless Settings].
≥ A message is displayed when the connection attempt fails. Touch  
[ENTER], and set the connection again.
[WPS Connection]

A [Delete]
B [ENTER] 
						

							- 179 -
Enter a PIN code to set the Wi-Fi connection
1Touch [PIN code] in Step 6.
2 Touch the wireless access point to be connected.
≥If you touch [Refresh], you can search for wireless access poin ts again.
≥ If you touch   and select a wireless access point, all character s will be displayed. In this 
case, touch [ENTER].
3 Enter the PIN code displayed on this unit screen into the wirel ess access 
point.
≥ For further details, please read the operating instructions for  the wireless access point. (When 
using a tethering connection, please read the operating instruc tions for the smartphone.)
4Touch [NEXT].≥A message is displayed when the connection is complete. Touch [ ENTER], and exit [Wireless 
Settings].
≥ A message is displayed when the connection attempt fails. Touch  [ENTER], and set the 
connection again.
≥ Confirm Encryption key (Password)  of the selected wireless access point if the network 
authentication is encrypted.
1Press Wi-Fi button on this unit. 
2Touch [Wi-Fi Setup].
3Touch [Wireless Settings].
4Touch the part with no display of a wireless 
access point.
≥ For information on how to delete wireless access points or 
change the search order of wireless access points, please 
refer to [Wireless Settings] on page  186.
5Touch [Search for wireless network].
6Touch the wireless access point to connect.≥If you touch [Refresh], you can search for wireless access 
points again.
≥ If you touch   and select a wireless access point, all character s will be displayed. In this 
case, touch [ENTER].
≥ When no wireless access points are displayed, refer to “Setting  up a connection manually”. 
( l 180 )
≥ If an Encryption key (Password) is not set, the connection is c omplete and a message is 
displayed. Touch [ENTER], and exit [Wireless Settings].
Confirming that the Wi-Fi connection is complete
jThe status indicator of this unit is lit green
j  is displayed on the screen
Searching for wireless access points to set up a connection

A[Delete]
B [ENTER] 
						

							- 180 -
7(When there is an Encryption key (Password))Enter the Password.≥For details on how to enter characters, refer to page  104.
≥ When the entry is complete, touch [Enter].
≥ A message is displayed when the connection is complete. Touch [ ENTER], and exit [Wireless 
Settings].
≥ When connecting by [Manual Setting], confirm the SSID (Identifi cation name), Authentication 
method, Encryption type, and Encryption key (Password) of the w ireless access point you are 
using.
1Press Wi-Fi button on this unit. 
2Touch [Wi-Fi Setup].
3Touch [Wireless Settings].
4Touch the part with no display of a wireless 
access point.
≥ For information on how to delete wireless access points or 
change the search order of wireless access points, please 
refer to [Wireless Settings] on page  186.
5Touch [Manual Setting].
6Touch [INPUT], then enter the SSID of the 
wireless access point to be connected.
≥For details on how to enter characters, refer to page  104.
≥ When the entry is complete, touch [Enter].
7Touch the desired Network Authentication method.
≥When [WEP] is selected, proceed according to step 9.
8Touch the desired Encryption method.≥If you select [NONE], a message is displayed after completing t he connection. Touch [ENTER], 
and exit [Wireless Settings].
Confirming that the Wi-Fi connection is complete
jThe status indicator of this unit is lit green
j  is displayed on the screen
Setting up a connection manually
Network authentication typeEncryption types that can be set
[Open] [NONE]/[WEP]
[WEP] There is no setup of an encryption types.
[WPA-PSK]/[WPA2-PSK] [TKIP]/[AES]

A[Delete]
B [ENTER]