Panasonic HC V770 Owners Manual

							- 31 -
≥Touch   (left side)/   (right side) of   on the Touch Menu to disp lay  . (l20)
1To u c h   .
2Touch the top menu  A.
3Touch the submenu B.
≥ Next (previous) page is displayed by touching 
/.
4Touch the desired item to enter the 
setting.
5Touch [EXIT] to exit the menu 
setting.
∫About   guide display
After touching  , touching the submenus 
and items will cause function descriptions and 
settings confirmation messages to appear.
≥After the messages have been displayed, the 
guide display is canceled.
Basic
Using the menu screen
MENU
MENU
MENU 
						

							- 32 -
Set the display method for the screen information display.
Please refer to page 21.
It is possible to display and r ecord the time at the travel des tination by selecting your home region 
and the travel destination.
1 Select the menu.
≥When the [HOME] (your home region) is not set, the message appe ars. Touch [ENTER] and 
proceed to Step 3.
2(Only when setting your home region)To u c h   [ H O M E ] .≥ Touch [ENTER].
3(Only when setting your home region)Touch  /  to select your home 
region and touch [ENTER].
≥Touch [DAYLIGHT SAVING] to set daylight 
saving time.   is displayed and the 
summer time setting is turned on, the time 
difference between the current time and GMT 
will be set forward by 1 hour. Touch [DAYLIGHT 
SAVING] again to return to the normal time 
setting.
If you set [Link Clock to Daylight Saving] to 
[ON], the current time will also be set forward by 1 hour. ( l33)
Basic
Using the Setup Menu
[DISPLAY]
: [SETUP]  # [DISPLAY]  # desired setting
[5 SEC.]:Information is displayed on the screen for 5 seconds after star ting the 
Motion Picture Recording Mode or Still Picture Recording Mode,  starting 
to playback, or touching the screen.
[ON]:Constantly displayed.
[CLOCK SET]
[SET WORLD TIME]
: [SETUP]  # [SET WORLD TIME]
MENU
MENU


A The current time
B The time difference from GMT 
(Greenwich Mean Time) 
						

							- 33 -
4(Only when setting the region of your travel destination)
Touch [DESTINATION].≥Touch [ENTER].
≥ When the home region is set for the first time, the screen for  selecting home/travel destination 
appears after setting the home region successively. If the home  region has already been set 
once, execute the menu operation for Step 1.
5(Only when setting the region of your travel 
destination)
Touch  /  to select your travel 
destination and touch [ENTER].
≥ Touch [DAYLIGHT SAVING] to set daylight 
saving time.   is displayed and the 
summer time setting is turned on, the time 
difference between the travel destination and 
the home region will be set forward by 1 hour. 
Touch [DAYLIGHT SAVING] again to return to 
the normal time setting.
If you set [Link Clock to Daylight Saving] to 
[ON], the time at the travel destination will also 
be set forward by 1 hour.
≥ Close the setting by touching [EXIT].   appears and the time of  the travel destination is 
indicated.
To return the display to the home settingSet the home region using Steps 1 to 3, and close the setting b y touching [EXIT].
≥If you cannot find your travel d estination in the area shown on  the screen, set it by using the time 
difference from your home region.
If you set this function to [ON] and turn on the summer time setting in [SET WORLD TIME], the 
following times will be set forward by 1 hour: jWhen setting your home region: The current time
j When setting the region of your travel destination: The time at  the travel destination
[Link Clock to Daylight Saving]
: [SETUP] # [Link Clock to Daylight Saving]  # desired display
[ON]:The times are adjusted when the summer time setting is turned o n.
[OFF]:The times are not adjusted when the summer time setting is turned on.


CThe local time at the selected 
travel destination
D The time difference between the 
travel destination and the home 
region
MENU 
						

							- 34 -
It is possible to change the date and time display mode.
≥The date and time are not displayed while the recording mode sw itching icon is displayed. (l18)
≥ When the Touch Shutter is enabled, the recording mode switching  icon is constantly displayed. 
This causes the date and time to disappear from the screen.
It is possible to change the date format.
You can set the display method of  the zoom button icons ( / ) and  recording button icon ( ).
Please refer to page 73.
Please refer to page  126.
[DATE/TIME]
: [SETUP] # [DATE/TIME]  # desired display
[DATE]/[D/T]/[OFF]
[DATE FORMAT]
: [SETUP]  # [DATE FORMAT]  # desired setting
[Y/M/D]/[M/D/Y]/[D/M/Y]
[ZOOM/REC DISPLAY]
: [SETUP] # [ZOOM/REC DISPLAY]  # desired setting
[ON]:Constantly displayed.
[OFF]:Icons will disappear after approx. 5 seconds without any touch  operation.
[O.I.S. LOCK DISPLAY]
[EXT. DISPLAY]
MENU
MENU
TW
MENU 
						

							- 35 -
When about 5 minutes have passed without any operation, this unit automatically turns off to save 
battery life.
≥ This unit will not automatically turn off even if [ECONOMY (BAT T)] is set to [ON] in following 
cases:
j Using the AC adaptor*
j Using the USB cable for PC etc.
j PRE-REC is used
j During slide show playback
j Using the Wi-Fi function
* When [ECONOMY (AC)] is activated, this unit automatically turn s off.
When about 15 minutes have passed without any operation while co nnecting AC adaptor with this 
unit, this unit automatically turns off.
≥ This unit will not automatically turn off even if [ECONOMY (AC)] is set to [ON] in following cases:
jUsing the USB cable for PC etc.
j PRE-REC is used
j During slide show playback
j Using the Wi-Fi function
The unit is put into recording pause approx. 1 second when the u nit is turned on.
≥Depending on the recording conditions, start time may be longer  than 1 second.
≥ In the Quick Power On Mode, the zoom magnification becomes appr ox. 1k.
[ECONOMY (BATT)]
: [SETUP]  # [ECONOMY (BATT)]  # [ON]
[ECONOMY (AC)]
: [SETUP] # [ECONOMY (AC)] # [ON]
[QUICK POWER ON]
: [SETUP]  # [QUICK POWER ON]  # [ON]
MENU
MENU
MENU 
						

							- 36 -
Touch screen operation, starting and stopping of recording and unit on/off can be confirmed with this 
sound.
When [OFF] is selected, the sound is not output at the start/en d of recording, etc.
2 Beeps for 4 times
When an error occurs, follow the instructions displayed on the  screen. (l221 )
≥Refer to page  92 when changing the shutter sound setting.
You can change the operation icons ( l74) to display in the Touch Menu.
Register 3 favorite operation icons.
≥ The default settings are as follows:
/
1Select the menu.
2 Touch the operation icon you would like to change to cancel the  setting.
3 Touch the operation icon to be set.
≥Name of the function is displayed by touching and holding on th e operation icon.
≥ To cancel, touch the operation icon again.
4 Touch [ENTER].
[ALERT SOUND]
: [SETUP]  # [ALERT SOUND]  # desired setting
(Volume low)/ (Volume high)/[OFF]
[SELECT OPERATION ICONS]
Motion Picture Recording ModeStill Picture Recording Mode
 (PRE-REC)  (Self-timer)
 (Video light)  (Video light)
 (Night Mode)  (Backlight Compensation)
Motion Picture Recording ModeStill Picture Recording Mode
 (Fade)  (Self-timer)
 (PRE-REC)  (Video light)
 (Video light)  (Backlight Compensation)
: [SETUP]  # [SELECT OPERATION ICONS]
MENU
WX970VX870
V770
MENU 
						

							- 37 -
This makes it easier to view the LCD monitor in bright places including outdoors.
≥ These settings will not affect the images actually recorded.
≥When the AC adaptor is in use, the LCD monitor is set to   autom atically.
≥ Recordable time with the battery is shortened when the LCD is m ade brighter.
≥ When the video light is set to   ([ON]) or   ([AUTO]) and it is l it, it cannot be set.
It adjusts brightness and color density on the LCD monitor.
≥ These settings will not affect the images actually recorded.
1 Select the menu.
2 Touch  /  to adjust settings.
3 Touch [ENTER].
≥Touch [EXIT] to exit the menu screen.
Please refer to page  127.
Please refer to page  128.
Please refer to page  126.
[POWER LCD]
: [SETUP] # [POWER LCD]  # desired setting
(Makes brighter)/ (Normal)/ (Makes less bright)
[LCD SET]
: [SETUP] # [LCD SET]  # desired setting
[BRIGHTNESS]:Brightness of the LCD monitor
[COLOR]:Color level of the LCD monitor
[HDMI RESOLUTION]
[VIERA Link]
[TV ASPECT]
MENU
+10-1
+1
MENU 
						

							- 38 -
Set to [YES] for changing the menu settings back to the default condition.
≥ Settings for [CLOCK SET] and [LANGUAGE] will not be changed.
≥If you restore the default settings, this unit will switch to t he Motion Picture Recording Mode.
Set to [YES] for changing the Wi-Fi settings back to the default condition.
≥ The “LUMIX CLUB” Login ID and Wi-Fi Password are also deleted.
You can delete the music ( l101 , 108,  11 3) stored on this unit as [USER BGM].
The entered character is confirmed in approx. 1 second after ch aracter input, and the cursor is 
moved to the right.
It makes the input easy without moving the cursor when characte rs on the same key are to be 
entered again.
≥ Character input screen is displayed in following conditions:
jWhen setting [TITLE SETUP] for the Highlight Playback ( l104)
j When entering a name in the Baby Calendar ( l11 0 )
j When you configure the Wi-Fi function ( l166 , 179 , 188 , 189 , 190 )
[INITIAL SET]
: [SETUP]  # [INITIAL SET]
[Reset Wi-Fi Settings]
: [SETUP]  # [Reset Wi-Fi Settings]
[DELETE USER BGM]
: [SETUP]  # [DELETE USER BGM]
[Auto Cursor Position]
: [SETUP]  # [Auto Cursor Position]  # [ON]
MENU
MENU
MENU
MENU 
						

							- 39 -
Set the file number of the next 4K MP4 scene*, MP4/iFrame scene and still picture to be recorded to 
0001.
*/ only
≥ Folder number is updated and f ile number will start from 0001. (l 214 )
≥ To reset the folder number, format the SD card, and then perfor m [NUMBER RESET].
≥The file numbers of still pictures you record in Stop Motion An imation Assist Mode are not reset.
Please be aware that if a medium is formatted, then all the dat a recorded on the medium will be 
erased and cannot be restored. Back up important data on a PC,  DVD disc etc. (l204 )
* Displayed when connecting a USB HDD. ( l130 )
≥ Media selection screen is not displayed when the USB HDD is not  connected. Touch [YES].
≥ When formatting is complete, touch [EXIT] to exit the message s creen.
≥ Perform a physical formatting of the SD card when the SD card i s to be disposed/ transferred. 
( l 231 )
≥Do not turn this unit off or remove the SD card, while formatti ng. Do not expose the unit to 
vibrations or shock.
[NUMBER RESET]
: [SETUP]  # [NUMBER RESET]
[FORMAT MEDIA]
: [SETUP]  # [FORMAT MEDIA]  # desired media
[SD CARD]/[HDD]*
Use this unit to format media.
Do not format an SD card using any other equipment such as a PC . The card may not be 
used on this unit.
WX970VX870
MENU
MENU 
						

							- 40 -
The used space and remaining recordable time of the SD card can be checked.
≥ The remaining recordable time in the currently set Recording Mode is displayed only in the 
Motion Picture Recording Mode.
≥ Touch [EXIT] to close the indication.
≥The SD card requires some space to store information and manage  system files, so the actual 
usable space is slightly less than the indicated value. The usa ble SD card space is generally 
calculated as 1 GB=1,000,000,000 bytes. The capacities of this u nit, PCs and software are 
expressed as 1 GB=1,024 k1,024 k1,024=1,073,741,824 bytes. Therefore, the indicated value of 
the capacity appears to be smaller.
The firmware version of  this unit is displayed.
You can update the firmware version of this unit.
This item is used to start the unit demonstration.
≥ If [DEMO MODE] is switched to [ON] and you touch [EXIT] when th ere is no SD card inserted and 
while this unit is connected to the AC adaptor, the demonstrati on automatically starts.
If any operation takes place, the demonstration is canceled. Ho wever if no operations take place 
for approx. 10 minutes, the demonstration automatically starts again. To stop the demonstration, 
set [DEMO MODE] to [OFF] or insert an SD card.
≥ When Demo Mode is in operation, the lens cover remains open.
[MEDIA STATUS]
: [SETUP]  # [MEDIA STATUS]
[Firmware Version Info]
: [SETUP]  # [Firmware Version Info]
[Firmware Upgrade]
: [SETUP]  # [Firmware Upgrade]
For the latest update information, check the support website be low. (As of December 
2014)
http://panasonic.jp/support/global/cs/e_cam
(This Site is English only)
[DEMO MODE]
: [SETUP]  # [DEMO MODE]  # [ON]
MENU
MENU
MENU
MENU