Panasonic High Speed Scanner Kvs6050w Operating Instructions

							21
Display Panel Instructions
´Operation
1Press the menu key until the desired
menu is displayed. 
•
The SCAN, COUNTER, IMPRINT and
OTHERS keys are used as a menu key.
•When pressing the SCAN key, the display
will appear as shown in the diagram on
the right.
2Use the 3 key or the 4 key to select
the desired item.
•
The display at the right is an example of a
setting for the scanning setting mode.
3Use the 1 key or the 2 key to select
the desired content.
•
The display on the right is an example of
a setting for the back side contrast.
4Press the HOME key to return to the
“Ready” display or another menu key
to go to another menu.
¤In steps 2 or 3, you can change to the desired menu by pressing the desired menu key.
¤See pages 22 to 33 for details.
¤For changing the display language, see page 16.
SCAN COUNTER
IMPRINT
OTHERSREADY/
ERROR
STOP/START MODE
SELECT HOME1,4
4
3
2
Menu keys
0 1 . F . B r i   g   h   t   n   e  s   s
D––––+––
––L Hos t
07 .B.Contrast
L––––+––
––H Hos t
07 .B.Contrast
L––]–+––
––H L2
Ready
01 . D i sp .Counter
				Sc an
When the HOME key is pressed :
When the COUNTER key is pressed for another menu key :
(ex. SCAN) 
						

							22
Display Panel Instructions
´Actual settings
Scan setting menu (by pressing the SCAN key)
•
For changing the display language, see page 16. Number, mode and default display
•Pressing the 3 key will change to the next
mode.
•Pressing the 4 key will change to the
previous mode.Contents
•Pressing the 1 key or the 2 key will change to another
value.
01    Front side brightness
•When “Host” is displayed, pressing the 1 key or the 2 key
will change the display to “Norm”.
•“D” means dark. “L” means light.
02   Front side image emphasis
•When “Host” is displayed, pressing the 1 key or the 2 key
will change the display to “Medium”.
03   Front side contrast
•When “Host” is displayed, pressing the 1 key or the 2 key
will change the display to “Norm”.
•“H” means high. “L” means low.
01.F.Br ightness
DssssrssssL	Ho s tD4 D2D3 D1 Norm
HostL4 L3 L2 L1
02.F.Emp
sssrs 	Ho s t hasis
None Smooth Low Medium
HostHigh
03.F.Contrast
LssssrssssH	Ho s tL4 L2L3 L1 Norm
HostH4 H3 H2 H1
  
						

							23
Display Panel Instructions
04    Front side halftone
¤
1The dynamic threshold is not displayed if the DIMM
expansion memory module has not been installed. If the
dynamic threshold is to be used, install a DIMM memory
module which is available on the market.  For details on
how to install it refer to the installation manual.
05    Back side dropout color
•KV-S6055W series only.Color selection
06    Back side brightness
•KV-S6055W series only.•When “Host”  is displayed, pressing the 1 key or the 2 key
will change the display to “Norm”.
•“D” means dark. “L” means light.
07    Back side image emphasis
•KV-S6055W series only.•When “Host”  is displayed, pressing the 1 key or the 2 key
will change the display to “Medium”.
08    Back side contrast
•KV-S6055W series only.•When “Host” is displayed, pressing the 1 key or the 2 key
will change the display to “Norm”.
•“H” means high. “L” means low.
04.F.Ha l
	Ho s t f t one
Binary Host Bayer dither 64 Bayer dither 16
(Dynamic Th.)
Halftone dot 32 Error diffusionHalftone dot 64

¤1
05 .B.Co l
	Ho s t or dropGreen Red Host
06 .B.Br ightness
DssssrssssL	Ho s tD4 D2D3 D1 Norm
HostL4 L3 L2 L1
07 .B.Emp
sssrs 	Ho s t hasis
None Smooth Low Medium
HostHigh
08 .B.Contrast
LssssrssssH	Ho s tL4 L2L3 L1 Norm
HostH4 H3 H2 H1   
 
  
        
						

							24
Display Panel Instructions
09    Back side halftone
•KV-S6055W series only. 
¤
1The dynamic threshold is not displayed if the DIMM
expansion memory module has not been installed. If the
dynamic threshold is to be used, install a DIMM memory
module which is available on the market.  For details on how
to install it refer to the installation manual.
10    Noise reduction
B1 
a 1TB6 a 6   : Scanner reduces a black dot.
W1 
a 1TW6 a 6 : Scanner reduces a white dot.
11    Black line removal
•This setting is valid only when the white roller kit is installed.
12    Scanning mode
Fit to Page  :
Actual         :Scanner shrinks image to fit scanned page.
Scanner scans at 100% actual page size. 
Some of the data on the edges of the page may be
lost.
13    Double feed detection
If set to “Detect”, the scanner will sound a buzzer and the power
indicator will flash red when double feeding is detected. Even if
this buzzer is set to “OFF” in “Setting the buzzer” (see page 30),
it will still ring.
•When scanning very important documents, confirm if the
number of scanned pages displayed on the LCD matches the
number of actual pages.
09 .B.Ha l
	Ho s t f t one
Binary Host Bayer dither 64 Bayer dither 16
(Dynamic Th.)
Halftone dot 32 Error diffusionHalftone dot 64

¤1
 
10 . No i seReduc t .
rssssss 	Ho s tNone Host B151B252
B353
B454B555
B656W151W252
W353W454W555W656
1 1 . BLK L
Remove	Ho s t ine
Disable Host Enable
12 . Scan
	Ho s t ning	Mode
Fit to Page Host Actual
13 . Doub l
	Ho s t e Feed
Not detect Host Detect
   
						

							25
Display Panel Instructions
•When scanning very important documents, confirm if the number of scanned pages displayed on the LCD
matches the number of actual pages.
•Thick, creased, or edited documents with correction fluid as well as documents with holes near the center may
give you false double feed warning.
•When scanning a document which is shorter than 210 mm/8.3 (A5 size) in length, double feed detection will
not work well. 14    Setting the “Double Feed” detector 
action
Host : The scanner will act in response to commands from 
the host computer.
Stop : The scanner will display double feed error and stop 
when it detects double feeding.
Buzzer
  : When the scanner detects double feeding, it will 
sound a buzzer, the power indicator will light red and 
it will continue scanning.
After completing scanning, the scanner will display 
double feeding warning.  
15    Setting the “Double Feed” detector 
sensitivity 
Low sensitivity : The double feed detector’s sensitivity will be
low. Set this when there is an error for no
double feeding.
High sensitivity : The double feed detector’s sensitivity will be
high. Set this when there is no error for
double feeding.  
16    Feed speed 
Fast : The scanner scans approximately 1.3 times faster
than when “Normal” is set, at a resolution ranging
from 200dpi to 400dpi.  For example, when the
resolution is 200dpi, the scanner scans at 200dpi  
a  
150dpi, but outputs the image at 200dpi  
a  
 200dpi.
However, the image quality produced by “Fast” is
inferior to the image quality produced by “Normal”.
Slow  : The scanner scans at half of the “Normal” speed. 
17    Setting the “Detect Skew” 
Detect : If the document is not moving straight, scanning
will stop and “U20 Skew Error” will be displayed.
Not detect : The document will be scanned even if it is not
moving straight.
14 . Doub l
Ac t i on	Ho s t e Feed
Stop Host Buzzer
15 . Doub l
H  o   s   t e Feed
S  e   n   s   .
Low sensitivity Sens. Host
Normal Sens. High sensitivity
16 . Feed
	Ho s t Speed
Slow Host NormalFast
17.Detec t
Ho s t Sk ew
Not detect Host Detect 
						

							 
26  Display Panel Instructions 
• 
Scanning settings 01-18 must be saved using setting “19 Save Scanning Settings (Execution)”. 
Even if they are not saved, they will be applied. If the power is turned off, the next time the unit is used they will
not be applied.  18    Scanning method 
  Host : The documents placed either on the ADF or on the
flatbed are scanned in response to commands from
the host computer.
FB : The documents placed on the flatbed are scanned.
  19    Save “Scanning Settings” 
(Select memory)
19    Save “Scanning Settings” 
(Execution) 
When pressing the  
1
 
 key and the  
2
 
 key simultaneously, the
scanning conditions set in 01 to 18 above will be saved in the
memory selected in the “Save Scanning Settings (Select
memory)”.
“Completed” will be displayed after saving. 
20    Load scanning setting 
• 
If you use the  
1
 
 key or the  
2
 
 key to select Memory 1 or
Memory 2, the saved scanning items will become valid by
the “Save Scanning Settings (Execution)”.  
If other scanning items have been saved in another memory,
during scanning you can change the scanning items easily.
This setting will not be changed even if the power is turned
off and on, and will remain valid. 
• 
If “Default” is selected, all of the saved scanning settings will
return to the default values. (See “01” to “18” of the left side
display.)
18 . Scan
	Ho s t  Metho d 
FB Host
19 . SaveSe t t i n g
Memo r y 1
 
Memory 1 Memory 2
19 . Save
Execl Se t t i n g
20 . Load
Defaul t Se t t i n g
Memory 1 Memory 2 Default 
						

							 
27 
Display Panel Instructions 
Counter setting menu (by pressing the COUNTER key) 
Number, mode and default display  
• 
Pressing the  
3
 
 key will change to the
next mode.  
• 
Pressing the  
4
 
 key will change to the
previous mode.  
Contents 
• 
Pressing the  
1
 
 key or the  
2
 
 key will change to another value.  
01     
Select the counter displayed on the 
LCD
 
Scan :After scanning one time, the scanner counter will be
cleared.
User : This counter is set to the default value.
The user counter extender is also set by the user.
They will be cleared when the power is turned OFF.  
02    Setting the user counter 
Pressing the  
1
 
 key once will increase the user counter by one.
Pressing the  
2
 
 key once will decrease the user counter by one.
Pressing the  
1
 
 key or the  
2
 
 key continuously will change the
user counter value by increments of 10.  
02    Setting the “User Counter 
Extender” 
Pressing the  
1
 
 key once will increase the user counter extender
by one. Pressing the  
2
 
 key once will decrease the user counter
extender by one.  
02    Clear the “User Counter” 
When pressing the  
1
 
 key and the  
2
 
 key simultaneously, the
user counter will be cleared.
Then “Completed” will be displayed.  
03    Displaying the system counter 
(ex.)Displays the total amount of scanned documents up to now.
01 . D i sp .
	Sc an Counter
User Scan
02 . Use r  
	0 Counter
02 . Use r
+1 Counter
r2 r1r3......
r8 r7
r9
02 . Use r
Cl earl Counter
03 . Sy s t e
1234567 m Coun t . 
						

							 
28 
Display Panel Instructions 
Imprinter setting menu (by pressing the IMPRINT key) 
These setting can be done only when a imprinter unit is installed. 
. 
Number, item and default display 
• 
Pressing the  
3
 
 key will change to the
next mode. 
• 
Pressing the  
4
 
 key will change to the
previous mode. 
Contents 
• 
Pressing the  
1
 
 key or the  
2
 
 key will change to another
value.  
01    Setting the imprinter data 
• 
This setting can be done only when a
imprinter is installed.Host : Printing will be done according to the host computer.
Count : Printing will be done according to the counter in the
“Select the counter displayed on the LCD”.  
02    Setting the imprinter position 
• 
This setting can be done only when a
imprinter is installed.By pressing the  
1
 
 key or the  
2
 
 key, you can specify the line
where printing starts from the top of the document.
If “0” character is set, printing starts from 10.0 mm. 
The millimeter value displayed is an approximation.
The length per character varies, depending on the 04
orientation setting.
90°or 270°: 2.40mm per character
0°or 180°: 3.46mm per character
Character: 0 - 72 
• 
In this example, printing starts at 12.4 mm (approx, 1/2 in.)
from the top of the paper. The number 12.4 can be changed
from 10.0 to 182.8 by pressing the  
1
 
 key or the  
2
 
 key.  
03    Setting the imprinter font style 
• 
This setting can be done only when a 
imprinter is installed. 
Bold :
 
2-dot font
Normal: 1-dot font that can increase the ink lifetime longer than
Bold fonts
01 . P r e I
	Ho s t mp r i n t
Count Host
02 . P r e P
H osition
os t
02 . P r e Position
< 1Ch a r >
12.4mm
Top of the paper Top of the paper
Top of the
printout
ABCD ......
ABCD ......Top of the
printout
10mm (Default)
12.4mm
Approx.
1/2 in.Approx.
13/32 in.
03 . P r e F
	Ho s t on t
Normal Bold Host 
						

							29
Display Panel Instructions
04    Setting the imprinter orientation
•This setting can be done only when an
imprinter is installed.
04 . P r e R
	Ho s t otate
Host 0o90o180o270o
A
B
A
B
AB
AB
:Transfer direction
Prints portrait orientation.
Rotates character string 90 degrees and prints.
Prints portrait orientation from the end of 
the character string.
Rotates character string 270 degrees and prints.
0x
90x
180x
270x 
 
						

							30
Display Panel Instructions
“Others”setting menu (by pressing the OTHERS key)
Number, mode and default display
•Pressing the 3 key will change to the
next mode. 
•Pressing the 4 key will change to the
previous mode.Contents 
•Pressing the 1 key or the 2 key will change to another value.
01    Checking the VersionMX.XX : Displays the mechanical control firmware version.
FX.XX : Displays the imprinter firmware version.
If an imprinter unit is not installed, the firmware version 
will not be displayed.
02   Setting the “Buzzer” 
03    Setting the SCSI ID 
•Setting the SCSI ID will be activated after turning the power off
and turning it on again. 
04    Setting the “Terminator”
When the scanner is located to terminal position on SCSI bus,
set to “Enable”. 
•Setting the terminator will be activated after turning the power
off and turning it on again.
•The internal terminator works only when the units power has
been turned on. If the PC is to be used while the unit’s power is
off, be absolutely sure to install an external terminator which is
available on the market.
05    Setting the transfer rate
•Changes the maximum value of the synchronous transfer rate
of the SCSI interface.
•Lower the synchronous transfer rate to 10 Mbytes/sec. if the
computer has failed to recognize the scanner or the scanner
fails to operate properly.
01 . Ve r s i
MX.XXFX.XX on
02 . Buzze
	ON r
OFF ON
0 3 . SCS I
		No.6 ID
2 135 467
0
04.Termi
E n a b   l   e nator
DisableEnable
05.TransferR	ate
2	0MB y t e	/s	ec20MByte/sec10MByte/sec