Panasonic Projector PT-DS12KU User Manual

Chapter 6 Appendix — Technical information
ENGLISH - 171
Channel Control detailsPerformanceParameter Initial value Remark
10 CUSTOM MASKING OFF
0
- 31
255(Only for PT
-

DZ13KU, 
PT
-

DS12KU)
To use this function, the 
optional Upgrade Kit (Model 
No.: ET
-

UK20) is required.
[PC
- 1]32
- 63
[PC
- 2]64
- 95
[PC
- 3]96
- 127
No operation 128
- 255
11 Lock Operation not available 0
- 1270When “Operation not 
available” is set, operations 
of all channels become 
unacceptable.
Operation available
128
-...

Chapter 6 Appendix — Technical information
172 - ENGLISH
 rReceived data
Header Data sectionTermination 
symbol
Command  example ‘0’
0x30 ‘0’
0x30 Control command
(ASCII string) (CR)
0x0d
Data length 1
 
byte 1
  byte Undefined length 1
  byte
 rError response
String DetailsTermination 
symbol
Message “ERR1” Undefined control command
(CR)
0x0d
“ERR2” Out of parameter range
“ERR3” Busy state or no-acceptable period
“ERR4” Timeout or no-acceptable period
“ERR5” Wrong data length
“ERRA” Password mismatch...

Chapter 6 Appendix — Technical information
ENGLISH - 173
 rError response
String DetailsTermination 
symbol
Message “ERR1” Undefined control command
(CR)
0x0d
“ERR2” Out of parameter range
“ERR3” Busy state or no-acceptable period
“ERR4” Timeout or no-acceptable period
“ERR5” Wrong data length
“ERRA” Password mismatch
Data length 4
  bytes ―1
  byte
/ terminal
The / terminal of the projector conforms with RS-232C so that the projector can be connected to and controlled 
from a computer .
Connection...

Chapter 6 Appendix — Technical information
174 - ENGLISH
D-Sub 9-pin (male)Outside view Pin No.
Signal name Details
(6) (9)
(1) (5)
(1)
―NC
(2) RXDReceived data
(3) TXDTransmitted data
(4) ―NC
(5) GNDEarth
(6) ―NC
(7) RTS
Connected internally
(8) CTS
(9) ―NC
Communication conditions (Factory default)
Signal level RS - 232C-compliant
Sync. method Asynchronous
Baud rate 9
  600   bps
Parity None
Character length 8 bits
Stop bit 1 bit
X parameter None
S parameter None
Basic format
Transmission from the...

Chapter 6 Appendix — Technical information
ENGLISH - 175
Attention
 fIf a command is transmitted after the lamp starts illuminating, there may be a delay in response or the command may not be executed.  T ry 
sending or receiving any command after 60 seconds.
 f When transmitting multiple commands, be sure to wait until 0.5 seconds has elapsed after receiving the response from the projector before 
sending the next command. When transmitting a command which does not need a parameter , a colon (:) is not...

Chapter 6 Appendix — Technical information
176 - ENGLISH
Control command
The following table lists the commands that can be used to control the projector using a computer.
 rProjector control command
Command Details Parameter/response 
string Remark (parameter)
PON Power on ―To check if the power is on, use the “Power query” command.
POF Power standby
QPW Power query 000
001STANDBY
Power on
IIS Switching the input 
signal VID
VIDEO
RG1 RGB1
RG2 RGB2
DVI DVI
- D
HD1 HDMI
SD1 SDI1 (only for PT
-

DZ13KU,...

Chapter 6 Appendix — Technical information
ENGLISH - 177
 rLens control command
Command Sub command Details Remark
VXX LNSI2 Lens H shift
+00000 = Fine adjustment 1+, +00001 = Fine adjustment 1
-, +00100 
= Fine adjustment 2+, +00101 = Fine adjustment 2-, +00200 = Coarse 
adjustment+, +00201 = Coarse adjustment-
VXX LNSI3 Lens V shift
VXX LNSI4 Lens focus
VXX LNSI5 Lens zoom
 terminal
It is possible to control the projector remotely (by external contact) from a control panel located away from the...

Chapter 6 Appendix — Technical information
178 - ENGLISH
Two-window display combination list
Sub window
RGB1 RGB2
VIDEO 
input
Main window RGB Movie
*3Y/C input RGB Movie*3
RGB1RGB
―――
lll
Movie*3― ――
la a
Y/C input ―――
la ―
RGB2 RGB
lll―
―
l
Movie
*3l a a ―
―
a
VIDEO input la ―
la ―
DVI
-
D RGB
*2l
lllll
Movie
*1l a a la a
HDMI RGB
*2l
lllll
Movie
*1l a a la a
SDI1
*4/SDI*6l a a la a
SDI2
*5l a a la a
Dual link HD
-
SDI
*7― ―
a ―
―
a
Sub window
DVI
-
D HDMI
SDI1
*4SDI2*5Dual link 
HD - SDI*7Main window...

Chapter 6 Appendix — Technical information
ENGLISH - 179
Upgrade Kit
(Only for PT-DZ13KU, PT- DS12KU)
If the optional Upgrade Kit (Model No.: ET
-
 UK20) is applied, the following functions are extended.
FunctionStandard status When the Upgrade Kit is applied
Adjustment range of 
[VERTICAL KEYSTONE] Maximum of ±40°
*1Maximum of ±45°*1
Adjustment range of 
[HORIZONTAL KEYSTONE] Maximum of ±15°*1Maximum of ±40°*1
Adjustment range of 
[CURVED] Vertical arc, Maximum ±50°*1
Horizontal arc, Maximum...

Chapter 6 Appendix — Technical information
180 - ENGLISH
ModeResolution
(Dots) Scanning freq.Dot clock 
freq.
(MHz)Format Plug and play
*1
Horizontal
(kHz)Vertical(Hz)RGB2 DVI - D
HDMIEDID1 EDID2 EDID3
SVGA 800   x   600 35.2 56.3 36.0
R/D/H
l―
l l l
800   x   600 37.9 60.3 40.0
R/D/H
l―
l l l
800   x   600 48.1 72.2 50.0 R/D/H
l―
l l l
800
  x   600 46.9 75.0 49.5 R/D/H
l―
l l l
800
  x   600 53.7 85.1 56.3 R/D/H ― ― ― ― ―
MAC16 832
  x   624 49.7 74.6 57.3 R/D/H
l―
l l l
XGA 1
  024   x   768 39.6 50.0...