Panasonic Projector Pt L759xu Operating Instructions

31
Adjusting the White Balance
The picture may become over-saturated with red or blue color, and the white color may not be at the desired degree
of whiteness. In such cases, adjust the white balance by the following p\
rocedure. 
The procedure and on-screen display as shown below are based on RGB as t\
he input signal from a personal computer. 
(See page  17.)
Adjustment item Button
Adjustment Details Adjustment Range
Press 
 button.
Press 
 button.
Press 
 button.
Press 
 button.
Press 
 button.
Press...

32
When RGB input signal picture is projected from a Personal Computer. It is possible to adjust the Vertical position,
Horizontal position, Dot clock and Phase automatically (Effective only at the time of image is projected of RGB signal
input except DTV format signal).
Using the Auto Setup Feature
• Selecting procedure (for on-screen display operation)
0
0
0 1
1
1 +
+
+
0 1       
 
 
   
 
 
   
 
 
  p
n
n
  u
o
o
k t
i
i
c e
t
t
o S
i
i
l  
s
s
C
e
t o
o
o
 
s
e t
P
P
t
a
s u
 
 
o
h
e A
H
V
D
P
R...

33
Adjusting the Image Position, Dot Clock and Phase
Confirm the picture position, Dot Clock, and Phase. If the picture is not correctly positioned within the display area of the
screen (the edge of the picture does not appear), adjust the picture position. (This only applies for RGB, YP
BPR, DVI-D
[PT-L759XU only] input signal.) The items which can be adjusted will vary depending on the type of input signal. The
procedure and on-screen display as shown below are based on RGB as the input signal from a...

34
Using Other Useful Functions
You may use buttons on the LCD Projector or remote control for the following operations.
 Selecting the Language for On-Screen Displays
The language of the LCD Projector is set to English as the factory setting. To select one of six different languages for
on-screen displays, follow the instructions below. The procedure below describes the on-screen displays when the S-
VIDEO signal or the VIDEO signal is being projected. (See page 17.)
• Selecting procedure (select...

35
 Changing to 16:9 (wide) screen format
When a S-VIDEO/VIDEO or DTV Format (RGB, YPBPR) signals is input, the image can be displayed in 16:9 (wide)
screen by the following procedure. This only applies for S-VIDEO/VIDEO and DTV Format signal. The procedure below
describes the on-screen displays when the S-VIDEO signal or the VIDEO signal is being projected. (See page 17.)
• Selecting procedure
t
 
e c
r
p e
e
a l
t
c e
n
s S
E
E :
:
:  
R  
E
U  
T
N  
N
E  
E
M
     
m  
e
 
 
n  
t
 
 
o  
s
 
 
i...

36
 Auto Lamp Off
The power save function operates as follows: If the projector continues projecting for 15 minutes or more while there is
no input signal to be projected, the light source will shut off automatically to save power. And, the projector will enter
standby mode. At the time of shipment from the factory, the Auto Lamp Off function is set YES, so that if you will not use
this function, you can turn it off by the following procedure. The procedure and on-screen display as shown below are
based...

37
t
 
e c
r
p e
e
a l
t
c e
n
s S
E
E :
:
:  
R  
E
U  
T
N  
N
E  
E
M
 
n  
o  
i  
t  
a
 
 
n  
z
 
 
o  
i
 
 
i  
n
n
e
t e
o
o
g
a r
r
i
a
m u
h
t
u
r t
c
c
g
o c
n
n
n
f i
y
u
a
n P
S
F
L
I
8
z
z
h 6
H
H
0 7
K
5
1  
9
8 x
.
  4
8 2
6 0 1  
 
 
e  
y
y
m s
c
c
i t
n
n
t o
e
e
n D
u
u
u  
q
q
R f
e
e o
r
r
p .
F
F
m o
 
 
a N
H
V
L
e p a c s E : U N E M
1Press MENU to display the menu.
2Press  or  to select “Information”.
3Press ENTER to display the screen.
No. of Dots
H Frequency
V Frequency...

38
 Digital Zoom
You can enlarge and project specific portions of the input picture and select the enlargement ratio for this portion using
the D.ZOOM +/- buttons on the remote control unit.
• You can enlarge the center portion of the image to one of 6 magnifications.
• Changing the input signal while digital zoom is in use will cancel digital zoom. (Remote Control
Unit)
• Press D.ZOOM + button the picture will become bigger.
• Press D.ZOOM  - button the picture will become smaller.
•Use the  and  arrow...

39
Projecting the DTV Format Signal
A DTV Format Signal, such as DVD or digital broadcast, etc. can be input and projected with this Projector. When using
this function, please refer to page 43 to correctly connect to the output device of the DTV Format Signal and perform the
following settings correctly.
 Setting of the RGB1/YPBPR Input Signal Selection
This LCD Projector allows input of RGB or YPBPR signal (Component input signal) to the RGB1/YPBPR input
terminal, but you will need to change the...

40
Changing the RGB2 IN/RGB1 OUT Terminal
• Setting procedure
t
 
e c
r
p e
e
a l
t
c e
n
s S
E
E :
:
:  
R  
E
U  
T
N  
N
E  
E
M
 
n  
o  
i  
t  
a
 
 
n  
z
 
 
o  
i
 
 
i  
n
n
e
t e
o
o
g
a r
r
i
a
m u
h
t
u
r t
c
c
g
o c
n
n
n
f i
y
u
a
n P
S
F
L
I1Press MENU to display the menu.
2Press  or  to select “Function”, and then ENTER to
display the screen.
3Press  or  to select “RGB2 IN/RGB1 OUT”, and then
ENTER
 to display the screen.
• Press MENU to remove the setup screen and menu.
• When reset is...