Panasonic Projector PT-RX110 User Manual

							Chapter 2 Getting Started — Setting up
ENGLISH - 41
 rWhen the screen aspect ratio is 16:9
(Unit: m)
Lens type Standard zoom 
lens Optional lens
Fixed-focus Lens Ultra short focus 
zoom lens Short focus zoom 
lens
Projection lens Model No. —ET
-

DLE030
*2ET-DLE055ET-DLE085 ET- DLE150
Throw ratio*11.8-2.5:1 0.40:10.8:1 0.8 - 1.0:1 1.4 - 2.0:1
Projected image size Projection 
distance (L)
Projection  distance  (L1)Distance between projector and  screen Projection distance (L)
Diagonal (SD) Height 
(SH) Width 
(SW) Min.
(LW) Max.
(LT) (L4) (A1) Fixed Min.
(LW) Max.
(LT) Min.
(LW) Max.
(LT)
1.27 (50") 0.623 1.107 1.97 2.78 ― ― ― 0.90 0.89 1.12 1.49 2.18
1.52 (60") 0.747 1.328 2.38 3.35― ― ― 1.09 1.08 1.351.80 2.62
1.78 (70") 0.872 1.550 2.79 3.92 ― ― ― 1.27 1.27 1.59 2.11 3.07
2.03 (80") 0.996 1.7713.19 4.49 ― ― ― 1.46 1.46 1.82 2.42 3.51
2.29 (90") 1.121 1.992 3.60 5.06 ― ― ― 1.65 1.65 2.05 2.72 3.96
2.54 (100") 1.245 2.214 4.01 5.63 0.88 0.18 0.67 1.84 1.83 2.29 3.03 4.40
3.05 (120") 1.494 2.657 4.83 6.77 1.06 0.35 0.82 2.22 2.21 2.75 3.65 5.29
3.81 (150") 1.868 3.321 6.05 8.49 1.32 0.62 1.05 2.79 2.78 3.45 4.58 6.63
5.08 (200") 2.491 4.428 8.10 11.34 1.76 1.06 1.42 3.733.72 4.61 6.12 8.86
6.35 (250") 3.113 5.535 10.14 14.19 2.20 1.50 1.79 ― 4.66 5.78 7.66 11.08
7.62 (300") 3.736 6.641 12.18 17.04 2.64 1.94 2.17 ― 5.60 6.94 9.21 13.31
8.89 (350") 4.358 7.748 14.23 19.90 3.08 2.38 2.54 ― 6.54 8.11 10.75 15.53
10.16 (400") 4.981 8.855 16.27 22.75 ― ― ― ― 7.48 9.27 12.29 17.76
12.70 (500") 6.226 11.069 20.35 28.45 ― ― ― ― 9.36 11.60 15.38 22.21
15.24 (600") 7.472 13.283 24.44 34.16 ― ― ― ― 11.24 13.93 18.46 26.66
Lens type Optional lens
Height position (H)*3Intermediate 
focus zoom lens Long focus zoom 
lens Ultra long focus 
zoom lens
Projection lens Model No. ET
-

DLE250 ET
-
 DLE350 ET
-
 DLE450 Standard zoom lens/ET
-

DLE085/
ET
-

DLE150/
ET
-

DLE250/
ET
-

DLE350/
ET
-

DLE450ET
-

DLE055
(Fixed)
Throw ratio
*12.4-3.8:1 3.8
- 5.7:1 5.6 - 9.0:1
Projected image size Projection distance (L)
Diagonal (SD) Height 
(SH) Width 
(SW) Min.
(LW) Max.
(LT) Min.
(LW) Max.
(LT) Min.
(LW) Max.
(LT)
1.27 (50") 0.623 1.107 2.62 4.18 4.11 6.29 6.13 9.87
-0.14 - 0.46 0.31
1.52 (60") 0.747 1.328 3.155.03 4.96 7.577.42 11.90-0.16 - 0.55 0.37
1.78 (70") 0.872 1.550 3.69 5.88 5.81 8.85 8.70 13.94-0.19 - 0.64 0.44
2.03 (80") 0.996 1.7714.23 6.73 6.66 10.14 9.99 15.97-0.22 - 0.73 0.50
2.29 (90") 1.121 1.992 4.77 7.58 7.5111.42 11.28 18.00-0.25 - 0.82 0.56
2.54 (100") 1.245 2.214 5.318.43 8.36 12.71 12.56 20.04-0.27 - 0.91 0.62
3.05 (120") 1.494 2.657 6.39 10.14 10.06 15.27 15.14 24.11-0.33 - 1.10 0.75
3.81 (150") 1.868 3.321 8.01 12.69 12.61 19.13 18.99 30.21-0.41 - 1.37 0.93
5.08 (200") 2.491 4.428 10.70 16.95 16.86 25.55 25.43 40.38-0.55 - 1.83 1.25
6.35 (250") 3.113 5.535 13.40 21.21 21.11 31.97 31.86 50.54-0.68 - 2.28 ―
7.62 (300") 3.736 6.641 16.09 25.46 25.36 38.39 38.29 60.71-0.82 - 2.74 ―
8.89 (350") 4.358 7.748 18.79 29.72 29.61 44.81 44.72 70.88-0.96 - 3.20 ―
10.16 (400") 4.981 8.855 21.48 33.98 33.86 51.23 51.16 81.05-1.10 - 3.65 ―
12.70 (500") 6.226 11.069 26.87 42.49 42.35 64.07 64.02 101.39-1.37 - 4.57 ―
15.24 (600") 7.472 13.283 32.26 51.00 50.85 76.91 76.88 121.73-1.64 - 5.48 ―
*1 The throw ratio is based on the value during projection of 2.03   m (80") projected image size. When the Fixed-focus Lens (Model No.: ET- DLE030) is 
attached, the throw ratio is based on the value during projection of 2.54   m (100") projected image size.
*2
 
When the Fixed-focus Lens (Model No.: ET-
 DLE030) is attached, the projection relation between the screen and the projector dif fers from that of 
other lenses. Refer to “For the Fixed-focus Lens (Model No.: ET
-

DLE030)” (x
  page   34) for details.
*3
 
When the Fixed-focus Lens (Model No.: ET-
 DLE055) is attached, the lens shift is not possible, therefore the height position (H) becomes SH/2.  
						

							Chapter 2 Getting Started — Setting up
42 - ENGLISH
 rWhen the screen aspect ratio is 4:3
(Unit: m)
Lens type Standard zoom 
lens Optional lens
Fixed-focus Lens Ultra short focus 
zoom lens Short focus zoom 
lens
Projection lens Model No. —ET
-

DLE030
*2ET-DLE055ET-DLE085 ET- DLE150
Throw ratio*12.2-3.0:1 0.48:11.0:1 1.0 - 1.2:1 1.6 - 2.4:1
Projected image size Projection 
distance (L)
Projection  distance  (L1)Distance between projector and  screen Projection distance (L)
Diagonal (SD) Height 
(SH) Width 
(SW) Min.
(LW) Max.
(LT) (L4) (A1) Fixed Min.
(LW) Max.
(LT) Min.
(LW) Max.
(LT)
1.27 (50") 0.762 1.016 2.18 3.07 ― ― ― 0.99 0.99 1.24 1.65 2.40
1.52 (60") 0.914 1.219 2.63 3.70 ― ― ― 1.20 1.20 1.50 1.99 2.89
1.78 (70") 1.067 1.422 3.08 4.33 ― ― ― 1.41 1.40 1.752.33 3.38
2.03 (80") 1.219 1.626 3.534.95 ― ― ― 1.62 1.61 2.01 2.67 3.87
2.29 (90") 1.372 1.829 3.98 5.58 ― ― ― 1.82 1.82 2.26 3.00 4.36
2.54 (100") 1.524 2.032 4.42 6.21 0.97 0.27 0.67 2.03 2.03 2.52 3.34 4.85
3.05 (120") 1.829 2.438 5.32 7.47 1.170.46 0.82 2.45 2.44 3.03 4.02 5.83
3.81 (150") 2.286 3.048 6.67 9.35 1.46 0.75 1.05 3.07 3.06 3.80 5.04 7.31
5.08 (200") 3.048 4.064 8.92 12.49 1.94 1.24 1.42 4.11 4.10 5.09 6.74 9.76
6.35 (250") 3.810 5.080 11.1715.64 2.42 1.72 1.79 ― 5.136.37 8.44 12.21
7.62 (300") 4.572 6.096 13.42 18.78 2.91 2.20 2.17 ― 6.17 7.65 10.14 14.66
8.89 (350") 5.334 7.112 15.67 21.92 3.39 2.69 2.54 ― 7.21 8.93 11.84 17.11
10.16 (400") 6.096 8.128 17.92 25.06 ― ― ― ― 8.24 10.22 13.54 19.56
12.70 (500") 7.620 10.160 22.42 31.34 ― ― ― ― 10.31 12.78 16.94 24.47
15.24 (600") 9.144 12.192 26.92 37.63 ― ― ― ― 12.39 15.3520.34 29.37
Lens type Optional lens
Height position (H)*3Intermediate 
focus zoom lens Long focus zoom 
lens Ultra long focus 
zoom lens
Projection lens Model No. ET
-

DLE250 ET
-
 DLE350 ET
-
 DLE450 Standard zoom lens/ET
-

DLE085/
ET
-

DLE150/
ET
-

DLE250/
ET
-

DLE350/
ET
-

DLE450ET
-

DLE055
(Fixed)
Throw ratio
*12.9-4.6:1 4.5
- 6.9:1 6.8 - 10.8:1
Projected image size Projection distance (L)
Diagonal (SD) Height 
(SH) Width 
(SW) Min.
(LW) Max.
(LT) Min.
(LW) Max.
(LT) Min.
(LW) Max.
(LT)
1.27 (50") 0.762 1.016 2.89 4.61 4.54 6.94 6.78 10.90
-0.08 - 0.50 0.38
1.52 (60") 0.914 1.219 3.48 5.555.48 8.35 8.20 13.14-0.09 - 0.60 0.46
1.78 (70") 1.067 1.422 4.08 6.48 6.42 9.76 9.61 15.38-0.11 - 0.70 0.53
2.03 (80") 1.219 1.626 4.67 7.42 7.3511.18 11.03 17.62-0.12 - 0.80 0.61
2.29 (90") 1.372 1.829 5.26 8.36 8.29 12.59 12.45 19.86-0.14 - 0.91 0.69
2.54 (100") 1.524 2.032 5.86 9.30 9.22 14.01 13.87 22.10-0.15 - 1.01 0.76
3.05 (120") 1.829 2.438 7.04 11.1711.09 16.83 16.70 26.58-0.18 - 1.21 0.91
3.81 (150") 2.286 3.048 8.82 13.98 13.90 21.08 20.95 33.30-0.23 - 1.51 1.14
5.08 (200") 3.048 4.064 11.79 18.67 18.58 28.15 28.03 44.49-0.30 - 2.01 1.52
6.35 (250") 3.810 5.080 14.76 23.36 23.26 35.22 35.12 55.69-0.38 - 2.51 ―
7.62 (300") 4.572 6.096 17.7328.05 27.94 42.29 42.20 66.89-0.46 - 3.02 ―
8.89 (350") 5.334 7.112 20.70 32.74 32.62 49.36 49.28 78.09-0.53 - 3.52 ―
10.16 (400") 6.096 8.128 23.67 37.42 37.30 56.43 56.37 89.29-0.61 - 4.02 ―
12.70 (500") 7.620 10.160 29.60 46.80 46.65 70.57 70.53 111.68-0.76 - 5.03 ―
15.24 (600") 9.144 12.192 35.54 56.17 56.01 84.71 84.70 134.08-0.91 - 6.04 ―
*1 The throw ratio is based on the value during projection of 2.03   m (80") projected image size. When the Fixed-focus Lens (Model No.: ET- DLE030) is 
attached, the throw ratio is based on the value during projection of 2.54   m (100") projected image size.
*2
 
When the Fixed-focus Lens (Model No.: ET-
 DLE030) is attached, the projection relation between the screen and the projector dif fers from that of 
other lenses. Refer to “For the Fixed-focus Lens (Model No.: ET
-

DLE030)” (x
  page   34) for details.
*3
 
When the Fixed-focus Lens (Model No.: ET-
 DLE055) is attached, the lens shift is not possible, therefore the height position (H) becomes SH/2.  
						

							Chapter 2 Getting Started — Setting up
ENGLISH - 43
For PT-RX110
 rWhen the screen aspect ratio is 4:3
(Unit: m)
Lens type Standard zoom 
lens Optional lens
Fixed-focus Lens Ultra short focus 
zoom lens Short focus zoom 
lens
Projection lens Model No. —ET
-

DLE030
*2ET-DLE055ET-DLE085 ET- DLE150
Throw ratio*11.8-2.5:1 0.39:10.8:1 0.8 - 1.0:1 1.3 - 2.0:1
Projected image size Projection 
distance (L)
Projection  distance  (L1)Distance between projector and  screen Projection distance (L)
Diagonal (SD) Height 
(SH) Width 
(SW) Min.
(LW) Max.
(LT) (L4) (A1) Fixed Min.
(LW) Max.
(LT) Min.
(LW) Max.
(LT)
1.27 (50") 0.762 1.016 1.78 2.51 ― ― ― 0.81 0.81 1.01 1.34 1.97
1.52 (60") 0.914 1.219 2.15 3.03 ― ― ― 0.98 0.98 1.22 1.62 2.37
1.78 (70") 1.067 1.422 2.52 3.55― ― ― 1.15 1.151.43 1.90 2.77
2.03 (80") 1.219 1.626 2.89 4.06 ― ― ― 1.32 1.32 1.64 2.18 3.18
2.29 (90") 1.372 1.829 3.26 4.58 ― ― ― 1.49 1.49 1.85 2.46 3.58
2.54 (100") 1.524 2.032 3.63 5.10 0.80 0.10 0.41 1.66 1.66 2.07 2.74 3.98
3.05 (120") 1.829 2.438 4.37 6.13 0.96 0.26 0.50 2.01 2.00 2.49 3.30 4.79
3.81 (150") 2.286 3.048 5.48 7.68 1.20 0.49 0.65 2.52 2.51 3.12 4.14 6.00
5.08 (200") 3.048 4.064 7.3310.26 1.60 0.89 0.88 3.38 3.36 4.18 5.54 8.02
6.35 (250") 3.810 5.080 9.18 12.85 1.99 1.29 1.12 ― 4.21 5.23 6.94 10.03
7.62 (300") 4.572 6.096 11.03 15.43 2.39 1.69 1.36 ― 5.07 6.29 8.33 12.05
8.89 (350") 5.334 7.112 12.88 18.02 2.79 2.09 1.60 ― 5.92 7.34 9.73 14.07
10.16 (400") 6.096 8.128 14.73 20.60 ― ― ― ― 6.77 8.40 11.1316.08
12.70 (500") 7.620 10.160 18.43 25.77 ― ― ― ― 8.48 10.51 13.92 20.12
15.24 (600") 9.144 12.192 22.13 30.94 ― ― ― ― 10.18 12.62 16.72 24.15
Lens type Optional lens
Height position (H)*3Intermediate 
focus zoom lens Long focus zoom 
lens Ultra long focus 
zoom lens
Projection lens Model No. ET
-

DLE250 ET
-
 DLE350 ET
-
 DLE450
Standard 
zoom lens/
ET
-

DLE150/
ET
-

DLE250/
ET
-

DLE350/
ET
-

DLE450
ET- DLE085ET-DLE055
(Fixed)
Throw ratio*12.4-3.7:1 3.7 - 5.6:1 5.5 - 8.9:1
Projected image size Projection distance (L)
Diagonal (SD) Height 
(SH) Width 
(SW) Min.
(LW) Max.
(LT) Min.
(LW) Max.
(LT) Min.
(LW) Max.
(LT)
1.27 (50") 0.762 1.016 2.36 3.78 3.715.68 5.52 8.91 0 - 0.48 0.04 - 0.48 0.38
1.52 (60") 0.914 1.219 2.85 4.55 4.48 6.84 6.69 10.75 0 - 0.58 0.05 - 0.58 0.46
1.78 (70") 1.067 1.422 3.34 5.32 5.25 8.01 7.86 12.60 0 - 0.67 0.05 - 0.67 0.53
2.03 (80") 1.219 1.626 3.83 6.09 6.02 9.17 9.02 14.44 0 - 0.77 0.06 - 0.77 0.61
2.29 (90") 1.372 1.829 4.31 6.86 6.79 10.33 10.19 16.28 0 - 0.86 0.07 - 0.86 0.69
2.54 (100") 1.524 2.032 4.80 7.63 7.56 11.50 11.3518.12 0 - 0.96 0.08 - 0.96 0.76
3.05 (120") 1.829 2.438 5.78 9.17 9.10 13.82 13.68 21.81 0 - 1.15 0.09 - 1.15 0.91
3.81 (150") 2.286 3.048 7.24 11.49 11.41 17.3117.18 27.33 0 - 1.44 0.11 - 1.44 1.14
5.08 (200") 3.048 4.064 9.69 15.34 15.26 23.13 23.00 36.54 0 - 1.92 0.15 - 1.92 1.52
6.35 (250") 3.810 5.080 12.13 19.20 19.11 28.94 28.83 45.75 0 - 2.40 0.19 - 2.40 ―
7.62 (300") 4.572 6.096 14.57 23.06 22.96 34.76 34.66 54.97 0 - 2.88 0.23 - 2.88 ―
8.89 (350") 5.334 7.112 17.01 26.91 26.80 40.57 40.48 64.18 0 - 3.36 0.27 - 3.36 ―
10.16 (400") 6.096 8.128 19.45 30.77 30.65 46.39 46.31 73.39 0 - 3.84 0.30 - 3.84 ―
12.70 (500") 7.620 10.160 24.33 38.48 38.35 58.02 57.96 91.81 0 - 4.80 0.38 - 4.80 ―
15.24 (600") 9.144 12.192 29.22 46.19 46.05 69.65 69.61 110.23 0 - 5.76 0.46 - 5.76 ―
*1 The throw ratio is based on the value during projection of 2.03   m (80") projected image size. When the Fixed-focus Lens (Model No.: ET- DLE030) is 
attached, the throw ratio is based on the value during projection of 2.54   m (100") projected image size.
*2
 
When the Fixed-focus Lens (Model No.: ET-
 DLE030) is attached, the projection relation between the screen and the projector dif fers from that of 
other lenses. Refer to “For the Fixed-focus Lens (Model No.: ET
-

DLE030)” (x
  page   34) for details.
*3
 
When the Fixed-focus Lens (Model No.: ET-
 DLE055) is attached, the lens shift is not possible, therefore the height position (H) becomes SH/2.  
						

							Chapter 2 Getting Started — Setting up
44 - ENGLISH
 rWhen the screen aspect ratio is 16:9
(Unit: m)
Lens type Standard zoom 
lens Optional lens
Fixed-focus Lens Ultra short focus 
zoom lens Short focus zoom 
lens
Projection lens Model No. —ET
-

DLE030
*2ET-DLE055ET-DLE085 ET- DLE150
Throw ratio*11.8-2.5:1 0.39:10.8:1 0.8 - 1.0:1 1.3 - 2.0:1
Projected image size Projection 
distance (L)
Projection  distance  (L1)Distance between projector and  screen Projection distance (L)
Diagonal (SD) Height 
(SH) Width 
(SW) Min.
(LW) Max.
(LT) (L4) (A1) Fixed Min.
(LW) Max.
(LT) Min.
(LW) Max.
(LT)
1.27 (50") 0.623 1.107 1.94 2.74 ― ― ― 0.88 0.88 1.111.47 2.15
1.52 (60") 0.747 1.328 2.34 3.31― ― ― 1.07 1.07 1.34 1.772.59
1.78 (70") 0.872 1.550 2.75 3.87 ― ― ― 1.26 1.25 1.572.08 3.03
2.03 (80") 0.996 1.771 3.154.43 ― ― ― 1.44 1.44 1.79 2.38 3.47
2.29 (90") 1.121 1.992 3.554.99 ― ― ― 1.63 1.62 2.02 2.69 3.90
2.54 (100") 1.245 2.214 3.96 5.56 0.87 0.17 0.66 1.82 1.81 2.25 2.99 4.34
3.05 (120") 1.494 2.657 4.76 6.68 1.04 0.34 0.80 2.19 2.18 2.71 3.60 5.22
3.81 (150") 1.868 3.321 5.97 8.37 1.310.60 1.02 2.75 2.74 3.40 4.51 6.54
5.08 (200") 2.491 4.428 7.99 11.19 1.74 1.03 1.38 3.68 3.67 4.55 6.04 8.74
6.35 (250") 3.113 5.535 10.01 14.00 2.17 1.47 1.75― 4.60 5.70 7.56 10.93
7.62 (300") 3.736 6.641 12.02 16.82 2.61 1.90 2.11 ― 5.52 6.85 9.08 13.13
8.89 (350") 4.358 7.748 14.04 19.63 3.04 2.33 2.48 ― 6.45 8.00 10.61 15.33
10.16 (400") 4.981 8.855 16.05 22.45 ― ― ― ― 7.38 9.15 12.13 17.53
12.70 (500") 6.226 11.069 20.09 28.08 ― ― ― ― 9.24 11.45 15.1721.92
15.24 (600") 7.472 13.283 24.12 33.71― ― ― ― 11.10 13.7518.22 26.31
Lens type Optional lens
Height position (H)*3Intermediate 
focus zoom lens Long focus 
zoom lens Ultra long focus 
zoom lens
Projection lens Model No. ET
-

DLE250 ET
-
 DLE350 ET
-
 DLE450 Standard zoom lens/
ET
-

DLE150/
ET
-

DLE250/
ET
-

DLE350/
ET
-

DLE450ET
-

DLE085
ET-DLE055
(Fixed)
Throw ratio*12.4-3.8:1 3.7 - 5.6:1 5.6 - 8.9:1
Projected image size Projection distance (L)
Diagonal (SD) Height 
(SH) Width 
(SW) Min.
(LW) Max.
(LT) Min.
(LW) Max.
(LT) Min.
(LW) Max.
(LT)
1.27 (50") 0.623 1.107 2.58 4.12 4.06 6.20 6.05 9.74
-0.21 - 0.52-0.16 - 0.52 0.31
1.52 (60") 0.747 1.328 3.114.96 4.90 7.47 7.32 11.74-0.25 - 0.63-0.19 - 0.63 0.37
1.78 (70") 0.872 1.550 3.64 5.80 5.738.74 8.58 13.75-0.29 - 0.73-0.23 - 0.73 0.44
2.03 (80") 0.996 1.7714.18 6.64 6.57 10.00 9.85 15.76-0.33 - 0.84-0.26 - 0.84 0.50
2.29 (90") 1.121 1.992 4.71 7.48 7.41 11.27 11.12 17.76-0.37 - 0.94-0.29 - 0.94 0.56
2.54 (100") 1.245 2.214 5.24 8.32 8.25 12.54 12.39 19.77-0.41 - 1.05-0.32 - 1.05 0.62
3.05 (120") 1.494 2.657 6.30 10.00 9.93 15.07 14.93 23.78-0.49 - 1.26-0.39 - 1.26 0.75
3.81 (150") 1.868 3.321 7.90 12.52 12.44 18.87 18.74 29.81-0.62 - 1.57-0.49 - 1.57 0.93
5.08 (200") 2.491 4.428 10.56 16.72 16.64 25.21 25.09 39.84-0.82 - 2.09-0.65 - 2.09 1.25
6.35 (250") 3.113 5.535 13.22 20.93 20.83 31.54 31.44 49.88-1.03 - 2.62-0.81 - 2.62 ―
7.62 (300") 3.736 6.641 15.88 25.13 25.02 37.88 37.78 59.91-1.23 - 3.14-0.97 - 3.14 ―
8.89 (350") 4.358 7.748 18.54 29.33 29.22 44.22 44.13 69.95-1.44 - 3.66-1.13 - 3.66 ―
10.16 (400") 4.981 8.855 21.20 33.5333.41 50.55 50.48 79.98-1.64 - 4.18-1.30 - 4.18 ―
12.70 (500") 6.226 11.069 26.52 41.93 41.79 63.22 63.17 100.05-2.05 - 5.23-1.62 - 5.23 ―
15.24 (600") 7.472 13.283 31.84 50.33 50.18 75.89 75.87 120.12-2.47 - 6.28-1.94 - 6.28 ―
*1 The throw ratio is based on the value during projection of 2.03   m (80") projected image size. When the Fixed-focus Lens (Model No.: ET- DLE030) is 
attached, the throw ratio is based on the value during projection of 2.54   m (100") projected image size.
*2
 
When the Fixed-focus Lens (Model No.: ET-
 DLE030) is attached, the projection relation between the screen and the projector dif fers from that of 
other lenses. Refer to “For the Fixed-focus Lens (Model No.: ET
-

DLE030)” (x
  page   34) for details.
*3
 
When the Fixed-focus Lens (Model No.: ET-
 DLE055) is attached, the lens shift is not possible, therefore the height position (H) becomes SH/2.  
						

							Chapter 2 Getting Started — Setting up
ENGLISH - 45
Formula for calculating the projection distance per projection lens
To use a projected image size not listed in this manual, check the projected image size SD (m) and use the 
respective formula to calculate projection distance.
The unit of all the formulae is m. (Values obtained by the following calculation formulae contain a slight error.)
When calculating a projection distance using image size designation (value in inches), multiply the value in inches 
by 0.0254 and substitute it into SD in the formula for calculating the projection distance.For PT
-

RZ970
 rStandard zoom lens
Projection lens Model No. Throw ratio Aspect ratio Projection distance (L) formula
Min. (LW) Max. (LT)
― 1.7 - 2.4:1
16:10 = 1.4906 x SD 
- 0.0746 = 2.0814 x SD - 0.0725
1.7 - 2.4:1 16:9 = 1.5320 x SD 
- 0.0746 = 2.1393 x SD - 0.0725
2.1 - 2.9:1 4:3= 1.6874 x SD 
- 0.0746 = 2.3563 x SD - 0.0725
 rZoom lens
Projection lens Model No. Throw ratio Aspect ratio Projection distance (L) formula
Min. (LW) Max. (LT)
ET
-

DLE085 0.8 - 1.0:1
16:10 = 0.6865 x SD 
- 0.0471 = 0.8498 x SD - 0.0442
0.8 - 1.0:1 16:9 = 0.7056 x SD 
- 0.0471 = 0.8735 x SD - 0.0442
0.9 - 1.2:1 4:3= 0.7772 x SD 
- 0.0471 = 0.9621 x SD - 0.0442
ET
-

DLE150 1.3 - 1.9:1
16:10 = 1.1259 x SD 
- 0.0540 = 1.6243 x SD - 0.0498
1.3 - 1.9:1 16:9 = 1.1572 x SD 
- 0.0540 = 1.6695 x SD - 0.0498
1.6 - 2.3:1 4:3= 1.2747 x SD 
- 0.0540 = 1.8388 x SD - 0.0498
ET
-

DLE250 2.3 - 3.6:1
16:10 = 1.9665 x SD 
- 0.0800 = 3.1059 x SD - 0.0792
2.3 - 3.6:1 16:9 = 2.0212 x SD 
- 0.0800 = 3.1923 x SD - 0.0792
2.7 - 4.3:1 4:3= 2.2263 x SD 
- 0.0800 = 3.5161 x SD - 0.0792
ET
-

DLE350 3.6 - 5.4:1
16:10 = 3.1000 x SD 
- 0.1351 = 4.6843 x SD - 0.1346
3.6 - 5.4:1 16:9 = 3.1862 x SD 
- 0.1351 = 4.8146 x SD - 0.1346
4.3 - 6.5:1 4:3= 3.5094 x SD 
- 0.1351 = 5.3030 x SD - 0.1346
ET
-

DLE450 5.4 - 8.6:1
16:10 = 4.6931 x SD 
- 0.3017 = 7.4193 x SD - 0.2991
5.4 - 8.6:1 16:9 = 4.8236 x SD 
- 0.3017 = 7.6256 x SD - 0.2991
6.5 - 10.3:1 4:3= 5.3129 x SD 
- 0.3017 = 8.3992 x SD - 0.2991
 rFixed-focus Lens (Model No.: ET- DLE055)
Projection lens Model No. Throw ratio Aspect ratio Projection distance (L) formula
ET
-
 DLE055 0.8:1
16:10 = 0.6893 x SD 
- 0.0476
0.8:1 16:9 = 0.7084 x SD 
- 0.0476
0.9:1 4:3 = 0.7803 x SD 
- 0.0476
 rFixed-focus Lens (Model No.: ET- DLE030)
Projection lens Model No. Throw ratio Aspect ratio Projection distance (L1) 
formula Formula for distance between 
projector and screen (A1)
ET
-

DLE030 0.38:1
16:10 = 0.3205 x SD + 0.0047 = 0.1977 x SD 
- 0.0721
0.38:1 16:9 = 0.3294 x SD + 0.0047 = 0.2304 x SD 
- 0.0721
0.46:1 4:3= 0.3628 x SD + 0.0047 = 0.2238 x SD 
- 0.0721  
						

							Chapter 2 Getting Started — Setting up
46 - ENGLISH
For PT-RW930
 rStandard zoom lens
Projection lens Model No. Throw ratio Aspect ratio Projection distance (L) formula
Min. (LW) Max. (LT)
― 1.8 - 2.5:1
16:10 = 1.5651 x SD 
- 0.0746 = 2.1855 x SD - 0.0725
1.8 - 2.5:1 16:9 = 1.6086 x SD 
- 0.0746 = 2.2462 x SD - 0.0725
2.2 - 3.0:1 4:3= 1.7715 x SD 
- 0.0746 = 2.4736 x SD - 0.0725
 rZoom Lens
Projection lens Model No. Throw ratio Aspect ratio Projection distance (L) formula
Min. (LW) Max. (LT)
ET
-

DLE085 0.8 - 1.0:1
16:10 = 0.7209 x SD 
- 0.0471 = 0.8923 x SD - 0.0442
0.8 - 1.0:1 16:9 = 0.7409 x SD 
- 0.0471 = 0.9171 x SD - 0.0442
1.0 - 1.2:1 4:3= 0.8159 x SD 
- 0.0471 = 1.0100 x SD - 0.0442
ET
-

DLE150 1.4 - 2.0:1
16:10 = 1.1822 x SD 
- 0.0540 = 1.7055 x SD - 0.0498
1.4 - 2.0:1 16:9 = 1.2151 x SD 
- 0.0540 = 1.7529 x SD - 0.0498
1.6 - 2.4:1 4:3= 1.3381 x SD 
- 0.0540 = 1.9304 x SD - 0.0498
ET
-

DLE250 2.4 - 3.8:1
16:10 = 2.0649 x SD 
- 0.0800 = 3.2612 x SD - 0.0792
2.4 - 3.8:1 16:9 = 2.1223 x SD 
- 0.0800 = 3.3519 x SD - 0.0792
2.9 - 4.6:1 4:3= 2.3371 x SD 
- 0.0800 = 3.6912 x SD - 0.0792
ET
-

DLE350 3.8 - 5.7:1
16:10 = 3.2550 x SD 
- 0.1351 = 4.9185 x SD - 0.1346
3.8 - 5.7:1 16:9 = 3.3455 x SD 
- 0.1351 = 5.0553 x SD - 0.1346
4.5 - 6.9:1 4:3= 3.6842 x SD 
- 0.1351 = 5.5671 x SD - 0.1346
ET
-

DLE450 5.6 - 9.0:1
16:10 = 4.9277 x SD 
- 0.3017 = 7.7903 x SD - 0.2991
5.6 - 9.0:1 16:9 = 5.0647 x SD 
- 0.3017 = 8.0069 x SD - 0.2991
6.8 - 10.8:1 4:3= 5.5775 x SD 
- 0.3017 = 8.8174 x SD - 0.2991
 rFixed-focus Lens (Model No.: ET- DLE055)
Projection lens Model No. Throw ratio Aspect ratio Projection distance (L) formula
ET
-
 DLE055 0.8:1
16:10 = 0.7237 x SD 
- 0.0476
0.8:1 16:9 = 0.7438 x SD 
- 0.0476
1.0:1 4:3 = 0.8191 x SD 
- 0.0476
 rFixed-focus Lens (Model No.: ET- DLE030)
Projection lens Model No. Throw ratio Aspect ratio Projection distance (L1) 
formula Formula for distance between 
projector and screen (A1)
ET
-

DLE030 0.40:1
16:10 = 0.3365 x SD + 0.0047 = 0.2597 x SD 
- 0.0740
0.40:1 16:9 = 0.3459 x SD + 0.0047 = 0.2942 x SD 
- 0.0740
0.48:1 4:3= 0.3809 x SD + 0.0047 = 0.2941 x SD 
- 0.0740
For PT-RX110
 rStandard zoom lens
Projection lens Model No. Throw ratio Aspect ratio Projection distance (L) formula
Min. (LW) Max. (LT)
― 1.8 - 2.5:1
16:9 = 1.5875 x SD 
- 0.0746 = 2.2167 x SD - 0.0725
1.8 - 2.5:1 4:3= 1.4571 x SD 
- 0.0746 = 2.0346 x SD - 0.0725  
						

							Chapter 2 Getting Started — Setting up
ENGLISH - 47
 rZoom Lens
Projection lens Model No. Throw ratio Aspect ratio Projection distance (L) formula
Min. (LW) Max. (LT)
ET
-

DLE085 0.8 - 1.0:1
16:9 = 0.7311 x SD 
- 0.0471 = 0.9051 x SD - 0.0442
0.8 - 1.0:1 4:3= 0.6711 x SD 
- 0.0471 = 0.8307 x SD - 0.0442
ET
-

DLE150 1.3 - 2.0:1
16:9 = 1.1991 x SD 
- 0.0540 = 1.7299 x SD - 0.0498
1.3 - 2.0:1 4:3= 1.1006 x SD 
- 0.0540 = 1.5878 x SD - 0.0498
ET
-

DLE250 2.4 - 3.8:1
16:9 = 2.0943 x SD 
- 0.0800 = 3.3078 x SD - 0.0792
2.4 - 3.7:1 4:3= 1.9224 x SD 
- 0.0800 = 3.0361 x SD - 0.0792
ET
-

DLE350 3.7 - 5.6:1
16:9 = 3.3015 x SD 
- 0.1351 = 4.9888 x SD - 0.1346
3.7 - 5.6:1 4:3= 3.0304 x SD 
- 0.1351 = 4.5791 x SD - 0.1346
ET
-

DLE450 5.6 - 8.9:1
16:9 = 4.9981 x SD 
- 0.3017 = 7.9015 x SD - 0.2991
5.5 - 8.9:1 4:3= 4.5876 x SD 
- 0.3017 = 7.2526 x SD - 0.2991
 rFixed-focus Lens (Model No.: ET- DLE055)
Projection lens Model No. Throw ratio Aspect ratio Projection distance (L) formula
ET
-
 DLE055 0.8:1
16:9 = 0.7340 x SD 
- 0.0476
0.8:1 4:3 = 0.6738 x SD 
- 0.0476
 rFixed-focus Lens (Model No.: ET- DLE030)
Projection lens Model No. Throw ratio Aspect ratio Projection distance (L1) 
formula Formula for distance between 
projector and screen (A1)
ET
-

DLE030 0.39:1
16:9 = 0.3413 x SD + 0.0047 = 0.2866 x SD 
- 0.0715
0.39:1 4:3= 0.3133 x SD + 0.0047 = 0.1881 x SD 
- 0.0715
Adjusting adjustable feet
Install the projector on a flat surface so that the front of the projector is parallel to the screen surface and the 
projection screen is rectangular.
If the screen is tilted downward, extend the front adjustable feet so that the projected image becomes rectangular . 
The adjustable feet can also be used to adjust the projector to be level when it is tilted in the horizontal direction.
Adjustable feet can be extended by turning them as shown in the figure.  Turning them in the opposite direction will 
return them to the original position.
Maximum adjustable range
Adjustable feet: 30 mm (1-3/16) each
Attention
 f Be careful not to block the intake/exhaust ports with your hands or any objects when adjusting the adjustable feet while the light source is 
on. (
x   page   27)  
						

							Chapter 2 Getting Started — Removing/attaching the projection lens
48 - ENGLISH
Removing/attaching the projection lens
Removing and attaching methods of the projection lens are same for both standard zoom lenses and optional 
lenses.
Move the lens position to the home position before replacing or removing the projection lens. (x
  page   70)
Attention
 f Replace the projection lens after turning of f the projector. fDo not touch the electric contacts of the projection lens. Dust or dirt may cause poor contact. fDo not touch the surface of the projection lens with your bare hands. fBefore attaching the projection lens, remove the lens cover attached to the projection lens. fPanasonic takes no responsibility for any damage or malfunction of the product resulting from the use of projection lenses which are not 
manufactured by Panasonic. 

Always use the standard zoom lens supplied with the projector or the specified projection lens.
Note
 fIn case of the ultra short focus zoom lens (Model No.: ET- DLE085), attachment/removal procedures of the Lens Mount Cover are dif ferent. 
Refer to the user manual supplied with ET- DLE085 for details.
 fIn case of the Fixed-focus Lens (Model No.: ET-

DLE030), precautions on handling the lens and attachment/removal procedures of the Lens 
Mount Cover are different. Refer to the Operating Instructions of ET
-

DLE030 for details.
Removing the projection lens
Remove the projection lens using the following procedure.
(ii)
(i)
(i) (ii)(iii)
Fig. 1 Lens Mount Cover
Projection lens
Lens release button Fig. 2
1) Turn the Lens Mount Cover counterclockwise and remove. (Fig. 1)
2)
 
While pressing the lens release button, turn the projection lens counterclockwise to the end and 
remove. (Fig. 2)
Attention
 f Store the removed projection lens where it will be free from vibration and impact.  
						

							Chapter 2 Getting Started — Removing/attaching the projection lens
ENGLISH - 49
Attaching the projection lens
Attach the projection lens using the following procedure.
(ii)(i)
Guide groove
Guide
Projection lens
Fig. 1 Fig. 2Fig. 3
Lens Mount Cover
1) Remove the Lens Mount Cover
, and align the projection lens guide to the guide groove of the 
projector and insert to the end. (Fig. 1)
2)
 
T
 urn the projection lens clockwise until it clicks. (Fig. 2)
3)
 
Attach the Lens Mount Cover
 . (Fig. 3)
 fAlign the Lens Mount Cover and the projector at the dashed line positions in the figure to attach, and turn 
the Lens Mount Cover clockwise to fix it to the projector

.
Attention
 f Turn the projection lens counterclockwise to confirm that it does not come out.  
						

							Chapter 2 Getting Started — Connecting
50 - ENGLISH
Connecting
Before connecting
 fBefore connecting, carefully read the operating instructions for the external device to be connected.
 fT

urn off the power of all devices before connecting cables.
 fT

ake note of the following points before connecting the cables. Failure to do so may result in malfunctions.
 g When connecting a cable to a device connected to the projector or the projector itself, touch any nearby 
metallic objects to eliminate static electricity from your body before performing work.
 gDo not use unnecessarily long cables to connect a device to the projector or to the projector body . 

The longer 
the cable, the more susceptible to noise it becomes. Since using a cable while it is wound makes it act like an 
antenna, it is more susceptible to noise.
 g When connecting cables, connect GND first, then insert the connecting terminal of the connecting device in a 
straight manner

.
 fAcquire any connection cable necessary to connect the external device to the system that is neither supplied 
with the device nor available as an option.
 fIf video signals from video equipment contain too much jitter

, the images on the screen may wobble. In this 
case, a time base corrector (TBC) must be connected.
 f If synchronization signals output from computers or video equipment are disrupted due to changes in the video 
output setting or other reasons, colors of projected images may be temporarily disrupted.
 fThe projector accepts video signals, 

Y/C signals, YC
BCR/YPBPR signals, analog RGB signals (synchronization 
signals are TTL level), and digital signals.
 f Some computer models cannot be connected to the projector

.
 f Use a cable compensator when you connect devices to the projector using long cables. Otherwise the projector 
may not project the image properly

.
 f For details of the types of video signals that can be used with the projector , refer to “List of compatible signals” 
(

x
 
page
 
200).
 terminal pin assignments and signal names
Outside view Pin No.Signal name Pin No.Signal name
(10)
(6) (11) (15)
(1) (5)
(1) R/PR(9) ―
(2) G/Y (10)GND
(3) B/P
B(11) GND
(4) ―(12)DDC data
(5) GND (13)SYNC/HD
(6) GND (14)VD
(7) GND (15)DDC clock
(8) GND
 terminal pin assignments and signal names
Outside view Pin No.Signal name Pin No.Signal name
Even-numbered pins of  (2) to (18)
(1)(19)
(2) (18)
Odd-numbered pins of 
(1) to (19)(1)
T.M.D.S data 2+ (11)T.M.D.S clock shield
(2) T.M.D.S data 2 shield (12)T.M.D.S clock
-
(3)T.M.D.S data 2-(13) CEC
(4) T.M.D.S data 1+ (14)―
(5) T.M.D.S data 1 shield (15)SCL
(6) T.M.D.S data 1
-(16) SDA
(7) T.M.D.S data 0+ (17)DDC/CEC
GND
(8) T.M.D.S data 0 shield (18)+5
  V
(9) T.M.D.S data 0
-(19)Hot plug detection
(10) T.M.D.S clock+