Home > Panasonic > Projector > Panasonic Pt D9610U Projector User Manual

Panasonic Pt D9610U Projector User Manual

Add to Favourites

Download as PDF Print this page Share this page

Have a look at the manual Panasonic Pt D9610U Projector User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 10737 Panasonic manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

Page 16 16
The figure below shows on-screen displays for any desired setting, starting with the MAIN MENU, and ending with
its sub-menu.
Normal screen
-&/4
-&/40$64

Page 17 17
The projection lenses and input modules which are available for use with this projector need to be purchased
separately and must be installed to the projector before the projector can be used.
• Obtain the required projection lenses and input modules beforehand in accordance with the projection
distance and the system used.
• When installing an optional input module, refer to page 28 for details.
Install a projection lens (sold separately) which is appropriate for the projector setting-up...

Page 18 18
Setting up the projector
Installing to the floor (Including the direct rear-mounting)
1. Installing drawing of the screen and the projector (unit : mm / inches)
L : Projection distance between the screen
and the center of the front foot of the
projector.
A: Distance between the center of the lens and
the top of the setting table (including the
height of a foot of the projector) , 288 mm –
313 mm (11.5- 12.5) (The height of each
foot is adjustable.)
C: Distance between the bottom of the foot and
the...

Page 19 Installing to the ceiling (Including direct rear-projection)
19
• Using the projector by installing to the ceiling requires an optional ceiling mount bracket (ET-PKD95).
For the projection distance (L), refer to the chapter Projection distance for each projection lens (sold separately)
on pages 20 - 24.
For the procedures to install the ceiling mount bracket on the projector and mount the suspension bolts on the
ceiling surface, refer to the installation instructions supplied with ET-PKD95.
L:...

Page 20 20
Projection distance for each projection lens
(sold separately)
L SH
Screen
The required projection distance depends on not only the target picture size but also the type of an optional
projection lens. Obtain the appropriate projection lens for the installation space by referring to the projection
distance for each projection lens shown in the table below and on the next page.
L : Projection distance
SH : Effective height of
screen
Projection distance measurements for PT-D9510U (screen aspect...

Page 21 21

...

Page 22 22
Projection distance measurements for PT-D9610U(screen aspect ratio: 16:9)
unit: mm (feet/inches)
NOTE:
• The projection distance listed in the table may have a variation within ± 5 %.
• Keystone (trapezoidal distortion) is compensated to be smaller than the screen size.
Projection distance measurements for PT-D9610U (screen aspect ratio: 5:4)
unit: mm (feet/inches)

...

Page 23 23
Calculation of the projection distance for each projection lens (for PT-D9610U)
If there is no reference made to the require picture size, calculate the projection distance using an expression
below after obtaining the diagonal measurement (inch) of the screen you will use.
Model No. of projection lens
Aspect ratio
4:3
16:9
16:94:3
4:3
16:9 ET-D95LE5
(1.5 – 2.0 : 1)
ET-D95LE6
(2.0 – 2.5 : 1)
ET-D95LE7
(2.5 – 4.0 : 1)
ET-D95LE9
(0.8 : 1)
Z o o m l e n s
Fixed
focal
lens
Methods of...

Page 24 24
Adjusting projector feet
[ Side view ]
[ Front view ]
Adjustable feet
The four feet on the bottom of the projector are adjustable for the height ( 0 mm / 0 to 25 mm / 1) and can be
used for its adjustment when the installation position is not level.
Model No. of projection lens
Aspect ratio
4:3
16:9
16:9
16:94:3
4:3
4:3
16:9 ET-D95LE1
(1.5 — 2.5 : 1)
ET-D95LE2
(2.5 — 4.0 : 1)
ET-D95LE3
(4.0 — 7.0 : 1)
ET-D95LE9
(0.8: 1)Zoom lens
Fixed
focal
lens
Min. : L = [(diagonal of screen(inches) + 12.87377) x...

Page 25 25
Setting the projection method
The projection method can be set in accordance with the way the projector has been installed. If the projected
picture is upside-down or back-to-front, change the projection method while referring to illustrations A to D below.
Set the projection method by displaying on-screen displays using the control buttons on the remote control unit or
the projector operating panel.
Setting procedure
Press the MENU button. ... The MENU screen will be displayed.
Press the UP( ) and...

Page 26 26
Adjusting the lens
Adjusting the focus
Adjustment procedure
Press the LENS button. ... The LENS screen will be displayed.
Use the control level buttons (+and −) to adjust the focus to the correct setting.
• Initial pressing of these buttons will allow fine adjustment. Pressing and holding
these buttons will allow the slow mode for the first six seconds and then the
fast mode.
Press the MENU button.
• The on-screen display will disappear and the screen will return to the normal
state.
Note: After the...

View all the pages

Add page 21 to Favourites

image text

							21

	


	


	


	


	


	


	


	


	


	


	


	

	


	


	


	


	


	


	


	


	


	


	


	

	


	


	


	


	


	


	


	


	


	


	


	

	


	


	


	


	


	


	


	


	


	


	


	

	


	


	


	


	


	


	


	


	


	


	


	

	


	


	


	


	


	


	


	


	


	


	


	

	


	


	


	


	


	


	


	


	


	


	


	

	


	


	


	


	


	


	


	


	


	


	


	

	


	


	


	


	


	


	


	


	


	


	


	

Picture
sizeScreen sizeProjection distance
Zoom lens
Effective
height(SH)Effective
width(SW)&5%-&¢£&5%-&

Add page 22 to Favourites

image text

							22
Projection distance measurements for PT-D9610U(screen aspect ratio: 16:9)
unit: mm (feet/inches)
NOTE:
• The projection distance listed in the table may have a variation within ± 5 %.
• Keystone (trapezoidal distortion) is compensated to be smaller than the screen size.
Projection distance measurements for PT-D9610U (screen aspect ratio: 5:4)                   
unit: mm (feet/inches)

	


	


	


	


	


	


	


	


	


	


	


	


	

	


	


	


	


	


	


	


	


	


	


	


	


	

	


	


	


	


	


	


	


	


	


	


	

	
	

	


	


	


	


	


	


	


	


	


	


	


	


	

	


	


	


	


	


	


	


	


	


	


	


	


	

	


	


	


	


	


	


	


	


	


	


	


	


	

	


	


	


	


	


	


	


	


	


	


	


	


	

	


	


	


	


	


	


	


	


	


	


	


	


	

	


	


	


	


	


	


	


	


	


	


	


	


	

Picture
sizeScreen sizeProjection distance
Zoom lens
Effective
height(SH)Effective 
width(SW)&5%-&¢£&5%-&¢£
&5%-&

Add page 23 to Favourites

image text

							23
Calculation of the projection distance for each projection lens (for PT-D9610U)
If there is no reference made to the require picture size, calculate the projection distance using an expression
below after obtaining the diagonal measurement (inch) of the screen you will use.
Model No. of projection lens
Aspect ratio
4:3
16:9
16:94:3
4:3
16:9 ET-D95LE5
(1.5 – 2.0 : 1)
ET-D95LE6
(2.0 – 2.5 : 1)
ET-D95LE7
(2.5 – 4.0 : 1)
ET-D95LE9
(0.8 : 1)
Z  o  o  m           l  e  n  s
Fixed
focal
lens
Methods of calculation of Projection distance (L)          Unit : inches 
L = 0.636 x diagonal of screen(inches) + 9.921
L = 0.659 x diagonal of screen(inches) + 9.921
ET-D95LE8
(4.0 – 7.0 : 1)
L = 0.736 x diagonal of screen(inches) + 9.921
4:3
4:3 16:9
16:95:4
5:4
5:4 5:4 5:4
Min.   : L = [(diagonal of screen(inches) x 3.488 + 5.079
Max.  : L = [(diagonal of screen(inches) x 6.11Min.   : L = [(diagonal of screen(inches) x 3.125 + 5.079
Max.  : L = [(diagonal of screen(inches) x 5.474Min.   : L = [(diagonal of screen(inches) x 3.2 + 5.079
Max.  : L = [(diagonal of screen(inches) x 5.606Min.   : L = [(diagonal of screen(inches) x 2.178 + 2.992
Max.  : L = [(diagonal of screen(inches) x 3.484 - 0.039 Min.   : L = [(diagonal of screen(inches) x 1.952 + 2.992
Max.  : L = [(diagonal of screen(inches) x 3.121 - 0.039 Min.   : L = [(diagonal of screen(inches) x 1.999 + 2.992
Max.  : L = [(diagonal of screen(inches) x 3.196 - 0.039 Min.   : L = [(diagonal of screen(inches) x 1.787+ 7.874
Max.  : L = [(diagonal of screen(inches) x 2.183 + 8.031Min.   : L = [(diagonal of screen(inches) x 1.601 + 7.874
Max.  : L = [(diagonal of screen(inches) x 1.956 + 8.031Min.   : L = [(diagonal of screen(inches) x 1.639 + 7.874
Max.  : L = [(diagonal of screen(inches) x 2.003 + 8.031 Min.   : L = [(diagonal of screen(inches) x 1.344 + 5.67
Max.  : L = [(diagonal of screen(inches) x 1.785 + 5.157 Min.   : L = [(diagonal of screen(inches) x 1.204 + 5.67
Max.  : L = [(diagonal of screen(inches) x 1.6 + 5.157 Min.   : L = [(diagonal of screen(inches) x 1.233 + 5.67
Max.  : L = [(diagonal of screen(inches) x 1.638 + 5.157
Model No. of projection lens
Aspect ratio
4:3
16:9
16:94:3
4:3
16:9 ET-D95LE5
(1.5 — 2.0 : 1)
ET-D95LE6
(2.0 — 2.5 : 1)
ET-D95LE7
(2.5 — 4.0 : 1)
ET-D95LE9
(0.8 : 1)
Z  o  o  m           l  e  n  s
Fixed
focal
lens
Methods of calculation of Projection distance (L)             Unit : mm 
L = 16.153 x diagonal of screen(inches) + 252
L = 16.751 x diagonal of screen(inches) + 252
ET-D95LE8
(4.0 — 7.0 : 1)
L = 18.684 x diagonal of screen(inches) + 252
4:3
4:3 16:9
16:95:4
5:4
5:4 5:4 5:4
Min.   : L = [(diagonal of screen(inches) x 88.587 + 129
Max.  : L = [(diagonal of screen(inches) x 155.19Min.   : L = [(diagonal of screen(inches) x 79.374 + 129
Max.  : L = [(diagonal of screen(inches) x 139.05Min.   : L = [(diagonal of screen(inches) x 81.279 + 129
Max.  : L = [(diagonal of screen(inches) x 142.387Min.   : L = [(diagonal of screen(inches) x 55.328 + 76
Max.  : L = [(diagonal of screen(inches) x 88.484 - 1 Min.   : L = [(diagonal of screen(inches) x 49.574 + 76
Max.  : L = [(diagonal of screen(inches) x 79.282 - 1 Min.   : L = [(diagonal of screen(inches) x 50.764 + 76
Max.  : L = [(diagonal of screen(inches) x 81.185 - 1 Min.   : L = [(diagonal of screen(inches) x 45.378 + 200
Max.  : L = [(diagonal of screen(inches) x 55.442 + 204Min.   : L = [(diagonal of screen(inches) x 40.659 + 200
Max.  : L = [(diagonal of screen(inches) x 49.676 + 204Min.   : L = [(diagonal of screen(inches) x 41.635 + 200
Max.  : L = [(diagonal of screen(inches) x 50.868 + 204 Min.   : L = [(diagonal of screen(inches) x 34.137 + 144
Max.  : L = [(diagonal of screen(inches) x 45.346 + 131 Min.   : L = [(diagonal of screen(inches) x 30.587 + 144
Max.  : L = [(diagonal of screen(inches) x 40.63 + 131 Min.   : L = [(diagonal of screen(inches) x 31.321 + 144
Max.  : L = [(diagonal of screen(inches) x 41.605 + 131

Add page 24 to Favourites

image text

							24
Adjusting projector feet
[ Side view ]
[ Front view ]
Adjustable feet
The four feet on the bottom of the projector are adjustable for the height ( 0 mm / 0 to 25 mm / 1) and can be
used for its adjustment when the installation position is not level.
Model No. of projection lens
Aspect ratio
4:3
16:9
16:9
16:94:3
4:3
4:3
16:9 ET-D95LE1
(1.5 — 2.5 : 1)
ET-D95LE2
(2.5 — 4.0 : 1)
ET-D95LE3
(4.0 — 7.0 : 1)
ET-D95LE9
(0.8: 1)Zoom lens
Fixed
focal
lens
Min.  : L = [(diagonal of screen(inches) + 12.87377) x 1000/32.82965]-177
Max. : L = [(diagonal of screen(inches) + 6.79329) x 1000/19.87243]-177
Min.  : L = [(diagonal of screen(inches)/0.9179 + 12.87377)x1000/32.82965-177
Max. : L = [(diagonal of screen(inches)/0.9179 + 6.79329)x1000/19.87243]-177
Min.  : L = [(diagonal of screen(inches) + 7.995693) x 1000/19.87243]-177
Max. : L = [(diagonal of screen(inches) + 4.208911) x 1000/12.40818]-177
Min.  : L = [(diagonal of screen(inches) + 3.08921) x 1000/12.31233]-177
Max. : L = [(diagonal of screen(inches) + 1.052912) x 1000/7.057261]-177 Min.  : L = [(diagonal of screen(inches)/0.9179 + 7.995693)x1000/19.82683]-177
Max. : L = [(diagonal of screen(inches)/0.9179 + 4.208911)x1000/12.40818]-177
Min.  : L = [(diagonal of screen(inches)/0.9179 + 3.08921)x1000/12.31233]-177
Max. : L = [(diagonal of screen(inches)/0.9179 + 1.052912)x1000/7.057261]-177 Methods of calculation of Projection distance (L)             Unit : mm 
L = 21.457 x diagonal of screen(inches) + 252
L = 23.371 x diagonal of screen(inches) + 252
Calculation of the projection distance for each projection lens (for PT-D9510U)
If there is no reference made to the require picture size, calculate the projection distance using an expression
below after obtaining the diagonal measurement (inch) of the screen you will use.
Model No. of projection lens
Aspect ratio
4:3
16:9
16:9
16:94:3
4:3
4:3
16:9 ET-D95LE1
(1.5 — 2.5 : 1)
ET-D95LE2
(2.5 — 4.0 : 1)
ET-D95LE3
(4.0 — 7.0 : 1)
ET-D95LE9
(0.8 : 1)Zoom lens
Fixed
focal
lens
Min.  : L = [(diagonal of screen(inches) + 12.87377) x 1.2] - 6.97
Max. : L = [(diagonal of screen(inches) + 6.79329) x 1.98] - 6.97
Min.  : L = [(diagonal of screen(inches) / 0.9179 + 12.87377) x 1.2] - 6.97
Max. : L = [(diagonal of screen(inches) / 0.9179 + 6.79329) x 1.98] - 6.97
Min.  : L = [(diagonal of screen(inches) + 7.995693) x 1.96] - 6.97
Max. : L = [(diagonal of screen(inches) + 4.208911) x 3.17]- 6.97
Min.  : L = [(diagonal of screen(inches) + 3.08921) x 3.2] - 6.97
Max. : L = [(diagonal of screen(inches) + 1.052912 x 5.58] - 6.97 Min.  : L = [(diagonal of screen(inches) / 0.9179 + 7.995693) x 1.96] - 6.97
Max. : L = [(diagonal of screen(inches) / 0.9179 + 4.208911) x 3.17] - 6.97
Min.  : L = [(diagonal of screen(inches) / 0.9179 + 3.08921) x 3.2] - 6.97
Max. : L = [(diagonal of screen(inches) / 0.9179 + 1.052912) x 5.58] - 6.97Methods of calculation of Projection distance (L)          Unit : inches 
L = 0.845 x diagonal of screen(inches) + 9.921
L = 0.920 x diagonal of screen(inches) + 9.921

Add page 25 to Favourites

image text

							25
Setting the projection method
The projection method can be set in accordance with the way the projector has been installed. If the projected
picture is upside-down or back-to-front, change the projection method while referring to illustrations A to D below.
Set  the projection method by displaying on-screen displays using the control buttons on the remote control unit or 
the projector operating panel.
Setting procedure
Press the MENU button. ... The MENU screen will be displayed.
Press the UP( ) and DOWN ( )arrow buttons to select OPTION.
• The text color of a selected item will change.
Press the ENTER button. ... The OPTION screen will be displayed.
Press the UP( ) and DOWN ( ) arrow buttons to select SETTING.
Press the LEFT ( ) and RIGHT ( )arrow buttons to select the projection method.
• The display and the projection method will change as shown below each time the
LEFT ( ) or RIGHT ( ) arrow button is pressed.
Press the MENU button twice. 
• The on-screen display will disappear and the screen will return to the normal
state. .&/6
650 4&561
-&/4
1*$563&
104*5*0/
015*0/
4*(/- -*45
5&45 155&3/
.&/6 
46#.&/6  &/5&3
&9*5  .&/6
015*0/
*% OO
4&55*/(

Add page 26 to Favourites

image text

							26
Adjusting the lens
Adjusting the focus
Adjustment procedure
Press the LENS button. ... The LENS screen will be displayed.
Use the control level buttons (+and −) to adjust the focus to the correct setting.
• Initial pressing of these buttons will allow fine adjustment. Pressing and holding
these buttons will allow the slow mode for the first six seconds and then the
fast mode. 
Press the MENU button. 
• The on-screen display will disappear and the screen will return to the normal
state.
Note: After the zoom adjustment of a zoom lens(sold separately), adjust the focus.
Adjusting the lens position (optical shift)
Adjustment procedure
Press the LENS button. ... The LENS screen will be displayed.
Use the (UP, DOWN, LEFT and RIGHT (
, , and )  buttons to adjust the
lens position so that the centre of the picture is in the centre of the screen.
• Initial pressing of these buttons will allow fine adjustment. Pressing and holding
these buttons will allow the slow mode for the first six seconds and then the
fast mode.
Press the MENU button to return the screen to the normal state. 
• The following procedure can also be used in lens adjustment mode.
Press the MENU button. ... The MENU screen will be displayed.
Press the UP( ) and DOWN ( )arrow buttons to select LENS.
Press the ENTER button. ... The LENS screen will be displayed.
• After the display of the LENS screen, follow the above procedure. 
• For details on the adjustment range after lens positioning, refer to the next page.
Caution!
• Do not reach for the openings beside the optical lens, during horizontal or vertical movements of the lens
there is a injury hazard.
.&/6
650 4&561
-&/4
1*$563&
104*5*0/
015*0/
4*(/--*45
5&45 155&3/
.&/6 
46#.&/6  &/5&3
&9*5  .&/6
-&/4
-&/40$64

Add page 27 to Favourites

image text

							27
Adjustment range after lens positioning is as follows:
ÞThe numbers in brackets are the dimensions when the ET-D95LE9 lens is being used.
Adjustment range after lens position (optical shift)
(0.24H)
0.35H(0.24H)
0.35H
(0.38V)
0.5V
(0.38V)
0.5V
(0.24H)
0.35H(0.24H)
0.35H
(0.38V)
0.50V
0.31V
(0.38V)
(0.24H)
0.29H
0.31H 0.31H
0.50V
0.50V0.28V
0.22H
(0.24H)
0.29H
(0.31V)
0.38V (0.38V)
0.50V
0.31H0.31H
0.50V
0.22H
0.28V 0.50V
Standard
projection
position
Projected
screen height,V
Projected screen width,HProjected screen width,H
Standard
projection
position
Projected
screen height,V Projected
screen height,V
Projected screen width,H
Projected
screen height,V
Standard
projection
position Standard
projection
position
Projected screen width,H
Floor projection for PT-D9510U
Ceiling projection for PT-D9510U
Floor projection for PT-D9610U
Ceiling projection for PT-D9610U

Add page 28 to Favourites

image text

							28
Obtain the required input modules (sold separately) beforehand in accordance with the system input signal.
• Types of input module (sold separately)
• Input slot numbers
• The signal sources connected to the input modules can each be selected by specifying the respective
slot number using the input select buttons on the remote control unit or the projector operating panel.
For details on selecting the input source refer to page 40.
• Modules other than the optional specified ones cannot be inserted into the slots 1, 2, and 3. 
Installing the input module


Input signal




Serial digital signal
Serial digital signal
HD Serial digital signal
SVGA,XGA,SXGA signals

Module No.
ET-MD95RGB
ET-MD95VM2
ET-MD95SD1
ET-MD95SD2
ET-MD95SD3
ET-MD95T
                     Input signal level
Video/Sync. signal input impedance : 75 Ω/1 kΩ
R/P
RCr, B/PBCb : 0.7 V [p-p] or 1.0 V [p-p] with 
  BETACAM input
G/Y 0.7 V [p-p]
(1.0 V [p-p]when SYNC ON G/Y signal is input)
Composite sync/Separate sync : 0.6 V [p-p]-4.0 V [p-p] 
    with 75 Ω, TTL level with 1 kΩ 

    Analog RGB input signal
      f
H: 15 kHz—100 kHz, fV: 24 Hz—120 Hz, 
                          dot clock frequency: 20 MHz—162 MHz 
   Color difference input signal
          Applicable formats: 480i, 576i, 480p, 720/60p,
      1080/60i(1035/60i)1080/50i, 1080/30p, 
       1080/25p, 1080/24p, 1080/24sF
Video / Y :1.0 V [p-p],  C : 0.286 V [p-p]
Cr / C
b :    0.7 V [p-p],   Impedance  :    75 Ω
Conforming to SMPTE259M
Conforming to SMPTE259M/SMPTE294M
Conforming to SMPTE292M
Conforming to TMDS 
Video signalRGB/YP
bPr/YCbCr
signal
Slot 1
Slot 2
Slot 3
The bays (slots) in which the input modules are inserted
are numbered 1, 2 and 3 in order starting from the top,
as shown in the illustration at left.
The slots can be used in any order, and the same type
of input module can be inserted into more than one slot
at the same time. In addition, the projector will
automatically detect which input module has been
inserted into which slot.
It is necessary to select VIDEO or Y/C input and adjust
the input signal after the input module has been
inserted.
NOTE

Add page 29 to Favourites

image text

							29
Disconnect the power supply from the projector before installing any of the input modules.
Installation procedure
Remove the two screws which are holding the slot cover where the input module is to be installed, and then
remove the slot cover.
Fit the input module into the slot rails, and then push the input module in until it is seated in the connector, while
being careful not to bump any of the module components.
Tighten the two screws to secure module in place.
Remove the slot cover
Slot coverRemove the
    two screws
Insert the input module
Input moduley
Slot
Secure the input module
Register input signal

Tighten the two screws
With this equipment, it is necessary 
to store the input signal after 
installing the input module. (Refer to 
pages 42 and 43 for details on 
registering input signals.)
  •
Installing the input modules
• Up to three input modules can be installed.
• Do not remove any of the covers on spare slots
where no input module has been installed.
• Be sure to install input modules in the slot 1, 
slot 2 and slot 3 positions.NOTE

Add page 30 to Favourites

image text

							30
Connecting the input module signal source
When setting up the projector, you will need to connect the signal source to an input module according to the type
of signal being input.
RGB signal input module
 ET-MD95RGB
VGA to BNC
adapter cable
RGB signal
Component 
signal
Video signal input module
 ET-MD95VM2
Serial digital input module

ET-MD95SD1
TMDS input module
ET-MD95T Component 
signal
SD signal
TMDS signalProjector
Personal computer High-definition VCR
DVD player
VCR (with built-in TBC)
Multi laser disc player
Commercial-type digital 
VCR Personal computer
HD-Serial digital input module
ET-MD95SD3 Serial digital input module

ET-MD95SD2
HD-SD signalSD signal

All Panasonic manuals Comments (0)

Related Manuals for Panasonic Pt D9610U Projector User Manual