Home > Ricoh > All in One Printer > Ricoh Mp C4500 Instruction Manual

Ricoh Mp C4500 Instruction Manual

Here you can view all the pages of manual Ricoh Mp C4500 Instruction Manual. The Ricoh manuals for All in One Printer are available online for free. You can easily download all the documents as PDF.

Page 51

Network Settings
41
1
❖[Network] → [LAN Type] → [Ethernet]
 Web Image Monitor: Can be used for specifying the setting.
 SmartDeviceMonitor for Admin: Cannot be used for specifying the setting.
 telnet: Can be used for specifying the setting.
❖[Network] → [LAN Type] → [IEEE 802.11b]
 Web Image Monitor: Can be used for specifying the setting.
 SmartDeviceMonitor for Admin: Cannot be used for specifying the setting.
 telnet: Can be used for specifying the setting.
❖[Network] → [Host Name]
 Web Image...

Page 52

Connecting the Machine
42
1
❖[IEEE 1394] → [IPv4 over 1394]
 Web Image Monitor: Can be used for specifying the setting.
 SmartDeviceMonitor for Admin: Cannot be used for specifying the setting.
 telnet: Can be used for specifying the setting.
❖[IEEE 1394] → [WINS Configuration] → [On] → [Primary WINS Server]
 Web Image Monitor: Can be used for specifying the setting.
 SmartDeviceMonitor for Admin: Cannot be used for specifying the setting.
 telnet: Can be used for specifying the setting.
❖[IEEE...

Page 53

Network Settings
43
1
❖[IEEE 802.11b] → [Channel]
 Web Image Monitor: Can be used for specifying the setting.
 SmartDeviceMonitor for Admin: Cannot be used for specifying the setting.
 telnet: Can be used for specifying the setting.
❖[IEEE 802.11b] → [Security Method]
 Web Image Monitor: Can be used for specifying the setting.
 SmartDeviceMonitor for Admin: Cannot be used for specifying the setting.
 telnet: Can be used for specifying the setting.
❖[IEEE 802.11b] → [Transmission Speed]
 Web Image...

Page 54

Connecting the Machine
44
1
❖[File Transfer] → [Administrators E-mail Address]
 Web Image Monitor: Can be used for specifying the setting.
 SmartDeviceMonitor for Admin: Cannot be used for specifying the setting.
 telnet: Cannot be used for specifying the setting.
❖[File Transfer] → [E-mail Communication Port]
 Web Image Monitor: Can be used for specifying the setting.
 SmartDeviceMonitor for Admin: Cannot be used for specifying the setting.
 telnet: Cannot be used for specifying the setting....

Page 55

Network Settings
45
1
❖[File Transfer] → [Number of Scanner Resends]
 Web Image Monitor: Cannot be used for specifying the setting.
 SmartDeviceMonitor for Admin: Cannot be used for specifying the setting.
 telnet: Cannot be used for specifying the setting. 

Page 56

Connecting the Machine
46
1Connecting the Machine to a Telephone 
Line and TelephoneThis section describes how to connect the machine to the telephone lines and se-
lect the line type.
Connecting the Telephone Line
To connect the machine to a telephone line, use a snap-in modular type connector.
Important
❒Make sure the connector is the correct type before you start.
1.External telephone connector
2.G3 interface unit connector
3.Extra G3 interface unit connector
Selecting the Line Type
Select the line...

Page 57

47
2. System Settings
This chapter describes user tools in the System Settings menu. For details on
how to access System Settings, see Accessing User tools (System Settings).
General Features
This section describes the user tools in the General Features menu under System
Settings.
Default settings are shown in bold type.
❖Program / Change / Delete User Text
You can register text phrases you often use when specifying settings, such as
.com and Regards.
You can register up to 40 entries.
Program / Change:...

Page 58

System Settings
48
2
❖Warm-Up Beeper (copier/Document Server)
You can have the beeper sound when the machine becomes ready to copy af-
ter leaving Energy Saver mode, or when the power is turned on.
On
Off
❖Copy Count Display (copier/Document Server)
The copy counter can be set to show the number of copies made (count up) or
the number of copies yet to be made (count down).
Up
 Down
❖Function Priority
Specify the mode to be displayed immediately after the operation switch is
turned on, or when System...

Page 59

General Features
49
2
❖Output: Copier (copier)
Specify a tray to which documents are delivered.
1. Finisher Upper Tray
2. Finisher Shift Tray
3. Finisher Upper Tray
4. Finisher Shift Tray
5. Finisher Upper Tray
6. Finisher Shift Tray
7. Finisher Booklet Tray
8. Internal Tray 1
9. Internal Tray 2
❖Output: Document Server (Document Server)
Specify a tray to which documents are delivered.
Internal Tray 1
 Internal Tray 2
 Finisher Upper Tray
 Finisher Shift Tray
❖Output: Facsimile (facsimile)
Specify a...

Page 60

System Settings
50
2
❖Output: Printer (printer)
Specify a tray to which documents are delivered.
The output trays set on the printer driver have priority over the output tray
specified below.
Internal Tray 1
 Internal Tray 2
 Finisher Upper Tray
 Finisher Shift Tray
❖System Status/Job List Display Time
Specify how long to display the System Status and Job List display for.
On: 60 second(s)
Off
By selecting [On], you can specify a display time between 10 and 999 seconds.
❖Key Repeat
You can enable...
Start reading Ricoh Mp C4500 Instruction Manual

Related Manuals for Ricoh Mp C4500 Instruction Manual

All Ricoh manuals