Samsung 6400, 6500 Led Tv User Manual

							31English
04Advanced	FeaturesNetwork	Setup	(Manual)
I\f the other method\ys do not work, you \yneed to enter the 
Network setting va\ylues manually\b
Gettin\b	the	Network	Connection	Values
To get the Network \yconnection values \yon most Windows 
computers, \follow t\yhese steps:
1.	Right click the Ne\ytwork icon on the \ybottom right o\f the\y 
screen\b
2.	 In the pop-up menu\y, click Status\b
3.	 On the dialog that \yappears, click the\y Support tab\b
4.	 On the Support tab,\y click the Details\y button\b The 
Network settings a\yre displayed\b
How	to	set	up	manually
To enter the Networ\yk connection value\ys manually, \follow \y
these steps:
1.	 Follow Steps 1 through 6 in the “How\y to set up using 
PBC (WPS)” (p\b 29)\b
2.	 Press the ▼ button to select \yInternet	Protocol	Setup, 
and then press the ENTER
E button\b Press the ▲ 
or ▼ button to select \yManual, and then press the 
ENTER
E button\b
3.	 Press the ▼ button to go to t\yhe first entry field \y(IP 
Address)\b
4.	 Use the number but\ytons to enter numb\yers\b
5.	 When done with each\y field, use the ► button to move 
successively to the\y next field\b You can also use th\ye other 
arrow buttons to move\y up, down, and back\y\b
6.	 Enter the IP	Address, Subnet	Mask, and Gateway 
values\b
7.	 Press the ▲ or ▼ button to go to DNS\b
8.	 Press the ▼ button to go to t\yhe first DNS entry fi\yeld\b 
Enter the numbers a\ys above\b
9.	 When done, press the ▲ button to go to Select	a	
Network\b Select your networ\yk, and then press the 
ENTER
E button\b
10.	 Go to Step 4 in the\y “How to set up au\ytomatically” (p\b 
29), and \follow the\y directions \from that point on\b
SW\f(Samsun\b	Wireless	\fink)
This \function lets \yyou connect a Samsu\yng device that 
supports the PBC (\yWPS) to your TV\b You can connect 
devices to the TV e\yven i\f a sharer is not connecte\yd to the TV\b
 
✎To use the Internet@T V, the AP (access point) must be 
connected to the wireless network\b
 
✎I\f a Samsung Wireless Lan Adapter is connected to the 
USB	2 port, the network may not operate normally\b We 
recommend to connecting it to the USB	1	(HDD) port\b
 
✎Only sharers using the 2\b4 Ghz band are supported\b 
Sharers using the 5 Ghz band are not supported\b
SW\f	connect
You can directly connect a dev\yice that supports \ythe PBC 
(WPS) to the TV\b
 
✎This \function is available when SW\f(Samsun\b	
Wireless	\fink) is set to On \b
How	to	connect	Samsun\b	Wireless	\fink
For the procedures to establish a \yconnection, re\fer to the 
\following:
1.	 Follow Steps 1 through 5 in the “How\y to set up using 
PBC (WPS)” (p\b 29)\b
2.	 Select SW\f(Samsun\b	Wireless	\fink) by using the ▼ 
button and press the ENTER
E button to turn it On\b
3.	 Select SW\f	connect by using the ▼ button and press 
the ENTER
E button\b
4.	 I\f the “Press	the	PBC	button	on	the	device	which	
supports	PBC	button	to	connect	within	120	
seconds” message appears,\y press the PBC button\y on 
the device to conne\yct\b
 
✎For more in\formation, re\fer to the wireless network 
setup manual o\f the device to be connected\b 
5.	 I\f the device is co\ynnected properly to the TV a\f\yter 
starting count on \ymessage box then m\yessage box will 
be disappeared automatically\b
 
✎I\f the connection \fails, please retry a\fter 2 minutes\b
If	Your	TV	Fails	to	Connect	to	the	Internet
Your TV may not be a\yble to connect to \ythe Internet 
because your ISP ha\ys permanently registered the 
MAC address (a unique ident\yi\fying number) o\f yo\yur 
PC or modem, which \yit then authentica\ytes each time 
you connect to the \yInternet as a way o\f preventing 
unauthorized access\y\b As your TV has a \ydi\f\ferent MAC 
address, your ISP can n\yot authenticate it\ys MAC address, 
and your TV can not\y connect\b
To resolve this problem, ask your ISP\y about the 
procedures required to connect devic\yes other than a PC\y 
(such as your TV) t\yo the Internet\b
I\f your Internet service provider requires an ID or passwo\yrd 
to connect to the \yInternet, your TV may no\yt be able to 
connect to the Int\yernet\b I\f this is the\y case, you must ent\yer 
your ID or password when connecting t\yo the Internet\b
The internet connection may \y\fail because o\f a fi\yrewall 
problem\b I\f this is t\yhe case, contact yo\yur Internet service 
provider\b 
I\f you cannot conne\yct to the Internet even a\fter you \yhave 
\followed the procedures o\f your Internet service provider, 
please contact Samsung Electronics at 1-800-SAMSUNG\b
[UC6400-6500-USA]BN68-02711D-01Eng.indb   312010-02-12   오전 10:15:31 
						

							32 English 
 Ad\fanced Features 
  Media Play  
	
¦ 		Connectin\b	a	USB	Dev\Gice		
		1.	 Turn on your TV\b 
	2.	 Connect a USB devic\ye containing photo\y, music and/or movi\ye fi les to the   USB	1	
(HDD)  or   USB	2  jack on the side o\y\f the TV\b 
	3.	 When USB is connect\yed to the TV, popup window appe\yars\b Then you can s\yelect 
  Media	Play \b  
	
¦ 		Connectin\b	to	your	\GPC	throu\bh	a	network		
  You can play pictures, music and video\ys saved on your PC \ythrough a network con\ynection in the   Media	Play  mode\b   
 
✎  I\f you want to use   Media	Play  to play \files saved on your PC over your T V, you should download “PC Share Manager” 
and users manual \from “www\bsamsung\bcom\b”  
		1.	 For more in\formation on ho\yw to confi gure your network, re\fer to “Network Co\ynnection” (p\b 26)\b \y 
 
–   You are recommended to locat\ye both the TV and t\yhe PC in same subn\yet\b The fi rst 3 parts o\f the \ysubnet address o\f the 
TV and the PC IP ad\ydresses should be the\y same and only the \ylast part (the hos\yt address) should be chan\yged\b (e\bg\b IP 
Address: 123\b456\b789\b**)\y  
		2.	 Using a LAN cable,\y connect between t\yhe external modem and the P\yC onto which the Sa\ymsung PC Share Manager 
Program will be inst\yalled\b  
 
–   You can connect the\y TV to the PC directly without conne\ycting it through a Sharer (Router)\b  
  TV Rear Panel  
  or  
  USB Drive  
  LAN Cable  
  (Not Supplied)  
  PC  
  External Modem 
 (ADSL/VDSL/Cable TV\y)  
  LAN  
  Samsung Wireless   LAN 
Adapter  
  Wireless IP sharer     TV Rear Panel  
  or  
MEDIA.P  Enjoy photos, music \yand/or movie fi les saved on 
a USB Mass Storage \yClass (MSC) device\b \y 
 
O    MENU  m    →    Application    →   Content	
View    →   Media	Play    →   ENTER  E   
SUM   Change Device  
   View Devices      E   Enter      R   Return  
  MediaPlay  
  Videos  
[UC6400-6500-USA]BN68-02711D-01Eng.indb   322010-02-12   오전 10:15:33 
						

							33English
04Advanced	Features 
✎Functions that are not supported when connecting to a PC through a network:
 
xThe Back\bround	Music and Back\bround	Music	Settin\b \functions\b
 
xSorting \files by pre\ference in the Photos , Music, and Videos \folders\b
 
xThe � (REW) or µ (FF) button while a movie is playing\b
 
✎The Divx DRM, Multi-audio, embedded caption is not supported\b
 
✎Samsung PC Share manager should be permitted by the \firewall program on your PC\b
 
✎When you use Media	Play mode through a network connection, depending on the \functions o\f the provided server:
 
xThe sorting method may vary\b
 
xThe scene search \function may not be supported\b
 
xThe Play	Continuously \function, which resumes playing o\f a video, may not be supported\b
 
– The Play	Continuously \function does not \ysupport multiple u\ysers\b (It will have\y only memorized the\y point where the 
most recent user stopped \yplaying\b)
 
xThe ◄ or ► buttons may not work depending on the content in\formation\b
 
xI\f you experience any \file stuttering issue while playing a video over a wireless network, we recommend using a wired 
network\b
 
✎It might not work properly with unlicensed multimedia \files\b
 
✎Need-to-Know List be\fore using Media	Play
 
xMTP (Media Trans\fer Protocol) is not supported\b
 
xThe \file system supports FAT16, FAT32 and NTFS\b
 
xCertain types o\f USB Digital camera and audio devices may not be compatible with this T V\b
 
xMedia Play only supports USB Mass Storage Class (MSC) devices\b MSC is a Mass Storage Class Bulk-Only 
Transport device\b Examples o\f MSC are Thumb drives, Flash Card Readers and USB HDD (USB HUB are not 
supported)\b Devices should be connected directly to the T V’s USB port\b 
 
xBe\fore connecting your device to the T V, please back up your \files to prevent them \from damage or loss o\f data\b 
SAMSUNG is not responsible \for any data \file damage or data loss\b
 
xConnect a USB HDD to the dedicated port, USB	1	(HDD) port\b
 
xDo not disconnect the USB device while it is loading\b
 
xThe higher the resolution o\f the image, the longer it takes to display on the screen\b
 
xThe maximum supported JPEG resolution is 15360X8640 pixels\b
 
xFor unsupported or corrupted \files, the “Not Supported File Format” message is displayed\b
 
xI\f the \files are sorted by Basic View, up to 1000 \files can be displayed in each \folder\b
 
xMP3 \files with DRM that have been downloaded \from a non-\free site cannot be played\b Digital Rights Management 
(DRM) is a technology that supports the creation, distribution and management o\f the content in an integrated and 
comprehensive way, including the protection o\f the rights and interests o\f the content providers, the prevention o\f the 
illegal copying o\f contents, as well as managing billings and settlements\b
 
xI\f more than 2 PTP devices are connected, you can only use one at a time\b
 
xI\f more than two MSC devices are connected, some o\f them may not be recognized\b A USB device that requires high 
power (more than 500mA or 5V) may not be supported\b
 
xI\f an over-power warning message is displayed while you are connecting or using a USB device, the device may not 
be recognized or may mal\function\b
 
xI\f the T V has been no input during time set in Auto	Protection	Time , the Screensaver will run\b
 
xThe power-saving mode o\f some external hard disk drives may be released automatically when connected to the T V\b
 
xI\f a USB extension cable is used, the USB device may not be recognized or the \files on the device may not be read\b
 
xI\f a USB device connected to the T V is not recognized, the list o\f \files on the device is corrupted or a \file in the list is 
not played, connect the USB device to the PC, \format the device and check the connection\b
 
xI\f a \file deleted \from the PC is still \found when Media Play is run, use the “Empty the Recycle Bin” \function on the PC 
to permanently delete the \file\b
[UC6400-6500-USA]BN68-02711D-01Eng.indb   332010-02-12   오전 10:15:34 
						

							34English
Ad\fanced Features
	
¦ Screen	Display
Move to the desired file using the up\y/down/right/le\ft bu\yttons and then press the ENTERE or � (Play) button\b The\y file is 
played\b 
 
✎Supports the View	Devices and Home in Media	Play homepage\b
 
Videos
Playin\b	Video
1.	 Press the ◄ or ► button to select \yVideos, then press the ENTER
E button in the Media	Play menu\b
2.	 Press the ◄/►/▲/▼ button to select \ythe desired video in the file\y list\b
3.	 Press the ENTER
E button or � (Play) button\b
 
– The selected file is\y displayed on the to\yp with its playing \ytime\b
 
– I\f video time in\form\yation is unknown, \yplay time and progress bar are not displayed\b
 
– During video playba\yck, you can search using the ◄ and ► button\b
 
✎In this mode, you can enjoy movie clips contained on a Game, 
but you cannot play the Game itsel\f\b 
 
y Supported Subtitle F\yormats
Name File	extension Format
MPEG-4 time-based te\yxt \bttxtXML
SAMI \bsmiHTML
SubRip \bsrtstring-based
SubViewer \bsubstring-based
Micro DVD \bsub or \btxtstring-based
In\formation:
You can ascertain the selected 
file name and the number o\f files  and page\b
Sort List Section:
Displays the sorting standard\b
 
✎The sorting standard is 
di\f\ferent depending on the 
contents\b
Operation Buttons
 Red (Chan\be 	Device ): Selects a connected device\b Green ( Preference ): Sets the file pre\ference\b (not supported in Basic view) Yellow (Select): Selects multiple files \from file list\b Selected files are marked with a symbol\b Blue (Sortin\b ): Selects the sort list\bT Tools : Displays the option menu\b
 
✎Using the � (REW) or µ (FF) button, file list can move to next or previous page\b File List Section:
You can confirm the files and 
groups that are sorted by 
category\b
Jan.10.2010
Jan.10.2010
Jan.10.2010
Jan.10.2010
Jan.10.2010
Jan.10.2010
Jan.10.2010
Jan.10.2010
Jan.10.2010
Jan.10.2010
/Movie 01.avi
1/1
Movie 01.avi
SUM Movie 03.avi
Movie 05.avi
Movie 07.avi
Movie 0\f.avi
Movie 02.avi
Movie 04.avi
Movie 06.avi
Movie 08.avi
Movie 10.avi
 Select     Sorting    T Tools
Videos
  Change Device Page
Movie 01.avi
00:04:03 / 00:07:3\
8
1/1
SUME Pause  L Jump  T Tools  R Return
[UC6400-6500-USA]BN68-02711D-01Eng.indb   342010-02-12   오전 10:15:35 
						

							35English
04Advanced	Features 
y Supported Video Formats
File	Extension Container Video	Codec ResolutionFrame	rate	
(fps) Bit	rate	
(Mbsp) Audio	Codec
*\bavi
*\bmkv AVI 
MKV Divx 3\b11 / 4\bx / 5\y\b1 / 6\b0
1920x10806 ~ 308
MP3 / AC3 / LPCM /\y ADPCM / DTS Core
XviD
1920x10806 ~ 308
H\b264 BP / MP / HP 1920x10806 ~ 3025
MPEG4 SP / ASP 1920x10806 ~ 308
Motion JPEG 800x6006 ~ 30 8
*\bas\f ASFDivx 3\b11 / 4\bx / 5\y\b1 / 6\b0
1920x10806 ~ 308
MP3 / AC3 / LPCM /\y ADPCM / WMA
XviD
1920x10806 ~ 308
H\b264 BP / MP / HP 1920x10806 ~ 3025
MPEG4 SP / ASP 1920x10806 ~ 308
Motion JPEG 800x6006 ~ 30 8
*\bwmv ASFWindow Media Video v9 1920x10806 ~ 3025 WMA
*\bmp4 MP4 H\b264 BP / MP / HP
1920x10806 ~ 3025
 MP3 / ADPCM / AAC\y
MPEG4 SP / ASP 1920x10806 ~ 308
XVID 1920x10806 ~ 308
*\b3gp 3GPP H\b264 BP / MP / HP
1920x10806 ~ 3025
ADPCM / AAC / HE-AA\yC
MPEG4 SP / ASP 1920x10806 ~ 308
*\bvro VRO 
VOB MPEG1 
1920x108024 / 25 / 30 30
AC3 / MPEG / LPCM
MPEG2 1920x108024 / 25 / 30 30
*\bmpg
*\bmpeg PS MPEG1
1920x108024 / 25 / 30 30
AC3 / MPEG / LPCM /\y AAC
MPEG2 1920x108024 / 25 / 30 30
H\b264 1920x10806 ~ 3025
*\bts
*\btp
*\btrp TS MPEG2
1920x108024 / 25 / 30 30
AC3 / AAC / MP3 / \yDD+ / 
HE-AAC
H\b264
1920x10806 ~ 3025
VC1 1920x10806 ~ 3025
Other	Restrictions
 
✎NOTE
 
xI\f there are problems with the contents o\f a codec, the codec will not be supported\b
 
xI\f the in\formation \for a Container is incorrect and the \file is in error, the Container will not be able to play 
correctly\b
 
xSound or video may not work i\f the contents have a standard bitrate/\frame rate above the compatible Frame/sec 
listed in the table above\b
 
xI\f the Index Table is in error, the Seek (Jump) \function is not supported\b
Video	Decoder Audio	Decoder
•   Supports up to H\b264, Level 4\b1
•   H\b264 FMO / ASO / RS, VC1 SP / MP / AP L4 and AVCHD are not 
supported\b
•   XVID, MPEG4 SP, ASP :
 
– Below 1280 x 720: \y60 \frame max
 
– Above 1280 x 720: \y30 \frame max
•  GMC 2 over is not supported\b
•   H\b263 is not supported\b
•   Only Samsung Techwin MJEPG is supported\b  •
  Supports up to WMA 7, 8, 9, STD
•   WMA 9 PRO does not support 2 channel excess multi channel or 
lossless audio\b
•   WMA sampling rate 22050Hz mono is not supported\b
[UC6400-6500-USA]BN68-02711D-01Eng.indb   352010-02-12   오전 10:15:36 
						

							36English
Ad\fanced Features
Playin\b	movie	continuously	(Resume	Play)
I\f you exit the pla\yying movie \function\y, the movie can be\y played later \from the point where it was stopped\b
 
✎I\f you press the ENTERE button ( Chapterin\b ) during playing the \file, you can explore scene divided into 5 chapters 
you want\b
1.	 Select the movie fil\ye you want to play \ycontinuously by pressing 
the ◄ or ► button to select \yit \from the file list se\yction\b
2.	 Press the 
� (Play) / ENTERE button\b
3.	 Select Play	Continuously (Resume Play) by p\yressing the Blue 
button\b The Movie w\yill begin to play \f\yrom where it was stopped\b
 
✎The Blue button is available when resuming play\b
 
✎I\f the Continuous	Movie	Play	Help \function is set to On 
in the Settin\bs menu, a pop-up message will appear 
when you resume play a movie \file\b
Music
Playin\b	Music
1.	 Press the ◄ or ► button to select \yMusic, then press the 
ENTER
E button in the Media	Play menu\b
2.		 Press the ◄/►/▲/▼ button to select \ythe desired Music file in 
the file list\b
3.	 Press the ENTER
E button or � (Play) button\b
 
– During music playba\yck, you can search using the ◄ and ► 
button\b
 
–
� (REW) and µ (FF) buttons do no\yt \function during p\ylay\b
 
✎Only displays the \files with MP3 and PCM \file extension\b Other 
\file extensions are not displayed, even i\f they are saved on the 
same USB device\b
 
✎I\f the sound is abnormal when playing MP3 \files, adjust the Equalizer in the Sound menu\b (An over-modulated MP3 \file 
may cause a sound problem\b)
Creatin\b	My	Playlist
1.	 Press the ◄/►/▲/▼ button to select \ythe tracks you want\y to add and press the TOO\fS button\b
2.	 Select Add	My	Playlist\b
3.		 When the Add My Play\ylist menu appears,\y select New	My	Playlist\b
 
✎To add to an old play list, simply select the play list you want to add music to\b
4.	 The newly created or updated pla\yylist will be in th\ye main Music page\b
Playin\b	My	Playlist
Select the My	Playlist \folder and it will \yplay automatically\b \yPress the ▲ or ▼ button to select \ya di\f\ferent music file with\yin the 
play list\b
Movie 01.avi 00:04:03 / 00:07:3\
8
1/1
SUM Play	continuously  E Chapterin\b  L Jump  T Tools  R Return
Resumes playing from the last viewed 
scene. Play continuously
3/15I Love you
Jhon
Music 1No SingerMusic \fNo SingerMusic 3No SingerMusic 4No SingerMusic 5No Singer
I Love You
Jhon
1st A\bbum
Pop
\f010
4.\fMB
01:10 / 04:0\f
SUME Pause   L Jump   T Tools   R Return
Playlist
[UC6400-6500-USA]BN68-02711D-01Eng.indb   362010-02-12   오전 10:15:37 
						

							37English
04Advanced	FeaturesPhotos
Viewin\b	a	Photo	(or	Slide	Show)
1.	Press the ◄ or ► button to select \yPhotos, then press the 
ENTER
E button in the Media	Play menu\b
2.		 Press the ◄/►/▲/▼ button to select \ythe desired photo in the 
file list\b
3.	 Press the ENTER
E button or � (Play) button\b
 
– While a photo list\y is displayed, press the 
� (Play) / 
ENTERE button on the remote control to start the sl\yide 
show\b
 
– All files in the fil\ye list section wil\yl be displayed in th\ye slide show\b
 
– During the slide sh\yow, files are displayed in order\b
 
✎Music \files can be automatically played during the Slide Show i\f 
the Back\bround	Music is set to On \b
 
✎The BGM	Mode cannot be changed until the BGM has \finished 
loading\b
	
¦ Playin\b	Multiple	Files	
Playin\b	selected	video/music/photo	files
1.	 Press the Yellow button in th\ye file list to sele\yct the desired file\b
2.		 Repeat the above o\yperation to select\y multiple files\b
 
✎NOTE
 
xThe c mark appears to the le\ft o\f the selected \files\b
 
xTo cancel a selection, press the Yellow button again\b 
 
xTo deselect all selected \files, press the TOO\fS button 
and select Deselect	All \b
3.		 Press the TOO\fS button and select \yPlay	Selected	Contents\b
Playin\b	the	video/music/photo	file	\broup
1.	 While a file list i\ys displayed, move to\y any file in the des\yired group\b
2.	 Press the TOO\fS button and select \yPlay	Current	Group\b
	
¦ Media	Play	-	Additional	Functions
Sortin\b	the	file	list
Press the Blue butto\yn in the file list \yto sort the files\b
Cate\bory OperationVideosMusicPhotos
	Basic 	View Displays the whole \folder\b You can view the photo by selecting the \folder\b>
>>
	Title Sorts and displays the file title in Symbol/Number/Alphabet/Special order\b>
>>
	Preference Sorts and displays the file by pre\ference\b You can change the file pre\ference in the file 
list section using the Green button\b>
>>
	\fatest 	Date Sorts and shows files by the latest date\b>
>
	Earliest 	Date Sorts and shows files by the earliest date\b>
>
	Artist Sorts the music file by artist in alphabetical order\b>
	
Album Sorts the music file by album in alphabetical order\b>
	
Genre Sorts music files by the genre\b>
	
Mood Sorts music files by the mood\b You can change the music mood in\formation\b>
	
Monthly Sorts and shows photo files by month\b>
Image1024.jpg 
        1024x768  2010/2/1 3/1\f
SUME Pause   L Previous/Next   T Tools   R Return
Normal
1/1/Movie 01.avi
SUM
Movie 01.avi Jan.10.2010
Jan.10.2010
Jan.10.2010
Jan.10.2010
Jan.10.2010 Jan.10.2010
Jan.10.2010
Jan.10.2010
Jan.10.2010
Jan.10.2010
Movie 03.avi
Movie 05.avi
Movie 07.avi
Movie 0\f.avi Movie 02.avi
Movie 04.avi
Movie 06.avi
Movie 08.avi
Movie 10.avi
 Change Device Select     Sorting  T Tools
Videos
2 files selected
Page
[UC6400-6500-USA]BN68-02711D-01Eng.indb   372010-02-12   오전 10:15:39 
						

							38English
Ad\fanced Features
Videos/Music/Photos	Play	Option	menu
During file playback\y, press the TOO\fS button\b
Cate\boryOperationVideosMusicPhotos
Title You can move directly to another Title\b
>
Repeat	Mode You can play movie and music files repeatedly\b>>
Picture	Size	
(Mode1 	/ 	Mode2 	/ 	Ori\binal) You can adjust the picture size to your pre\ference\b>
Picture
	Settin\b You can adjust the picture setting\b (p\b 16, 17, 18, 19)>>
Sound	Settin\b You can adjust the sound setting\b (p\b 19, 20)>>>
Subtitle	Settin\b You can play the video with Subtitles\b This \function only works i\f the subtitles are the 
same file name as the video\b>
Audio You can enjoy video in one o\f supported languages as required\b The \function is only 
enabled when stream-type files which support multiple audio \formats are played\b>
Stop	Slide 	Show 	/	
Start 	Slide 	Show You can start or stop a slide show\b>
Slide
	Show 	Speed You can select the slide show speed during the slide show\b>
Slide	Show 	Effect You can set various slide show e\f\fects\b>
Back\bround	Music You can set and select background music when watching a slide show\b>
Zoom You can zoom into images in \full screen mode\b>
RotateYou can rotate images in \full screen mode\b>
Home	Back\bround You can move the file to the  Media	Play  desktop\b>
Information You can see detailed in\formation about the played file\b>>>
Settin\bs
Usin\b	the	Setup	Menu
 
■ Back\bround	Settin\b: Select to display \ythe background you want\b
 
■ Continuous	 Movie	Play	Help	 (Resume	 Play)	(On	/	Off): Select to display the help pop-up message \for continuous movie 
playback\b
 
■ Get	DivX®	VOD	re\bistration	code: Shows the registration code au\ythorized \for the TV\y\b I\f you connect to \ythe DivX web site \y
and register, you can download t\yhe VOD registration file\b I\f\y you play the VOD r\yegistration using \yMedia Play, the registration 
is completed\b
 
✎For more in\formation on DivX® VOD, visit “www\bDivX\bcom\b”
 
■ Get	DivX®	VOD	deactivation	code: When DivX® VOD i\ys not registered, the registration deactiv\yation code is displ\yayed\b I\f 
you execute this \fu\ynction when DivX® \yVOD is registered, the current DivX® VOD registration is deac\ytivated\b
 
■ Information: Select to view in\y\formation about the\y connected device\b
[UC6400-6500-USA]BN68-02711D-01Eng.indb   382010-02-12   오전 10:15:39 
						

							39English
04Advanced	FeaturesAnynet+
What	is	Anynet+?	t
Anynet+ is a \functi\yon that enables you\y to control all connected Sa\ymsung devices that \ysupport Anynet+ wit\yh your Samsung 
TV’s remote\b The Anynet+ \ysystem can be used \yonly with Samsung de\yvices that have th\ye Anynet+ \feature\b To be sure your 
Samsung device has \ythis \feature, check i\f there is an Anynet+ log\yo on it\b
To	connect	to	a	Samsun\b	Home	Theater
1.	Connect the HDMI	IN (1(DVI),	2,	3 or 4) jack on the TV a\ynd the HDMI OUT jac\yk o\f the corresponding Anynet+ de\yvice 
using an HDMI cabl\ye\b
2.	 Connect the HDMI I\yN jack o\f the home \ytheater and the HDM\yI OUT jack o\f the c\yorresponding Anynet+ de\yvice using an 
HDMI cable\b
 
✎NOTE	
 
xConnect the Optical cable between the DIGITA\f	AUDIO	OUT	(OPTICA\f) jack on your T V and the Digital Audio Input 
on the Home Theater\b
 
xWhen \following the connection above, the Optical jack only outputs 2 channel audio\b You will only hear sound \from 
the Home Theater’s Front, Le\ft and Right speakers and the subwoo\fer\b I\f you want to hear 5\b1 channel audio, connect 
the DIGITA\f	AUDIO	OUT	(OPTICA\f) jack on the DVD / Satellite Box (i\be\b Anynet Device 1 or 2) directly to the 
Ampli\fier or Home Theater, not the T V\b
 
xYou can connect only one Home Theater\b
 
xYou can connect an Anynet+ device using the HDMI cable\b Some HDMI cables may not support Anynet+ \functions\b
 
xAnynet+ works when the AV device supporting Anynet+ is in the standby or on status\b
 
xAnynet+ supports up to 12 AV devices in total\b Note that you can connect up to 3 devices o\f the same type\b
TV Rear Panel Home Theater
Anynet+ 
Device 1 Anynet+ Device 
2, 3, 4
HDMI cable
(Not Supplied)
HDMI cable (Not Sup\yplied)
Optical Cable (Not\y Supplied)
[UC6400-6500-USA]BN68-02711D-01Eng.indb   392010-02-12   오전 10:15:40 
						

							40English
Ad\fanced Features
Anynet+	Menu
The Anynet+ menu ch\yanges depending on \ythe type and status\y o\f the Anynet+ devi\yces connected to th\ye TV\b
Anynet+	MenuDescription
View	TV Changes Anynet+ mod\ye to TV broadcast mode\b
Device	\fist Shows the Anynet+ de\yvice list\b
(device_name) MENU Shows the connected\y device menus\b E\bg\b I\y\f a DVD recorder is connected, t\yhe disc menu o\f 
the DVD recorder will appear\b
(device_name) INFO Shows the play menu\y o\f the connected de\yvice\b E\bg\b I\f a DVD r\yecorder is connected, t\yhe 
play menu o\f the DV\yD recorder will appear\b
Recordin\b: (*recorder) Starts recording immediately usi\yng the recorder\b (This is only ava\yilable \for devices \ythat 
support the recording \function\b)
Stop	Recordin\b: (*recorder) Stops recording\b
Receiver Sound is played through the receiver\b
I\f more than one recording device is conn\yected, they are displayed as (*recorder) and i\f only one\y recording device is 
connected, it will \ybe represented as (*device\y_name)\b
	
¦ Settin\b	Up	Anynet+	
 
OMENUm → Application → Anynet+	(HDMI-CEC) → ENTERE
 
■ Setup
Anynet+	(HDMI-CEC)	(Off	/	On): To use the Anynet+ F\yunction, Anynet+	(HDMI-CEC) must be set to On\b
 
✎When the Anynet+	(HDMI-CEC) \function is disabled, all the Anynet+ related operations are deactivated\b
Auto	Turn	Off	(No	/	Yes): Setting an Anynet\y+ Device to turn o\f\f automatically whe\yn the TV is turned o\f\f\b
 
✎The active source on the T V must be set to T V to use the Anynet+ \function\b
 
✎Even i\f an external device is still recording, it may turn o\f\f\b
	
¦ Switchin\b	between	Anynet+	Devices	
1.	 Anynet+ devices con\ynected to the TV ar\ye listed\b
 
✎I\f you cannot \find a device you want, press the Red button to re\fresh the list\b
2.	 Select a device and \ypress the ENTER
E button\b You can switch to t\yhe selected device\b
 
✎Only when you set Anynet+	(HDMI-CEC) to On in the Application menu, the Device	\fist menu appears\b
 
xSwitching to the selected device may take up to 2 minutes\b You cannot cancel the operation during the switching 
operation\b
 
xI\f you have selected external input mode by pressing the SOURCE button, you cannot use the Anynet+ \function\b 
Make sure to switch to an Anynet+ device by using the Device	\fist \b
	
¦ Recordin\b	
You can make a recording o\f a TV Program using a Samsu\yng recorder\b
1.	 Select Recordin\b\b
 
✎When there are more than two recording devices
 
xWhen multiple recording devices are connected, the recording devices are listed\b Select one recording device in 
the Device	\fist \b
 
✎When the recording device is not displayed, select Device	\fist and press the Red button to search devices\b
2.	 Press the EXIT button to exit\b
 
✎You can record the source streams by selecting Recordin\b : (device_name)\b
 
✎Pressing the � (REC) button will record whatever you are currently watching\b I\f you are watching video \from 
another device, the video \from the device is recorded\b
 
✎Be\fore recording, check whether the antenna jack is properly connected to the recording device\b To properly 
connect an antenna to a recording device, re\fer to the recording device’s users manual\b
[UC6400-6500-USA]BN68-02711D-01Eng.indb   402010-02-12   오전 10:15:40