Samsung 7000 Led Tv User Manual

							41English
04Advanced FeaturesPlaying movie continuously (Resume Play)
If you exit the playing movie function, the movie can be played later fr\
om the point where it was stopped.
 
✎If you press the ENTERE button ( Chaptering ) during playing the file, you can explore scene divided into 5 chapters 
you want.
 
✎If the index information is damaged or unsupported, you will not be able\
 to use the Chaptering function.
1.  Select the movie file you want to play continuously by pressing 
the ◄ or ► button to select it from the file list section.
2.  Press the 
� (Play) / ENTERE button.
3.  Select Play Continuously (Resume Play) by pressing the Blue 
button. The Movie will begin to play from where it was stopped.
 
✎The Blue button is available when resuming play.
 
✎If the Continuous Movie Play Help function is set to On 
in the Settings menu, a pop-up message will appear 
when you resume play a movie file.
Music
Playing Music
1.  Press the ◄ or ► button to select Music, then press the 
ENTER
E button in the Media Play menu.
2.   Press the ◄/►/▲/▼ button to select the desired Music file in 
the file list.
3.  Press the ENTER
E button or � (Play) button.
 
– During music playback, you can search using the ◄ and ► 
button.
 
–
� (REW) and µ (FF) buttons do not function during play.
 
✎Only displays the files with MP3 and PCM file extension. Other 
file extensions are not displayed, even if they are saved on the 
same USB device.
 
✎If the sound is abnormal when playing MP3 files, adjust the Equalizer in the Sound menu. (An over-modulated MP3 file 
may cause a sound problem.)
Creating My Playlist
1.  Press the ◄/►/▲/▼ button to select the tracks you want to add and press the TOOLS button.
2.  Select Add My Playlist.
3.   When the Add My Playlist menu appears, select New My Playlist.
 
✎To add to an old play list, simply select the play list you want to add music to.
4.  The newly created or updated playlist will be in the main Music page.
Playing My Playlist
Select the My Playlist folder and it will play automatically. Press the ▲ or ▼ button to select a different music file within the 
play list.
3/15I Love you
Jhon
Music 1No SingerMusic 2No SingerMusic 3No SingerMusic 4No SingerMusic 5No Singer
I Love You
Jhon
1st Album
Pop
2010
4.2MB
01:10 / 04:02
SUME Pause   L Jump   T Tools   R Return
Playlist
Movie 01.avi 00:04:03 / 00:07:38
1/1
SUM Play continuously  E Chaptering  L Jump  T Tools  R Return
Resumes playing from the last viewed 
scene. Play continuously
[UC7000_NA]BN68-02627A-06L03.indb   412010-06-25   오전 9:27:40 
						

							42English
Advanced Features
Photos
Viewing a Photo (or Slide Show)
1. Press the ◄ or ► button to select Photos, then press the 
ENTER
E button in the Media Play menu.
2.   Press the ◄/►/▲/▼ button to select the desired photo in the 
file list.
3.  Press the ENTER
E button or � (Play) button.
 
– While a photo list is displayed, press the 
� (Play) / 
ENTERE button on the remote control to start the slide 
show.
 
– All files in the file list section will be displayed in the slide sh\
ow.
 
– During the slide show, files are displayed in order.
 
✎Music files can be automatically played during the Slide Show if 
the Background Music is set to On .
 
✎The BGM Mode cannot be changed until the BGM has finished 
loading.
 
¦ Playing Multiple Files 
Playing selected video/music/photo files
1.  Press the Yellow button in the file list to select the desired file.
2.   Repeat the above operation to select multiple files.
 
✎NOTE
 
xThe c mark appears to the left of the selected files.
 
xTo cancel a selection, press the Yellow button again. 
 
xTo deselect all selected files, press the TOOLS button 
and select Deselect All .
3.   Press the TOOLS button and select Play Selected Contents.
Playing the video/music/photo file group
1.  While a file list is displayed, move to any file in the desired group.
2.  Press the TOOLS button and select Play Current Group.
 
¦ Media Play - Additional Functions
Sorting the file list
Press the Blue button in the file list to sort the files.
Category OperationVideosMusicPhotos
 Basic View Displays the whole folder. You can view the photo by selecting the folder.>
>>
 Title Sorts and displays the file title in Symbol/Number/Alphabet/Special order.>
>>
 Preference Sorts and displays the file by preference. You can change the file preference in the file 
list section using the Green button.>
>>
 Latest Date Sorts and shows files by the latest date.>
>
 Earliest Date Sorts and shows files by the earliest date.>
>
 Artist Sorts the music file by artist in alphabetical order.>
 
Album Sorts the music file by album in alphabetical order.>
 
Genre Sorts music files by the genre.>
 
Mood Sorts music files by the mood. You can change the music mood information.>
 
Monthly Sorts and shows photo files by month.>
Image1024.jpg 
        1024x768  2010/2/1 3/15
SUME Pause   L Previous/Next   T Tools   R Return
Normal
1/1/Movie 01.avi
SUM
Movie 01.avi Jan.10.2010
Jan.10.2010
Jan.10.2010
Jan.10.2010
Jan.10.2010 Jan.10.2010
Jan.10.2010
Jan.10.2010
Jan.10.2010
Jan.10.2010
Movie 03.avi
Movie 05.avi
Movie 07.avi
Movie 09.avi Movie 02.avi
Movie 04.avi
Movie 06.avi
Movie 08.avi
Movie 10.avi
 Change Device Select     Sorting  T Tools
Videos
2 files selected
Page
[UC7000_NA]BN68-02627A-06L03.indb   422010-06-25   오전 9:27:42 
						

							43English
04Advanced FeaturesVideos/Music/Photos Play Option menu
During file playback, press the TOOLS button.
Category OperationVideosMusicPhotos
Title You can move directly to another Title.
>
Repeat ModeYou can play movie and music files repeatedly.>>
Picture Size 
(Mode1 / Mode2 / Original) You can adjust the picture size to your preference.>
Picture Setting
You can adjust the picture setting. (p. 16~22)>>
Sound Setting You can adjust the sound setting. (p. 22, 23)>>>
Subtitle Setting You can play the video with Subtitles. This function only works if the subtitles are the 
same file name as the video.>
AudioYou can enjoy video in one of supported languages as required. The function is only 
enabled when stream-type files which support multiple audio formats are played.>
Stop Slide Show / 
Start Slide ShowYou can start or stop a slide show.>
Slide Show Speed
You can select the slide show speed during the slide show.>
Slide Show EffectYou can set various slide show effects.>
Background MusicYou can set and select background music when watching a slide show.>
ZoomYou can zoom into images in full screen mode.>
RotateYou can rotate images in full screen mode.>
Home BackgroundYou can move the file to the Media Play desktop.>
Information You can see detailed information about the played file.>>>
Settings
Using the Setup Menu
 
■ Background Setting: Select to display the background you want.
 
■ Continuous Movie Play Help (Resume Play) (On / Off): Select to display the help pop-up message for continuous movie 
playback.
 
■ Get DivX® VOD registration code: Shows the registration code authorized for the TV. If you connect to the DivX web site 
and register, you can download the VOD registration file. If you play the VOD registration using Media Play, the registration 
is completed.
 
✎For more information on DivX® VOD, visit “www.DivX.com.”
 
■ Get DivX® VOD deactivation code: When DivX® VOD is not registered, the registration deactivation code is displayed. If 
you execute this function when DivX® VOD is registered, the current DivX® VOD registration is deactivated.
 
■ Information: Select to view information about the connected device.
[UC7000_NA]BN68-02627A-06L03.indb   432010-06-25   오전 9:27:42 
						

							44English
Advanced Features
Anynet+
What is Anynet+? t
Anynet+ is a function that enables you to control all connected Samsung devices that support Anynet+ with your Samsung \
TV’s remote. The Anynet+ system can be used only with Samsung devices that hav\
e the Anynet+ feature. To be sure your 
Samsung device has this feature, check if there is an Anynet+ logo on it.
To connect to a Samsung Home Theater
1. Connect the HDMI IN (1(DVI), 2(ARC), 3 or 4) jack on the TV and the HDMI OUT jack of the corresponding Anynet+ 
device using an HDMI cable.
2.  Connect the HDMI IN jack of the Home Theater and the HDMI OUT jack of th\
e corresponding Anynet+ device using an 
HDMI cable.
 
✎NOTE 
 
xConnect the Optical cable between the DIGITAL AUDIO OUT (OPTICAL) jack on your T V and the Digital Audio Input 
on the Home Theater.
 
xThe ARC function enables digital output of sound using the HDMI IN 2(ARC) port and can only be operated when 
the T V is connected to an audio receiver that supports the ARC function.
 
xWhen following the connection above, the Optical jack only outputs 2 channel audio. You will only hear sound from 
the Home Theater’s Front, Left and Right speakers and the subwoofer. If you want to hear 5.1 channel audio, connect 
the DIGITAL AUDIO OUT (OPTICAL) jack on the DVD / Satellite Box (i.e. Anynet Device 1 or 2) directly to the 
Amplifier or Home Theater, not the T V.
 
xYou can connect only one Home Theater.
 
xYou can connect an Anynet+ device using the HDMI cable. Some HDMI cables may not support Anynet+ functions.
 
xAnynet+ works when the AV device supporting Anynet+ is in the standby or on status.
 
xAnynet+ supports up to 12 AV devices in total. Note that you can connect up to 3 devices of the same type.
Home Theater Anynet+ 
Device 1 Anynet+ Device 
2, 3, 4
TV Rear Panel
Optical Adapter (Supplied)
Optical Cable (Not Supplied)HDMI Cable (Not Supplied) HDMI Cable (Not Supplied)
HDMI Cable (Not Supplied)
[UC7000_NA]BN68-02627A-06L03.indb   442010-06-25   오전 9:27:43 
						

							45English
04Advanced FeaturesAnynet+ Menu
The Anynet+ menu changes depending on the type and status of the Anynet+\
 devices connected to the TV.
Anynet+ Menu Description
View TV Changes Anynet+ mode to TV broadcast mode.
Device List Shows the Anynet+ device list.
(device_name) MENU Shows the connected device menus. E.g. If a DVD recorder is connected, the disc menu of 
the DVD recorder will appear.
(device_name) INFO Shows the play menu of the connected device. E.g. If a DVD recorder is connected, the 
play menu of the DVD recorder will appear.
Recording: (*recorder) Starts recording immediately using the recorder. (This is only available for devices that 
support the recording function.)
Stop Recording: (*recorder) Stops recording.
Receiver Sound is played through the receiver.
If more than one recording device is connected, they are displayed as (*recorder) and if only one recording device is 
connected, it will be represented as (*device_name).
 
¦ Setting Up Anynet+ 
 
OMENUm → Application → Anynet+ (HDMI-CEC) → ENTERE
 
■ Setup
Anynet+ (HDMI-CEC) (Off / On): To use the Anynet+ Function, Anynet+ (HDMI-CEC) must be set to On.
 
✎When the Anynet+ (HDMI-CEC) function is disabled, all the Anynet+ related operations are deactivated.
Auto Turn Off (No / Yes): Setting an Anynet+ Device to turn off automatically when the TV is turned off.
 
✎If Auto Turn Off is set to Yes , running external devices will turn off at the same time as the T V powers off. 
However, a device may not turn off if recording is in progress.
 
✎May not be enabled depending on the device.
 
¦ Switching between Anynet+ Devices 
1.  Anynet+ devices connected to the TV are listed.
 
✎If you cannot find a device you want, press the Red button to refresh the list.
2.  Select a device and press the ENTER
E button. You can switch to the selected device.
 
✎The Device List menu will only appear when you set Anynet+ (HDMI-CEC) to On in the Application menu.
 
xSwitching to the selected device may take up to 2 minutes. You cannot cancel the operation during the switching 
operation.
 
xIf you have selected external input mode by pressing the SOURCE button, you cannot use the Anynet+ function. 
Make sure to switch to an Anynet+ device by using the Device List .
[UC7000_NA]BN68-02627A-06L03.indb   452010-06-25   오전 9:27:44 
						

							46English
Advanced Features
 
¦ Recording 
You can make a recording of a TV Program using a Samsung recorder.
1.  Select Recording.
 
✎When there are more than two recording devices
 
xWhen multiple recording devices are connected, the recording devices are listed. Select one recording device in 
the Device List .
 
✎When the recording device is not displayed, select Device List and press the Red button to search devices.
2.  Press the EXIT button to exit.
 
✎You can record the source streams by selecting Recording : (device_name).
 
✎Pressing the � (REC) button will record whatever you are currently watching. If you are watching video from 
another device, the video from the device is recorded.
 
✎Before recording, check whether the antenna jack is properly connected to the recording device. To properly 
connect an antenna to a recording device, refer to the recording device’s users manual.
 
¦ Listening through a Receiver 
You can listen to sound through a receiver (i.e Home Theater) instead of the TV Speaker.
1.  Select Receiver and set to On.
2.  Press the EXIT button to exit.
 
xIf your receiver supports audio only, it may not appear in the device list.
 
xThe receiver will work when you have properly connected the optical in jack of the receiver to the DIGITAL AUDIO 
OUT (OPTICAL) jack of the T V.
 
xWhen the receiver (i.e Home Theater) is set to On, you can hear sound output from the T V’s Optical jack. When 
the T V is displaying a DT V (air) signal, the T V will send out 5.1 channel sound to the receiver. When the source is a 
digital component such as a DVD and is connected to the T V via HDMI, only 2 channel sound will be heard from the 
receiver.
 
✎NOTE
 
xYou can only control Anynet+ devices using the T V remote control, not the buttons on the T V.
 
xThe T V remote control may not work under certain conditions. If this occurs, reselect the Anynet+ device.
 
xThe Anynet+ functions do not operate with other manufacturers’ products.
Using the ARC function
You can listen to sound through a receiver connected HDMI cable without the need for a separate optical cab\
le.
1.  Select Receiver and set to On.
2.  Press the EXIT button to exit.
 
✎To use the ARC function, a receiver which supports the HDMI-CEC and ARC features must be connected to the HDMI 
IN 2 (ARC) port.
 
✎To disable the ARC function, set the Receiver to Off . Even if the T V transmits the ARC signal continuously, the receiver 
will be blocked from receiving the signal.
[UC7000_NA]BN68-02627A-06L03.indb   462010-06-25   오전 9:27:44 
						

							47English
04Advanced Features 
¦ Troubleshooting for Anynet+
Problem Possible Solution
Anynet+ does not work. •	Check if the device is an Anynet+ device. The Anynet+ system supports Anynet+ devices only.
•	 Only one receiver (home theater) can be connected.
•	 Check if the Anynet+ device power cord is properly connected.
•	 Check the Anynet+ device’s Video/Audio/HDMI cable connections.
•	 Check whether  Anynet+ (HDMI-CEC)  is set to On in the Anynet+ setup menu.
•	 Check whether the TV remote control is in TV mode.
•	 Check whether the remote control is Anynet+ compatible.
•	 Anynet+ doesn’t work in certain situations. (Searching channels, operating  Media Play or Plug & Play  (initial 
setup), etc.)
•	 When connecting or removing the HDMI cable, please make sure to search devices again or turn your TV off 
and on again.
•	 Check if the Anynet+ Function of Anynet+ device is set on.
I want to start Anynet+. •	Check if the Anynet+ device is properly connected to the TV and check if the  Anynet+ (HDMI-CEC) is set to 
On  in the Anynet+ Setup menu.
•	 Press the  TOOLS button to display the Anynet+ menu and select a menu you want.
I want to exit Anynet+. •	Select  View TV  in the Anynet+ menu.
•	 Press the  SOURCE  button on the TV remote control and select a non- Anynet+ device.
•	 Press 
z, PRE-CH , and FAV.CH  to change the TV mode. (Note that the channel button operates 
only when a tuner-embedded Anynet+ device is not connected.)
The message “Connecting to 
Anynet+ device...” appears on the 
screen. •	
You cannot use the remote control when you are configuring Anynet+ or switching to a view mode.
•	 Use the remote control when the Anynet+ setting or switching to view mode is complete.
The Anynet+ device does not play. •	You cannot use the play function when  Plug & Play (initial setup) is in progress.
The connected device is not 
displayed. •	
Check whether or not the device supports Anynet+ functions.
•	 Check whether or not the HDMI cable is properly connected.
•	 Check whether  Anynet+ (HDMI-CEC)  is set to On in the Anynet+ setup menu.
•	 Search Anynet+ devices again.
•	 You can connect an Anynet+ device using the HDMI cable only. Some HDMI cables may not support Anynet+ 
functions.
•	 If connection is terminated because there has been a power interruption or the HDMI cable has been 
disconnected, please repeat the device scan.
The TV Program cannot be 
recorded. •	
Check whether the antenna jack on the recording device is properly connected.
The TV sound is not output 
through the receiver. •	
Connect the optical cable between TV and the receiver.
•	 The ARC function enables digital output of sound using the  HDMI IN 2(ARC) port and can only be operated 
when the TV is connected to an audio receiver that supports the ARC function.
[UC7000_NA]BN68-02627A-06L03.indb   472010-06-25   오전 9:27:44 
						

							48 English 
 Advanced Features 
  Internet@TV  
 
¦   Getting Started with Internet@TV  
  Screen Display  
 
✎   NOTE   
 
x  Configure the network settings before using   Internet@T V . For more information, refer to “Network Connection” (p. 
30). 
 
x Unsupported fonts within the provider’s content will not display normally. 
 
x Slow responses and/or interruptions may occur, depending on your network conditions. 
 
x Depending on the region, English may be the only language supported for application services. 
 
x This feature is not available in some locations. 
 
x If you experience a problem using a application, please contact the content provider. 
 
x According to circumstances of the contents provider, an application’s updates or the application itself may be 
discontinued. 
 
x Depending on your country’s regulations, some applications may have limited service or not be supported.  
INTERNET
@ TV  Internet@TV brings useful and entertaining 
contents and services directly from the web to 
your TV.  
 
O    MENU  m    →    Application    →    Content 
View    →   Internet@TV    →    ENTER  E   
  Recommended Applications: 
 Displays the recommended service by 
Samsung. You are not able to add or 
delete a service in this list.  
  Downloaded Applications: 
 Displays the downloaded applications 
through the Samsung Apps.  
  Application service: 
 You can experience 
various service by provided  samsung.  
    Internet@TV  Settings:
Edit and confi gure applications  and   Internet@TV   settings.    Controls:  
•	   
 Red (  Login  ): To log in to   Internet@TV . 
•	  B Green (  Mark as Favorite  ): To mark the applications as a favorite. 
•	   Blue (  Sort by  ): To sort the applications. 
•	  R    Return  : To return to the previous menu.  
 
✎  The color buttons may work differently depending on the application.  
  Information:
Displays notices, new  applications, and 
advertisements brought to  you by Samsung product  introductions.    TV Screen:
Displays the current channel.  
  Recommended  
  Samsung Apps     Settings    My Applications  
 
  Login       B  Mark as Favorite         Sort by        R   Return  
  by Date  1/1  
  My Applications     Recommended    by Date  1/1  
  Settings  
  Samsung Apps  
   Login       B  Mark as Favorite         Sort by        R   Return  
[UC7000_NA]BN68-02627A-06L03.indb   482010-06-25   오전 9:27:46 
						

							49English
04Advanced FeaturesAccount Login
For an application with multiple accounts, use ◄ and ► to 
access the different accounts.
 
✎For a more enjoyable application experience, register 
and log in to your account.
 
✎For instructions on creating an account, refer to 
Settings → Internet@T V ID → Create .
1.  Press the Red button in the Internet@TV home page.
2.  Select the desired User account, then press the 
ENTER
E button.
 
✎If you want to create an account, press the Red 
button; then the create account OSD window will 
appear.
3.   After selecting User account, enter the Password using 
the number button on the remote control. 
 
✎When login succeeds, User account will be 
displayed on the screen.
 
¦ Setting up Internet@TV
Settings
Create IDs and configure Internet@TV settings from this 
screen. Highlight Settings using the ▲ and ▼ buttons and 
press the ENTER
E button.  
■ System Setup
Ticker Autorun (Off / On): You can set Ticker Autorun 
to come on when powering on the TV.
 
✎The Ticker application provides useful News, 
Weather, and Stock Market information. The 
Ticker application on Internet@T V must be 
downloaded to use this feature.
 
✎Depending on your country, Ticker application 
may have a different service or not be supported.
Channel Bound Service (Off / On): Some channels 
support applications as an Internet data service, allowing 
you to access the Internet service while watching TV.
 
✎Only available if supported by the broadcaster.
Change the Service Lock password
 
✎The default password set is “0-0-0-0.”
 
✎If you forget the password you created, press the 
following sequence of remote control buttons to 
reset the password to “0-0-0-0”: POWER (off) → 
MUTE → 8 → 2 → 4 → POWER (on).
Reset: Resets Internet@TV settings to factory default 
settings.
 
■ Internet@TV ID
You can use this menu when creating and deleting 
the account. You can control your account including 
contents site’s account information. 
Create: Create an account and link it with desired 
service applications.
 
✎NOTE
 
xMaximum number of accounts is 10.
 
xMaximum number of characters is 8.
R Return
Settings
▪ System Setup
▪ Internet@TV ID
▪ Service Manager
▪ Properties▪ Ticker Autorun : Off
▪ Channel Bound Service : Off
▪ Change the Service Lock password
▪ Reset
admin
Login
User account :
Password : 
 Create    [0~9] Enter PIN    R Cancel
[UC7000_NA]BN68-02627A-06L03.indb   492010-06-25   오전 9:27:48 
						

							50English
Advanced Features
How to create Internet@TV ID
Before creating a User account, you should download 
the application first on the Samsung Apps.
1. Using the ▲/▼/◄/► button, select Settings. Then 
press the ENTER
E button.
2.  Press the ▼ button to select Internet@TV ID, then 
press the ENTER
E or ► button.
3.  Select Create. The Keypad screen will appear.
4.  The keypad OSD will be displayed on the screen.
Using the Keypad
Pressing the – button on the remote while you are 
using the Screen Keypad enables you to change the 
text fields to lower case, upper case, numbers and 
icons.
You can use this Screen Keypad in a several Internet@
TV applications.
Here is how to input characters.
4-1.  For example, suppose that you want to input 
“105Chang”.
4-2.  Press the – button on the remote twice to 
change the input mode from lower case to 
numbers.
4-3.  Press the 1, 0 and 5 button in numerical order.
4-4.  Press the – button on the remote 3 times to 
change the input mode from numbers to upper 
case.
4-5.  Press the 2 button on the remote 3 times to 
input C.
4-6.  Press the – button on the remote 3 times to 
change the input mode from upper case to 
lower case.
4-7.  Press buttons on the remote to input the rest 
of “Chang”. When done, press the ENTER
E 
button. 5. 
Using the number buttons, enter the User account 
and Password.
 
xPassword must be numbers only.
 
xYou can delete the entered character using the 
PRE-CH button.
 
xUsing the � (REW) or µ (FF) button, you 
can select icon you want to enter in icon keypad 
screen.
6.  Account created. You can use the services provided 
by all users of your Samsung TV with a single 
login by linking the users’ account to the TV ID. If 
you want to register a service site ID, select Yes. 
Service Site list will appear on the screen.
7.  Select Register of the Service Site you want, then 
press the ENTER
E button.
8.  Using number buttons, enter your application site ID 
and password. Then press the ENTER
E button.
9.  Registered successfully. If you add another service 
site, select Yes. then press the ENTER
E button, 
go to step 5.
10.  When completed, select OK. Then press the 
ENTER
E button.
Manager  
– Service Site: Register login information for service 
sites.
 
– Change Password: Change account password.
 
– Delete: Delete the account.
 
■ Service Manager: Delete and lock applications installed 
to Internet@TV.
Lock: Lock the application.
 
✎Accessing a locked application requires the 
password.
Delete: Delete the application.
 
■ Properties: Display information about Internet@TV. Use 
the Check the speed of your internet connection 
option to test your network connection.
[UC7000_NA]BN68-02627A-06L03.indb   502010-06-25   오전 9:27:48