Samsung C460 User Guide

							Wireless network setup
1712.  Using a Network-Connected Machine
6 Select Using a direct wi reless connection on the  Select the Wireless 
Setup Method  screen. Then, click  Next.
 
Even if your computer is running Windows 7 or higher, you cannot use this 
feature if your PC does not support  wireless network. Set the wireless 
network using a USB cable (see "Access point via USB cable" on page 166).
 
If below screen appears, press the   (WPS) button from the control 
panel within 2 minutes.
7 When the wireless network  set up is completed, click Next. 
8 Follow the instructions in  the installation window. 
						

							Wireless network setup
1722.  Using a Network-Connected Machine
Ad hoc via USB cable
If you do not have an access point (AP), yo u may still connect the machine 
wirelessly to your computer  by setting up an ad-hoc wireless network by 
following the si mple steps below.
Items to prepare
• Network-connected computer
• Software CD that was pr ovided with your machine
• A machine installed with  a wireless network interface
• USB cable
Creating the ad hoc network in Windows
1Turn on your computer and  the wireless network machine.
2 Insert the supplied software CD  into your CD-ROM drive.
If the installation window  does not appear, click Start > All programs > 
Accessories  > Run .
 X:\ Setup.exe  replacing “X” with the lette r, which represents your CD-
ROM drive and click OK .
3 Review and accept the installation agreemen ts in the installation 
window. Then, click  Next. 
						

							Wireless network setup
1732.  Using a Network-Connected Machine
4 Select Wireless network connection  on the Printer Connection Type  
screen. Then, click  Next.
5 On the  Are you setting up your pr inter for the first time? screen, select 
Yes, I will set up my pr inter's wireless network.  Then, click Next.
If your printer is already co nnected on the network, select  No, my 
printer is already connected to my network.
6 Select  Using a USB cable  on the  Select the Wireless Setup Method  
screen. Then, click  Next.
7 After searching the wire less networks, a list of wireless networks your 
machine has searched appears. Click  Advanced Setting.
 
•Enter the wireless Network Name:  Enter the SSID name you want (SSID 
is case-sensitive).
• Operation Mode:  Select ad hoc.
• Channel:  Select the channel. ( Auto Setting or 2412 MHz to 2467 MHz).
• Authentication:  Select an authentication type.
Open System:  Authentication is not used, and encryption may or may 
not be used, depending on the need for data security.
Shared Key: Authentication is used. A device that has a proper WEP key 
can access the network.
• Encryption:  Select the encryption  (None, WEP64, WEP128).
• Network Password: Enter the encryption  network password value.
• Confirm Network Password:  Confirm the encryption network 
password value.
• WEP Key Index:  If you are using WEP Encryption, select the appropriate 
WEP Key Index .
The wireless network security window  appears when the ad hoc network 
has security enabled.
Select  Open System  or Shared Key  for the authentication and click  Next.
• WEP (Wired Equivalent Privacy) is  a security protocol preventing 
unauthorized access to your wirele ss network. WEP encrypts the data 
portion of each packet exchanged on a wireless network using a 64-bit 
or 128-bit WEP encryption key.
  
						

							Wireless network setup
1742.  Using a Network-Connected Machine
8 The window showing the wireless network setting appears. Check the 
settings and click  Next.
 
Before entering the IP address for the machine, you must know the 
computer’s network configuration info rmation. If the computer’s network 
configuration is set to DHCP, the wireless network setting should also be 
DHCP. Likewise, if the computer’s networ k configuration is set to Static, the 
wireless network setting should also be Static.
If your computer is set to DHCP and you want to use the Static wireless 
network setting, you must contact th e network administrator to get the 
static IP address.
• For the DHCP method
If the IP address assignment method is DHCP, check if DHCP is shown in 
the  Wireless Network Setting Confirm  window. If it shows Static, click 
Change TCP/IP  to change the assignment method to  Receive IP 
address automatically (DHCP) .
• For the Static method
If the IP address assignment method is  Static, check if Static is shown in 
the  Wireless Network Setting Confirm window. If it shows DHCP, click 
Change TCP/IP  to enter the IP address and other network configuration 
values for the machine.
For example,
If the computer’s network info rmation is as shown follows:
- IP address: 169.254.133.42
- Subnet Mask: 255.255.0.0
Then, the machine’s network info rmation should be as below:
- IP address: 169.254.133. 43 - Subnet Mask: 255.255.0.0 (Use 
the computer’s subnet mask.)
- Gateway: 169.254.133. 1
 
9 The Wireless Network Setting Complete  window appears. Click Next.
10 When the wireless network settings  are completed, disconnect the USB 
cable between the computer  and machine. Click Next.
11 Follow the instructions in  the installation window. 
						

							Wireless network setup
1752.  Using a Network-Connected Machine
16 
Setup using Mac
Access point via USB cable
Items to prepare
• Access point
• Network-connected printer
• Software CD that was provided with your machine
• A machine installed with  a wireless network interface
•  USB cable
1Make sure that the machine is  connected to your computer and
powered on.
2 Insert the supplied software CD into your CD-ROM drive.
3 Double-click the CD-ROM  icon that appears on your Mac desktop.
• For Mac OS X 10.8, double-cli ck the CD-ROM that appears on Finder.
4 Double-click the MAC_Installer folder >  Installer OS X icon.
5 Click Continue .
6 Read the license agreement and click  Continue.
7 Click Agree  to agree to the  license agreement.
8 Click Install. All components necessary for  machine operations will be 
installed.
If you click  Customize , you can choose individual components to install.
9 Enter the password and click  OK. 
						

							Wireless network setup
1762.  Using a Network-Connected Machine
10 Select Configuration of Wireless network  on the Printer Connection 
Type  and click  Continue . 11 If Wireless Settings  screen appears, select  Using a USB cable and click 
Next . 
If the screen does not  appear, go to step 15. 
						

							Wireless network setup
1772.  Using a Network-Connected Machine
12 After searching, the window shows the wireless network devices. Select 
the name (SSID) of the access p oint you want to use and click Next.
 
When you set the wireless co nfiguration manually, click Advanced Setting .
• Enter the wireless Network Name:  Enter the SSID of the access point 
(SSID is case-sensitive).
• Operation Mode:  Select Infrastructure .
• Authentication:  Select an authentication type.
Open System:  Authentication is not used, and encryption may or may 
not be used, depending on the need for data security.
Shared Key: Authentication is used. A device that has a proper WEP key 
can access the network.
WPA Personal or WPA2 Personal:  Select this option to authenticate the 
print server based on the WPA Pre-Shar ed Key. This uses a shared secret 
key (generally called Pre Shared Ke y pass phrase) that is manually 
configured on the access point and each of its clients.
• Encryption:  Select the encryption. (None,  WEP64, WEP128, TKIP, AES, 
TKIP, AES)
• Network Password:  Enter the encryption network password value.
• Confirm Network Password:  Confirm the encryption network 
password value.
• WEP Key Index:  If you are using WEP Encryption, select the appropriate 
WEP Key Index .
The wireless network security window  appears when the access point has 
security enabled.
Enter the Network Password of  the access point (or router).
 
13 The window showing the wireless n etwork setting appears. Check the 
settings and click  Next.
 
• Wi-Fi Direct option appears on the screen only if your printer supports 
this feature.
• Can start to build Wi-Fi Direct by using  Samsung Easy Printer Manager 
(see  "Setting up Wi-Fi Direct" on page 186).
• Wi-Fi Direct Name : The default Wi-Fi Direct Name is the model name 
and the maximum length is 22 characters.
• Password setting is the numeric string, and the size is 8 ~ 64 characters.
 
14 The  Wireless Network Setting Complete  window appears. Click Next.
15 When the wireless network settings  are completed, disconnect the USB 
cable between the computer  and machine. Click Next. 
						

							Wireless network setup
1782.  Using a Network-Connected Machine
Access point without a USB cable (recommended)
Items to prepare
• WiFi-enabled Mac running Mac OS 10.7 or higher and an access point 
(router)
• Software CD that was pr ovided with your machine
• A machine installed with  a wireless network interface
1Make sure that the machine is  connected to your computer and
powered on.
2 Insert the supplied software CD into your CD-ROM drive.
3 Double-click the CD-ROM  icon that appears on your Mac desktop.
• For Mac OS X 10.8, double-click the CD-ROM that appears on  Finder.
4 Double-click the MAC_Installer folder > Installer OS X  icon.
5 Click Continue.
6 Read the license ag reement and click Continue.
7 Click Agree  to agree to the  license agreement.
8 Click Install. All components necessary for  machine operations will be 
installed. 
If you click  Customize , you can choose individual components to install.
9 Enter the password and click  OK.
10 Select  Configuration of Wireless network  on the Printer Connection 
Type  and click  Continue .  
						

							Wireless network setup
1792.  Using a Network-Connected Machine
11 If Wireless Settings screen appears, select  Using a direct wireless 
connection  and click Next.
If the screen does not  appear, go to step 13. 
If below screen appears, press the    (WPS) button from the control panel 
within 2 minutes.
 
12 When the wireless network  set up is completed, click Next. 
13 After the installation  is finished, click Close. 
						

							Wireless network setup
1802.  Using a Network-Connected Machine
Ad hoc via USB cable
If you do not have an access point (AP), yo u may still connect the machine 
wirelessly to your computer  by setting up an ad hoc wireless network by 
following these simple directions.
Items to prepare
• Network-connected computer
• Software CD that was pr ovided with your machine
• A machine installed with  a wireless network interface
• USB cable
Creating the ad hoc network in Mac
1Make sure that the machine is  connected to your computer and
powered on.
2 Insert the supplied software CD into your CD-ROM drive.
3 Double-click the CD-ROM  icon that appears on your Mac desktop.
• For Mac OS X 10.8, double-cli ck the CD-ROM that appears on Finder.
4 Double-click the MAC_Installer folder >  Installer OS X icon.
5 Click Continue .
6 Read the license agreement and click  Continue.
7 Click Agree  to agree to the  license agreement.
8 Click Install. All components necessary for  machine operations will be 
installed.
If you click  Customize , you can choose individual components to install.
9 Enter the password and click  OK.