Samsung CLP 550N User Manual

							7
Environmental and Safety Consideration
Laser Safety Statement
The printer is certified in the U.S. to conform to the requirements of DHHS 21 CFR, 
chapter 1 Subchapter J for Class I(1) laser products, and elsewhere, is certified as a 
Class I laser product conforming to the requirements of IEC 825.
Class I laser products are not considered to be hazardous. The laser system and 
printer are designed so there is never any human access to laser radiation above a 
Class I level during normal operation, user maintenance, or prescribed service 
condition.
WARNING 
Never operate or service the printer with the protective cover removed from Laser/
Scanner assembly. The reflected beam, although invisible, can damage your eyes.
When using this product, these basic safety precautions should always be followed to 
reduce risk of fire, electric shock, and injury to persons:
”ownloadedJ6romJManualsPrinterLcomJManuals 
						

							8
Ozone Safety
During normal operation, this machine produces ozone. The 
ozone produced does not present a hazard to the operator. 
However, it is advisable that the machine be operated in a well 
ventilated area.
If you need additional information about ozone, please contact 
your nearest Samsung dealer.
Power Saver
This printer contains advanced energy conservation technology 
that reduces power consumption when it is not in active use.
When the printer does not receive data for an extended period of 
time, power consumption is automatically lowered. 
The energy star emblem does not represent EPA endorsement of 
any product or service.
Recycling
Please recycle or dispose of packaging materials for this product 
in an environmentally responsible manner.
Correct Disposal of This Product
(Waste Electrical & Electronic Equipment)
(Applicable in the European Union and other European countries with 
separate collection systems)
This marking shown on the product or its literature, indicates that it 
should not be disposed with other household wastes at the end of its 
working life.  To prevent possible harm to the environment or human 
health from uncontrolled waste disposal, please separate this from other types of 
wastes and recycle it responsibly to promote the sustainable reuse of material 
resources.
Household users should contact either the retailer where they purchased this 
product, or their local government office, for details of where and how they can take 
this item for environmentally safe recycling.  
Business users should contact their supplier and check the terms and conditions of 
the purchase contract. This product should not be mixed with other commercial 
wastes for disposal.
OZONE
Downloaded From ManualsPrinter.com Manuals 
						

							9
Mercury Safety
LAMP(S) INSIDE THIS PRODUCT CONTAIN MERCURY AND MUST BE
RECYCLED OR DISPOSED OF ACCORDING TO LOCAL, STATE OR FEDERAL
LAWS. For details see lamprecycle.org, eiae.org, or call 1-800-Samsung.
Radio Frequency Emissions
FCC regulations
This device has been tested and found to comply with the limits for a Class B digital 
device, pursuant to Part 15 of the FCC rules. These limits are designed to provide 
reasonable protection against harmful interference in a residential installation. This 
equipment generates, uses and can radiate radio frequency energy and, if not 
installed and used in accordance with the instructions, may cause harmful 
interference to radio communications. However, there is no guarantee that 
interference will not occur in a particular installation. If this equipment does cause 
harmful interference to radio or television reception, which can be determined by 
turning the equipment off and on, the user is encouraged to try to correct the 
interference by one or more of the following measures:
1. Reorient or relocate the receiving antenna.
2. Increase the separation between the equipment and receiver.
3. Connect the equipment into an outlet on a circuit different from that to which the 
receiver is connected.
4. Consult the dealer or an experienced radio/TV technician for help.
CAUTION: Changes or modifications not expressly approved by the manufacturer 
responsible for compliance could void the user’s authority to operate the equipment.
”ownloadedJ6romJManualsPrinterLcomJManuals 
						

							10
Canadian Radio Interference Regulations
This digital apparatus does not exceed the Class B limits for radio noise emissions 
from digital apparatus as set out in the interference-causing equipment standard 
entitled “Digital Apparatus”, ICES-003 of the Industry and Science Canada.
Cet appareil numérique respecte les limites de bruits radioélectriques applicables aux 
appareils numériques de Classe B prescrites dans la norme sur le matériel brouilleur: 
“Appareils Numériques”, ICES-003 édictée par l’Industrie et Sciences Canada.
United States of America
Federal Communications Commission (FCC)
Intentional emitter per FCC Part 15
Low power, Radio LAN type devices (radio frequency (RF) wireless communication 
devices), operating in the 2.4 GHz Band, may be present (embedded) in your printer 
system. This section is only applicable if these devices are present. Refer to the 
system label to verify the presence of wireless devices.
Wireless devices that may be in your system are only qualified for use in the United 
States of America if an FCC ID number is on the system label.
The FCC has set a general guideline of 20 cm (8 inches) separation between the 
device and the body, for use of a wireless device near the body (this does not include 
extremities). This device should be used more than 20 cm (8 inches) from the body 
when wireless devices are on. The power output of the wireless device (or devices), 
which may be embedded in your printer, is well below the RF exposure limits as set 
by the FCC.
This transmitter must not be collocated or operation in conjunction with any other 
antenna or transmitter.
Operation of this device is subject to the following two conditions:(1) This device may 
not cause harmful interference, and(2) this device must accept any interference 
received, including interference that may cause undesired operation of the device.
Wireless devices are not user serviceable. Do not modify them in any 
way. Modification to a wireless device will void the authorization to use 
it. Contact manufacturer for service.
FCC Statement for Wireless LAN use:
“While installing and operating this transmitter and antenna combination 
the radio frequency exposure limit of 1mW/cm2 may be exceeded at 
distances close to the antenna installed. Therefore, the user must  
maintain a minimum distance of 20cm from the antenna at all times. 
This device can not be colocated with another transmitter and 
transmitting antenna.”
”ownloadedJ6romJManualsPrinterLcomJManuals 
						

							11
Declaration of Conformity (European Countries)
Approvals and Certifications
The CE marking applied to this product symbolises Samsung 
Electronics Co., Ltd. Declaration of Conformity with the following 
applicable 93/68/EEC Directives of the European Union as of the 
dates indicated:
January 1, 1995: Council Directive 73/23/EEC Approximation of the laws of the 
member states related to low voltage equipment.
January 1, 1996: Council Directive 89/336/EEC (92/31/EEC), approximation of the 
laws of the Member States related to electromagnetic compatibility.
March 9, 1999: Council Directive 1999/5/EC on radio equipment and 
telecommunications terminal equipment and the mutual recognition of their 
conformity.
A full declaration, defining the relevant Directives and referenced standards can be 
obtained from your Samsung Electronics Co., Ltd. representative.
EC Certification
Certification to 1999/5/EC Radio Equipment & Telecommunications 
Terminal Equipment Directive (FAX)
This Samsung product has been self-certified by Samsung for pan-European single 
terminal connection to the analogue public switched telephone network (PSTN) in 
accordance with Directive 1999/5/EC. The product has been designed to work with 
the national PSTNs and compatible PBXs of the European countries:
In the event of problems, you should contact the Euro QA Lab of Samsung Electronics 
Co., Ltd. in the first instance.
The product has been tested against TBR21 and/or TBR 38. To assist in the use and 
application of terminal equipment which complies with this standard, the European 
Telecommunication Standards Institute (ETSI) has issued an advisory document (EG 
201 121) which contains notes and additional requirements to ensure network 
compatibility of TBR21 terminals. The product has been designed against, and is fully 
compliant with, all of the relevant advisory notes contained in this document.
European Radio Approval Information
(for products fitted with EU-approved radio devices)
This Product is a printer; low power, Radio LAN type devices (radio frequency (RF) 
wireless communication devices), operating in the 2.4 GHz band, may be present 
(embedded) in your printer system which is intended for home or office use. This 
section is only applicable if these devices are present. Refer to the system label to 
verify the presence of wireless devices.
”ownloadedJ6romJManualsPrinterLcomJManuals 
						

							12
Wireless devices that may be in your system are only qualified for use in the 
European Union or associated areas if a CE mark with  a Notified Body 
Registration Number and the Alert Symbol is on the system label.
The power output of the wireless device or devices that may be embedded in you 
printer is well below the RF exposure limits as set by the European Commission 
through the R&TTE directive.
European States qualified under wireless approvals:
EU                     Austria, Belgium, Denmark, Finland, France (with frequency
                         restrictions), Germany, Greece, Ireland, Italy, Luxembourg, 
                         The Netherlands, Portugal, Spain, Sweden and the United
Accept EU         Iceland, Liechtenstein, Norway and Switzerland
European States with restrictions on use:
EU                       In France, the frequency range is restricted to 2446.5-2483.5 MHz
                         for devices above 10 mW transmitting power such as wireless
Accept EU         No limitations at this time.
Regulatory Compliance Statements
Wireless Guidance
Low power, Radio LAN type devices (radio frequency (RF) wireless communication 
devices), operating in the 2.4 GHz Band, may be present (embedded) in your printer 
system. The following section is a general overview of considerations while operating 
a wireless device.
Additional limitations, cautions, and concerns for specific countries are listed in the 
specific country sections (or country group sections). The wireless devices in your 
system are only qualified for use in the countries identified by the Radio Approval 
Marks on the system rating label. If the country you will be using the wireless device 
in, is not listed, please contact your local Radio Approval agency for requirements. 
Wireless devices are closely regulated and use may not be allowed.
The power output of the wireless device or devices that may be embedded in your 
printer is well below the RF exposure limits as known at this time. Because the 
wireless devices (which may be embedded into your printer) emit less energy than is 
allowed in radio frequency safety standards and recommendations, manufacturer 
believes these devices are safe for use. Regardless of the power levels, care should 
be taken to minimize human contact during normal operation.
As a general guideline, a separation of 20 cm (8 inches) between the wireless device 
and the body, for use of a wireless device near the body (this does not include 
”ownloadedJ6romJManualsPrinterLcomJManuals 
						

							13
extremities) is typical. This device should be used more than 20 cm (8 inches) from 
the body when wireless devices are on and transmitting.
This transmitter must not be collocated or operation in conjunction with any other 
antenna or transmitter.
Some circumstances require restrictions on wireless devices. Examples of common 
restrictions are listed below:
Radio frequency wireless communication can interfere with equipment 
on commercial aircraft. Current aviation regulations require wireless 
devices to be turned off while traveling in an airplane. 802.11B (also 
known as wireless Ethernet) and Bluetooth communication devices are 
examples of devices that provide wireless communication.
In environments where the risk of interference to other devices or 
services is harmful or perceived as harmful, the option to use a wireless 
device may be restricted or eliminated. Airports, Hospitals, and Oxygen 
or flammable gas laden atmospheres are limited examples where use of 
wireless devices may be restricted or eliminated. When in environments 
where you are uncertain of the sanction to use wireless devices, ask the 
applicable authority for authorization prior to use or turning on the 
wireless device.
Every country has different restrictions on the use of wireless devices. 
Since your system is equipped with a wireless device, when traveling 
between countries with your system, check with the local Radio Approval 
authorities prior to any move or trip for any restrictions on the use of a 
wireless device in the destination country.
If your system came equipped with an internal embedded wireless 
device, do not operate the wireless device unless all covers and shields 
are in place and the system is fully assembled.
Wireless devices are not user serviceable. Do not modify them in any 
way. Modification to a wireless device will void the authorization to use 
it. Please contact manufacturer for service.
Only use drivers approved for the country in which the device will be 
used. See the manufacturer System Restoration Kit, or contact 
manufacturer Technical Support for additional information.
”ownloadedJ6romJManualsPrinterLcomJManuals 
						

							14
EU Declaration of Conformity (LVD,EMC)
For the following product :
Manufactured at :
We hereby declare, that all major safety requirements, concerning to CE Marking
Directive[93/68/EEC] and Low Voltage Directive [73/23/EEC], ElectroMagnetic Compatibility
[89/336/EEC], amendments [92/31/EEC] are fulfilled, as laid out in the guideline set down
by the member states of the EEC Commission.
This declaration is valid for all samples that are part of this declaration, which are
manufactured according to the production charts appendix.The standards relevant for the evaluation of safety & EMC requirements are as follows :LVD : EN60950:2000, IEC60950:1999, EN60825-1:1994inc A1:1996/IEC60825-1:1993incA1:1997
EMC : EN55022:1998incA1:2000, EN61000-3-2:2000, EN61000:3-3:1995incA1:2001, EN55024:1998incA1:2001, AS/NZS3548:1995, EN61000:4-2:1995, EN61000:4-1996,
EN61000:4-4:1995, EN61000:4-5:1995, EN61000:4-6:1996, EN61000:4-11:1994
1. Certificate of conformity / Test report issued by :
LVD : TUV Rheinland
EMC : SAMSUNG Electronics EURO Q.A. Lab. in the U.K.
2. Technical documentation kept as :
Samsung Electronics Co.,Ltd.
#259,Gongdan-Dong,Gumi-City
Gyungbuk, Korea 730-030
Whan-Soon Yim / Senior Manager
(place and date of issue) (name and signature of authorized person)
Color Laser Beam Printer
(Product name)
CLP-550, CLP-550N
(Model Number)
1) Samsung Electronics Co.,Ltd. #259, Gongdan-Dong, Gumi-City, Gyungbuk ,KOREA. 730-030
2) Shandong Samsung Telecommunications Co., Ltd. Sanxing Road, Weihai Hi-tech, IDZ Shandong Province, 264 209, China Place: M264
(factory name, address)
Samsung Electronics Co.,Ltd.
(Manufacturer)
Samsung Electronics Euro QA Lab.
Blackbushe Business Park, Saxony Way
Yateley, Hampshire, GU46 6GG, UK
Yong-Sang Park / Manager
(place and date of issue)
(name and signature of authorized person)
(Representative in the EU)
Downloaded From ManualsPrinter.com Manuals 
						

							1
INTRODUCTION
Congratulations on the purchase of your printer! 
This chapter includes:
• Special Features
• Printer Components
*ownloadedMKromM~anualsPrinter9comM~anuals 
						

							INTRODUCTION1.2
Special Features
Your new printer is equipped with special features that improve 
the print quality. You can:
Print in color with excellent quality and speed
• You can print in a full range of colors using cyan, magenta, 
yellow, and black.
• You can print up to 1200 x 1200 dpi (effective output). 
See page 4.9.
• In black & white mode your printer prints A4-sized paper 
at 20 ppm and letter-sized paper at 21 ppm (pages per 
minute). For color printing, A4/letter-sized paper prints at 
5 ppm.
• In duplex printing, your printer prints A4/Letter sized 
paper at 9.6 IPM (images per minute) for black & white 
and 5 IPM for color.
Handle paper flexibly
•
Multi-purpose Tray supports letterhead, envelopes, 
labels, transparencies, custom-sized materials, postcards, 
and heavy paper. A 100-sheet 
Multi-purpose Tray 
supports plain paper.
• The
 Standard 250-sheet input tray (Tray1) and optional 
500-sheet input tray
 (Tray2) supports A4/letter-sized 
paper.
Create professional documents
• Print 
Watermarks. You can customize your documents 
with words, such as “Confidential.” See page 5.10.
• Print 
Booklets. This feature enables you to easily print the 
pages to create books. Once printed, all you have to do is 
to fold and staple the pages. See page 5.9.
• Print 
Posters. The text and pictures of each page of your 
document are magnified and printed across the sheet of 
paper and taped together to form a poster. See page 5.7.
98
Downloaded From ManualsPrinter.com Manuals